SOLICITATION NOTICE
43 -- MT - CF POWER PLANT OIL FILTRATION
- Notice Date
- 3/9/2022 3:19:31 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- GREAT PLAINS REGIONAL OFFICE BILLINGS MT 59101 USA
- ZIP Code
- 59101
- Solicitation Number
- 140R6022Q0016
- Response Due
- 3/24/2022 4:00:00 PM
- Archive Date
- 04/08/2022
- Point of Contact
- Whetham, Audrey, Phone: 307-261-5619, Fax: 307-261-5683
- E-Mail Address
-
AWhetham@usbr.gov
(AWhetham@usbr.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, quotes are being requested and a written solicitation will not be issued. Solicitation number 140R6022Q0016 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-05. This is a total small business set-aside under NAICS 333999 with an associated small business size standard of 500 employees. The required supplies must meet the following parameters as outlined in this combined synopsis/solicitation to be considered technically acceptable. Line Item 0010 - 10 GPM Kidney-Loop Filter Skid (Dual Spin-On) a. Part number FS-10-S514D/2-120-N4-V OR EQUAL to, having the following salient characters i. Compatible with the following oils (minimum) 1. ISO VG68 ii. Filter Heads 1. Quantity: 2 2. Material: Cast aluminum 3. Spin-on 4. No internal bypass 5. Series Plumbing 6. Filters (Each head) a. Accepts (1) high efficiency spin-on filter element rated beta > 2000 per ISO 16889 b. 0-25 PSID differential pressure indicators (0-20 PSID green / 20-25 PSID red). Visual differential indicators for when the filter elements are plugged and need to be changed. iii. Motor: 1. Electric 2. Totally Enclosed Forced Cooling (TEFC) iv. Gear Pump 1. 10 gallon per minute positive displacement 2. Direct coupled to electric motor 3. Adjustable relief valve a. Factory set at 100 PSI. v. Seal Material: Viton vi. Inlet/Outlet 1. Camlock connections 2. 1-inch 3. Isolations valves for each 4. 20-mesh Y-strainer on inlet for pump protection. vii. Electrical: 1. Requirement: 120V / 1 Ph / 60 Hz. 2. On/Off Switch 3. Rating: NEMA 4 4. Power Cord Length (minimum): 25-feet viii. Sample Ports 1. 1 upstream 2. 1 downstream ix. Skid Base 1. Carbon Steel 2. Spill Containment Lip x. Transfer Hoses 1. Quantity: 2 2. 1-inch diameter 3. Camlock connections 4. Length: 12-feet xi. Exterior Finish: Oil and corrosion resistant enamel paint Warranty: 1-year factory warranty is required on all products. Line Item 0020 - 20 GPM Vacuum Dehydration Oil Purification System a. Part number VDOPS-20VFD-840X-36KW-480-N4-V OR EQUAL to, having the following salient characteristics i. Compatible with the following oils (minimum) 1. Gear, including ISO VG68 2. Transformer 3. Lubrication 4. Turbine 5. Hydraulic ii. Operating Vacuum: 18-28"" Hg iii. Maximum Viscosity: 3000 SSU (600cSt) iv. Pre-Filter Assembly: Inlet strainer (20 mesh) for bulk particles v. Particulate Removal: 1 high efficiency 5 micron pleated micro glass filter element Beta >1000 per ISO 16889 vi. Water Removal: 100% free and emulsified, 90% dissolved - as low as 20 PPM vii. Gas Removal: 100% free and 90% dissolved viii. Maximum Rated Flow: 20 GPM (1200 GPH) ix. Outlet Pressure: 100 PSIG x. Inlet Pressure: 20"" Hg vacuum to +15 PSIG xi. Gauges: 1. 30"" Hg to 30 PSI inlet gauge 2. 0-100 PSI system pressure gauge 3. 0-50 PSID differential pressure gauge for positive indication when the filter element needs to be changed xii. Electrical Requirements: 480 volts, 3 phase, 60 Hz xiii. Control Panel: NEMA 4 enclosure with on-off switch, phase reversal switch, variable frequency drive, low flow indicator, high level in vacuum tower indicator, high condensate in sump indicator, and high differential pressure indicator (all with auto shut down), and hour meter xiv. Inlet Oil Heater: 36kW low watt density with digital temperature controller, two thermocouples (high limit and process) and shunt trip for redundant overheating protection xv. Vacuum Pump: 43 CFM dry-running claw style vacuum pump xvi. Condenser: Air cooled condenser xvii. Condensate Sump: 5-gallon carbon steel sump with manual water drain xviii. Inlet and Outlet Ports: 1-1/2"" JIC with isolation ball valves xix. Hoses: Quantity 2 heavy duty petroleum transfer hoses (1-1/2"" diameter x 20' length with JIC connectors) xx. Exterior Finish: Oil and corrosion resistant enamel paint xxi. Base: Carbon steel with spill containment lip with casters and forklift slots xxii. Seals Material: Viton xxiii. Dimensions: 62""L X 42""W X 78""H (+/- 2"") Warranty: 1-year factory warranty is required on all products. Line Item 0010 - 10 GPM Kidney-Loop Filter Skid (Dual Spin-On) 3 each at $__________ = $__________ Line Item 0020 - 20 GPM Vacuum Dehydration Oil Purification System 1 each at $__________ = $__________ Product Information must be included with the quote. Delivery Date shall be on or before May 15, 2022. Total price includes all applicable fees and taxes. FOB Destination (Helena, MT). CF Powerplant Bureau of Reclamation Canyon Ferry Powerplant 7700 Canyon Ferry Road Helena, MT 59602 In accordance with the procedures in FAR Part 12 and 13, RFQ 140R6022Q0016 is available for viewing through electronic commerce via Reclamations website at https://beta.sam.gov/ The Government will award a purchase order resulting from this solicitation to the responsible offeror whose offer is conforming to the solicitation and is the lowest price and technically acceptable. To be considered technically acceptable manufacturer specifications submitted must prove that it is equal to the Solicitation requirements and MUST be included with the quote. Quotes are due Thursday, March 24, 2022, by 4:00 p.m. Mountain Time. Contractors submit quotes by e-mail to awhetham@usbr.gov. NOTE: Effective August 1, 2012, any contractor to submit an acceptable quote or be awarded a government contract must be registered and active in System for Award Management (SAM). Contractors must register at www.sam.gov Note: Contractor's must submit their Tax Identification Number and Data Universal Number with their offer For further information about this requirement, offerors should contact Audrey Whetham at awhetham@usbr.gov. The provisions and clauses attached apply to this solicitation:
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/235345c9c10041d2b9c1d6ad742b1d9e/view)
- Record
- SN06262104-F 20220311/220309230105 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |