Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF FEBRUARY 07, 2022 SAM #7373
SOURCES SOUGHT

65 -- Medrad Stellant Flex OCS CT Injection System (Delivery for VA Pittsburgh) Brand Name Only. This is not a request for quotes.

Notice Date

2/5/2022 10:45:32 AM
 

Notice Type

Sources Sought
 

NAICS

334510 — Electromedical and Electrotherapeutic Apparatus Manufacturing
 

Contracting Office

244-NETWORK CONTRACT OFFICE 4 (36C244) PITTSBURGH PA 15215 USA
 

ZIP Code

15215
 

Solicitation Number

36C24422Q0387
 

Response Due

2/11/2022 1:30:00 PM
 

Archive Date

05/12/2022
 

Point of Contact

Allan Tabliago, Contract Specialist, Phone: 215-823-5800
 

E-Mail Address

allan.tabliago@va.gov
(allan.tabliago@va.gov)
 

Awardee

null
 

Description

THIS IS NOT A SOLICITATION ANNOUNCEMENT. THIS IS A REQUEST FOR INFORMATION ONLY. This Request for Information (RFI) is intended for information and planning purposes only at this time; and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs. Because this is a Request for Information announcement, no evaluation letters and/or results will be issued to the respondents. This Sources Sought Notice is for market research purposes only and shall not be considered an Invitation for Bids, Request for Quotations, or a Request for Proposal. Do not submit a proposal or quote. This market research is issued for information and planning purposes only and does not constitute a solicitation nor does it restrict the Government as to the ultimate acquisition approach. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Additionally, there is no obligation on the part of the Government to acquire any products or services described in this sources sought notice. You will not be entitled to payment for direct or indirect costs that you incur in responding to this Sources Sought Notice. Any contract that might be awarded based on information received or derived from this market research will be the outcome of a competitive process. Interested parties are responsible for adequately marking proprietary, restricted or competition sensitive information contained in their response. No solicitation exists. Therefore, do not request a copy of a solicitation. See instructions on page 7. Medrad Stellant Flex CT Injection System with OCS (Brand Name Only) INTRODUCTION/BACKGROUND: The MEDRAD Stellant Flex CT Injection System with enables the flexibility of injecting contrast and saline-offering many clinical and workflow advantages, such as: using saline to perform a patency check, reducing image artifacts and providing brighter arterial imaging in CT. OBJECTIVE: The Department of Veterans Affairs, VISN 04, Pittsburgh VA Medical Center-Radiology Department Pittsburgh, PA hereby referred to as the VAMC Pittsburgh (646), is requesting the replacement of its current CT Contrast Injectors. The current equipment has entered the end-of-life stage, therefore the requirement is a Brand Name only acquisition of the following: Medrad Stellant Flex CT Injection System with OCS MAJOR REQUIREMENTS: The Contractor/Vendor must complete the following tasks to meet the needs of this acquisition: Salient Characteristics Contrast Delivery Referrers rely on prompt, accurate diagnoses to guide therapy and enable improved patient outcomes. Precise contrast delivery is expected for consistency to allow optimal image quality.   Protocol management and precise contrast delivery Perform complex CTA and cardiac CT protocols Create a tight contrast bolus Enable precisely timed contrast delivery Individualize contrast dose with Certegra P3T 2.0   Dual syringe utilization benefits DualFlow, simultaneous injection of contrast and saline in user-selected ratios can: Enable better visualization of the right heart due to reduction of streak artifacts Visualize the right coronary arteries and right ventricles in a single study by achieving more uniform attenuation Workflow Enhanced protocol management and injector design that enable efficiency improvements. A simple workflow can help to save procedure time, avoid errors Simple to use, automated injection system Streamline workflow Integrated saline test injection with real-time pressure monitoring Snap-on/twist-off syringe design Plungers automatically advance and retract when attaching and detaching syringes Automatic filling and priming Multiphase programming, including hold/pause feature Programmable pressure limit Accurate post-study documentation Improve reporting accuracy Achieve workflow efficiencies Enables reduction of errors and information gaps Multi-Patient Syringe System Cost efficiency Perform multiple studies with a single syringe kit (for up to 12 hours) Recessed connections to avoid accidental contamination Multi-patient tube for reuse plus single-patient tube that needs to be replaced after each study Special check valves that prevent backflow from the patient Scalability Certegra P3T 2.0 Software recommending personalized injection protocols Personalized patient protocols allow technologists to individualize contrast dose protocols individually at the point of care with ease Abdomen studies Pulmonary angiography studies Cardiac studies   Certegra Imaging System Interface (ISI) Scanner connectivity Certegra ISI 700 (for Philips scanners) Certegra ISI 800 (for Siemens and Toshiba scanners) Certegra ISI 900 (for