SAMDaily.us | PRESOL | 51 | 51--FMP Expendables

SAMDAILY.US - ISSUE OF FEBRUARY 06, 2022 SAM #7372
SOLICITATION NOTICE

51 -- 51--FMP Expendables

Notice Date: 2/4/2022 12:06:26 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 315990 — Apparel Accessories and Other Apparel Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: FBNC23AML0031
Response Due: 2/9/2022 8:00:00 AM
Archive Date: 08/08/2022
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FBNC23AML0031 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 315990 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-02-09 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Bragg, NC 28310 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Force Protection Gear Bag FOR103 Sherpa Deployment Bag or equal Padded 103L Bag with 5 zippered pockets on the opening flap. Industrial Strength zipper opening flap. Bag must have industrial strength wheels. FPG Wheels and Stainless Steel Wheels Housings, as well as padded packstraps for rucking it. With Sherpa you get a higher profile wall structure, 4, EA; LI 002: Noise Fighters SIGHTLINES | Gel ear pads with a relief cut for glasses Standard Adhesive Model Bottom line: these are upgraded gel ear pads that are the first with our patented concept (U.S. Patent No. 10,841,686 and U.S. Patent D0868025) with relief cuts for glasses to pass through without breaking the noise seal and causing headaches from increased clamping pressure. Our latest design features a rim to slide under the clips on headsets like Impact� Sport and a non-permanent, pressure-sensitive adhesive for a much more secure fit and peel + stick compatibility with snap-in plastic adapter plates (available separately) to fit headsets from dozens of manufacturers. Best results with straight-style glasses arms, and our super-soft and flexible silicone gel produces an amazing seal with other types of glasses arms. Our unique horseshoe-ring shaped, grooved front face and 1/4"" inch of silicone gel provide significantly better softness and sealing vs. competitors' pads. Please check out the reviews page to read more about our pads' pillow-like comfort level. When headset is lowered as much as possible, glasses arms can be dropped into relief cuts and will sit in a protected channel just above the ear. Using the relief cuts is completely optional. Our gel pads work like normal pads when glasses are not in use. Use of super-premium acoustic memory foam and allowing for a closed head seal leads to impressively better sound deadening., 12, EA; LI 003: Noise Fighters Sightlines Adapter Plates for Peltor� ComTac� and similar headsets | CLONE OF HY79 / HY80 HYGIENE KIT PLATES Compatible with 3M� PELTOR� COMTAC� II / III / V / VI / XP / XPI, 12, EA; LI 004: S-BRMP Bipod or equal Features: Extends from 6� to 9� Direct attachment to a Picatinny Rail only Swivels (tilts) to compensate for uneven terrain Notched Legs are spring loaded for fast deployment (What�s this?) Ultralight weight � 13 oz Has a built-in sling swivel stud to attach the sling Most useful for shooting off the bench Heat treated steel and hard alloys Hard Rubber Leg Caps Polymer knob, 8, EA; LI 005: Flatline Ops HALO-X� SCOPE LEVEL 34mm Black or equal Vial-Bridge� dual vial connection points and suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition in all outdoor and harsh conditions. � Jaw-Bone� barrel hinge point for easy installation. � Single top strap screw for ease of installation and access. � Ultra-light, high strength 7075-T6 aircraft aluminum. � Mil Spec Type III hard anodizing for durability � Built for left or right handed shooters Weight: .475 ounces Width: 5/16"" - .3125 in, 6, EA; LI 006: Flatline Ops HALO-X� SCOPE LEVEL 35mm FDE or equal Vial-Bridge� dual vial connection points and suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition in all outdoor and harsh conditions. � Jaw-Bone� barrel hinge point for easy installation. � Single top strap screw for ease of installation and access. � Ultra-light, high strength 7075-T6 aircraft aluminum. � Mil Spec Type III hard anodizing for durability � Built for left or right handed shooters Weight: .475 ounces Width: 5/16"" - .3125 in, 2, EA; LI 007: SUREFIRE SOCOM FAST-ATTACH� SUPPRESSOR TRAINERS or equal 5.56mm Tan Mimic the weight and dimensions of SureFire SOCOM Fast-Attach� suppressors Allow multiple training ammunition and live ammunition options Provide no sound reduction Train Smarter. SureFire Suppressor Trainers are intended for use with marking cartridges (e.g. Simunition� FX�, and UTM), training ammunition (e.g. SRTA), frangible and live ammunition in a training environment. The SureFire Trainers mimic the length, weight and attachment of SureFire SOCOM Fast-Attach� suppressors, allowing warfighters to train as they would fight when participating in force on force training scenarios. Every SureFire Suppressor Trainer is made in the U.S.A., 12, EA; LI 008: Sure Fire DS07 Weaponlight Switch or equal Tan Must work with Miniscout Pro Push-button switch with plug-assembly and 7-inch plug-in tape switch Tape switch provides reliable momentary-on light activation Integrated and remote switch assemblies operate independently DS00 click on/off push-button switch Plug-in ST07 with 7-inch cable length and momentary-on pressure pad Cable length fits most rifle/carbine applications O-ring sealed for durability in adverse weather conditions UPC DS07-TN 084871327565, 12, EA; LI 009: US Army TRADOC Die Cut Photo Terrorist Target (Version 8) or equal SKU TRADOC-8, 250, EA; LI 010: Osama Bin Laden Terrorist Photo Target or equal SKU 1RT, 250, EA; LI 011: Tactical Firearms Training Team Terrorist Target - Man w/ Rifle (B&W) SKU TFTT-01, 250, EA; LI 012: Urban Street Violence Situational Photo Target (Version 2) or equal SKU USV-2, 250, EA; LI 013: Man in T-Shirt w/ Gun Split Second Target or equal SKU LE-8, 250, EA; LI 014: Man in Tank Top w/ Gun Split Second Target or equal SKU LE-11, 250, EA; LI 015: Man in Overalls w/ Gun Split Second Target or equal SKU LE-12, 250, EA; LI 016: Man w/ Gun Split Second Target or equal SKU- LE-23, 250, EA; LI 017: OpsGear Real Threat Insurgent Target or equal SKU OPS-INSURGENT, 250, EA; LI 018: US Army TRADOC Die Cut Photo Terrorist Target (Version 1) or equal SKU TRADOC-1, 250, EA; LI 019: IPSC/USPSA Cardboard Torso Target or equal SKU IPSC-CB, 500, EA; LI 020: Viking Tactics Double Sided Advanced Training Target or equal VTAC-P, 500, EA; LI 021: 3M 13.8 oz. Super 77 Multipurpose Spray Adhesive or equal Effective spray glue provides a secure bond in 15 seconds to 30 minutes Allows for quick repositioning for perfect placement Ideal for light-duty materials including paper, fabric, felt, wood, cork, flexible foam, plastic film, foil, cardboard, fiberglass insulation, plastic, glass, rubber, leather, vinyl and more, 100, EA; LI 022: Deluxe Target Paster Gun or equal SKU MTT �Extremely easy drop-in loading. �Drop-in a roll of 1000 large (1"" x 1 1/4"") rectangular self adhesive pasters, squeeze the trigger(handle) and touch the target. �No more boxes that don't work or rolls that unroll after removing the first paster. �Fast, you can apply pasters as fast as you can squeeze the trigger(handle.) �Durable, drop tested extensively to withstand the harshest environments., 6, EA; LI 023: Roll of 1000 1"" x 1 1/4"" Self Adhesive Target Pasters (Brown) APBR Compatible with CLIN016, 10, EA; LI 024: Roll of 1000 1"" x 1 1/4"" Self Adhesive Target Pasters (White) APBR Compatible with CLIN016, 10, EA; LI 025: Roll of 1000 1"" x 1 1/4"" Self Adhesive Target Pasters (Black) APBK Compatible with CLIN016, 10, EA; LI 026: 3M� PELTOR� COMTAC� ACH Dual Comm Kit - SOCOM, Coyote Brown, 88901-000001 EA/Case or equal 3M Product Number 88901-00000, 3M ID 70071613882, UPC 00093045936144 Attenuation 20 dB, 23 dB Battery Life Approx. 500 hours Battery Type AAA Brand PELTOR� Communication Direction Two-way Communication Type Tactical Comms Communication via External 2-Way Radio Yes Hearing Protection Style Earmuffs Hearing Protection Type Foldable Headband In-Ear Solutions No Intrinsically Safe No Level Dependent Function for Ambient Listening Yes Market Soldier Microphone Class/Type Dynamic Plug Type Dual NEXUS� TP-120 (NATO) Product Color Coyote Brown Product Type MIL/LE Tactical Headsets Purpose Military/Police Recommended Industry Military Tactical Specifications Met ANSI S3.19-1974 Suspension Method Headband Tactical Communication Protection System (TCAPS) Yes Pre-assembled COMTAC kits include: Headset, adapter (PTT), bag, batteries, and gel ear cushions. Headband kits also include two oblong ZORBIUM� ACTION PADS (ZAP�) to accommodate headband headset integration within ground combat helmets Kit includes MT17H682FB-19 CY with gel cushions, PTT FL-U94A with shorten cable, FP9007-DRAW Coyote Brown Drawstring Bag and batteries, 4, EA; LI 027: 3M� PELTOR� ARC, Left & Right Side Attachments. 2 arc rails for left and right side Left and right guide arm attachments for mounting the headset onto a helmet rail system Accessory Rail Connector (ARC) 3M� PELTOR� ARC Adapters, Left & Right Side Attachment Kit, Conversation Kit to fit the FAST Helmet Rail Connection system, 4, EA; LI 028: U94 GEN2 Tactical PTT or equal U94 has a protective boot that seals around the headset connector The removable back clip allows for right or left side wear., 16, EA; LI 029: 32 in. x 80 in. Solid Core Interior Door Slab cut for right handed door knob 1-3/4 in thick, 20, EA; LI 030: 32 in. x 80 in. Hollow Core Interior Door Slab cut for right handed door knob 1-3/4 in thick, 30, EA; LI 031: 32 in. x 80 in. Steel Exterior Door Slab cut for right handed door knob 1-3/4 in thick, 5, EA; LI 032: Stainless Steel Bed and Bath Door Knob or equal Easy installation and replacement with just a Phillips screwdriver Included hardware for easy installation Privacy lockset includes 2 knobs 1 for each side of the door Locks from the inside with a turn button and unlocks from the outside with a coin or flat piece of metal Reversible for use with right and left swing doors ANSI Grade 3 rated for residential interior applications, 55, EA; LI 033: 3-1/2 in. x 5/8 in. Radius Satin Nickel Door Hinge or equal 5 knuckle full mortise design. The removable pin provides easier installation or removal of door. Easy to install. Made of steel Satin nickel finish Screws included 3-1/2 in. x 3-1/2 in. hinges Ideal for most interior residential doors Removable pin provides easy installation or removal of a door, 110, EA; LI 034: 1""x2""x 8' grade 2 lumber, 40, EA; LI 035: 2""x 4"" x 8' grade 2 lumber, 40, EA; LI 036: DEWALT 20-Volt MAX XR Cordless Brushless 1/2 in. Drill/Driver Kitw/20-Volt 1/2 in. Impact Wrenchw/Detent Pin (Tool-Only) or equal 20-Volt cordless impact wrench DCF880B crams into tight spaces and delivers a hearty 1800 in. lbs. of torque. XR lithium-ion batteries with fuel gauge provide 33% more capacity over standard-packs Compact (6.9 in. front to back), lightweight (3.4 lbs.) design fits into tight areas High speed transmission with 2-speed settings (0 RPM to 550 RPM/0 RPM to 2,000 RPM) delivers up to 30% faster application speeds Ergonomic comfort grip handle provides ideal balance and tool control Metal 1/2 in. ratcheting chuck for superior bit gripping strength 3-mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model LED spotlight mode features 20-minute shutoff function allowing for extended work time in dark or confined spaces DCF880B maximum no-load speed of 2300 RPM (trigger-sensitive) DCF880B confidently drive and remove fasteners in concrete, metal or wood DCF880B works with 20-Volt max lithium-ion battery and charger (sold separately) DCF880B Sure-Grip handle is textured for command and comfort DCF880B 3-year limited warranty, 2, EA; LI 037: Shipping and Handling, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/c0ad0fa0c41d406683daf9b85fabfc29/view)
Place of Performance: Address: X6066 African Lion Blvd ATTN: PBO/ CW2 Pleitez, Fort Bragg, NC 28310, USA; Zip Code: 28310; Country: USA
Record: SN06233838-F 20220206/220204230110 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

51 -- 51--FMP Expendables