Siemens, Toshiba, Hitachi and General Electric scanners) Connect.CT sold as Philips SyncRight (for Philips scanners)   Contrast Dose Management (CDM) CDM automates documentation of contrast injection at the point of care and throughout the post-procedure workflow. CDM provides tools to help drive efficiency, reproducible quality and personalized care Auto-populate contrast injection records transferred to PACS, RIS and Speech Reporting (SR) Achieve workflow efficiencies Improve reporting accuracy Automate documentation Use data to inform improvement initiatives Accelerate report turnaround time Investigate and tie information to outcomes Less time preparing for the injection and more time to focus on the patient and optimize procedure management Seamless Network Communication with RadimetricsTM Enterprise Platform for Contrast Dose Management Connect with the Radimetrics Enterprise Platform for automated documentation and viewable patient histories to enhance operational consistency Convenience at Point of Care On-board eGFR and Weight Based Dosing Calculators, an Injection Pressure Graph and independent Test Inject and KVO functions are convenient features located right on the Injection System Accurately capture contrast information at the source and automatically populate workstation data fields with the Barcode Reader Real-time Support Connect to VirtualCARE Remote Support for advanced injector system diagnostics, seamless software updates and fast repairs Deliver with Confidence in Quality The next generation in MR consumables Bayer stands behind. Designed, tested and warranted as part of the Total MR SMART Injection System Improved Efficiencies For Workflow and Automated Fluid Delivery Snap-on/twist-off syringe design Automatic plunger advance and retract when attaching and detaching syringes Automatic filling and priming Injection pressure graph Personalized Care Through Convenience at Point of Care Patient-Centric workflow design Modality worklist connectivity Protocol storage/retrieval On-board eGFR and Weight Based Dosing Calculators Injection enabled when head is tilted down Reproducible Quality To Enhance Operational Consistency Proven company track record of design and performance Automated data capture Interface with PACS/RIS/SR Export DICOM secondary capture to PACS Mechanical Specifications Dual Injector Head Height 15.5 cm (6.1 ) Width 30.7 cm (12.1 ) Depth 36.8 cm (14.5 ) Weight 8.1 kg (17.9 lb.) (without syringe) Base Unit Height 29.2 cm (11.5 ) Width 27.9 cm (11.0 ) Depth 22.2 cm (8.8 ) Weight 6.2 kg (13.6 lb.) Certegra Workstation (CWS) Height 34.2 cm (13.5 ) Width 40.0 cm (15.8 ) Depth 30.0 cm (10.2 ) Weight 8.0 kg (17.6 lb.) Injection Specs Flow rate (range & increments) 0.1 10 mL/sec in 0.1 mL increments Volume (range & increments) 1 mL to syringe capacity in 1 mL increments Programmable pressure limit (psi/kPa) 200 mL syringe: 325 psi, 2241 kPa Scan delay 0 300 seconds (5 minutes) in 1 second increments Pause 1 900 seconds (15 minutes) in 1 second increments Hold Maximum HOLD time is 20 minutes Syringes (volume capacity) 200 mL sterile disposable syringe Maximum number of phases 6 Electrical requirements (VAC/Hz) 100 240 VAC, 50/60 Hz, 300 Volts-AMPs Syringe heat maintainer 35 degrees C ±5 degrees, 95 degrees F ±9 degrees Head mounting options Overhead counterpoise system or floor pedestal (floor pedestal includes an integral IV pole) DualFlow Simultaneous injection of contrast and saline is integrated in the CWS and included Certegra P3T Cardiac Application Cardiac CTA Protocol Optimization Software Certegra P3T Abdomen Application Abdominal Protocol Optimization Software Certegra P3T Pulmonary Angiography Application Pulmonary Angiography Protocol Optimization Software Informatics Starter Package Access to modality worklist and database of injections PACS Outbound Interface Send secondary capture of contrast injection to PACS RIS Outbound Interface Send contrast injection information to RIS Speech Recognition Outbound Interface Send contrast injection information to Speech Recognition System Imaging System Interfacing (ISI) Several types of interfacing with the scanner VirtualCare Remote service on the injector and software to ensure faster uptime Table Line Item Part No. Description Qty 0001 Stellant Flex OCS Medrad Stellant Flex OCS CT Injection System 1 0002 INS SCT FLEX CS Installation-Medrad Stellant Flex OCS CT Injection System-Overhead Counterpoise System 1 0003 FLEXD-200-SCS 2-200 ml FLEX syringes, 60 patient Tubing with T-connector, 1 large saline spike and 1 small contrast spike/20 per box 1 0004 Flex OCS Medrad Stellant Flex OCS CT Injection System 1 0005 CDM-POC-FLEX-Package Contrast Dose Management Certegra CT Point of Care software 1 0006 INS SCT FLEX CS IN Installation Medrad Stellant FLEX CT Injection System with Informatics - OCS Mount 1 0007 MIS SVS INT - Package Contrast Dose Management Certegra Point of Care software implementation fee 1 0008 CDM-PACS-2 - Package Contrast Dose Management Outbound PACS interface 1 0009 MISP3TA - Package Certegra Patient Weight Dosing Software - Abdomen Application 1 0010 MISP3TPA - Package Certegra Patient Weight Dosing Software - Pulmonary Angiography Application 1 0011 MIS SVS INT-1D Contrast Dose Management interface implementation fee 1 0012 FLEXD-200-SPK 2-200 ml FLEX syringes, 60"" patient Tubing with T-connector, 2 sterile spikes / 20 per box 1 The Government and the Contractor understand and agree that the services to be delivered under this contract by the Contractor to the Government are non-personal services and the parties recognize and agree that no employer-employee or master-servant relationships exist or will exist under the contract between the Government and the Contractor s employees. POINT OF CONTACT (POC): The identified POC and technical representative for this acquisition is: Name: Kelley Burkhouse Phone Number: 412-360-6541 Email: Kelley.burkhouse@va.gov ""No Government personnel, other than the Contracting Officer, have the authority to change or alter these requirements. The COR shall clarify technical points or supply relevant technical information, but no requirements in this scope of work may be altered as a sole result of such verbal clarification."" REPORTS/DELIVERABLES: Delivery confirmation of equipment and commodities will be made through the Logistics Department of the VAMC Pittsburgh (646). This will include documentation of receipt and assignment of a facility based EE number for identification and tracking purposes. Delivery confirmation of non-equipment/ commodities acquisitions is the responsibility of the receiving Facility and/ or Service. REQUEST FOR INFORMATION INSTRUCTIONS: The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications mentioned above. Responses to this RFI should include company name, address, point of contact, phone number, and point of contact e-mail, DUNS Number, Cage Code, size of business pursuant to North American Industrial Classification System (NAICS) 334510 (size standard of 1250 employees). Please answer the following questions: Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? Is your company considered small under the NAICS code identified under this RFI? Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? If not, can you provide additional information shown below. This is to confirm compliance with the non-manufacturer rule IAW 13 CFR 121.406(b) Nonmanufacturers. Does your company exceed 500 employees; Primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied; Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice; Obtained an individual or class waiver? If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? If you intend to subcontract any work on this contract, what portion of the total cost will be self-performed/will be performed by your organization? Please provide estimated detailed percentage breakdowns related to subcontracted work and completion of job. Does your company have an FSS contract with GSA or the NAC or are you a contract holder with any other federal contract? If so, please provide the contract number. If you are an FSS GSA/NAC contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. Please submit your capabilities in regard to the salient characteristics detailed above and any information pertaining to equal to items to establish capabilities for planning purposes? Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. Please provide your DUNS number. This RFI will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 13. Telephone responses will not be accepted. Responses must be received via e-mail to allan.tabliago@va.gov no later than, 16:30 PM Eastern Standard Time (EST) on February 11, 2022. This notice will help the VA in determining available potential sources only. Do not contact VA Medical Center staff regarding this requirement, as they are not authorized to discuss this matter related to this procurement action. All questions will be addressed by the Contracting Specialist, Allan Tabliago. Questions or responses will include the Source Sought number in the subject line. All firms responding to this Request for Information are advised that their response is not a request for proposal, therefore will not be considered for a contract award. Any interested business concern must submit a no longer that 10-page capability statement addressing its ability to meet the requirements listed above to Capability Statement shall include a statement regarding how the business concern is engaged in wholesale trade and normally sells the item being supplied and how the business concern will take ownership of the items being delivered. Vendors shall also provide certification, evidence that they are an authorized distributor of the Original Equipment Manufacturer. If a solicitation is issued, information will be posted on the SAM web site for all qualified interested parties at a later date and interested parties must respond to the solicitation to be considered for award. This notice does not commit the government to contract for any supplies or services. The government will not pay for any information or administrative cost incurred in response to this Request for Information. Information will only be accepted in writing by e-mail to Contracting Officer at allan.tabliago@va.gov. DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/1a8a622ec5cf46c4964d39ac2d59b6e9/view)
 

Place of Performance

Address: Department of Veterans Affairs Pittsburgh VAMC-University Drive University Drive C, Pittsburgh 15240-1003, USA

Zip Code: 15240-1003

Country: USA
 

Record

SN06234220-F 20220207/220205230107 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |