Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF APRIL 07, 2022 SAM #7433
SOLICITATION NOTICE

84 -- Cold Weather Gear, Level 6, GEN III

Notice Date
4/5/2022 1:43:24 PM
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
315210 — Cut and Sew Apparel Contractors
 
Contracting Office
FA4613 90 CONS PK FE WARREN AFB WY 82005-2860 USA
 
ZIP Code
82005-2860
 
Solicitation Number
FA461322Q1012
 
Response Due
4/19/2022 10:00:00 AM
 
Archive Date
05/04/2022
 
Point of Contact
Budd H. Butcher, Nathean Stoner
 
E-Mail Address
budd.butcher@us.af.mil, Nathean.stoner.1@us.af.mil
(budd.butcher@us.af.mil, Nathean.stoner.1@us.af.mil)
 
Small Business Set-Aside
SBA Total Small Business Set-Aside (FAR 19.5)
 
Description
Combined Synopsis/Solicitation Solicitation Number: FA461322Q1012 Purchase Description: Cold Weather Gear This is a Combined Synopsis/Solicitation Notice for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation/notice; responses/quotes are being requested, further written solicitation will not be issued. This solicitation will be posted to the SAM.gov web-site as a Total Small Business Set Aside. The 90th Contracting Squadron is issuing this combined synopsis/solicitation, FA461322Q1012, as a Request for Quote using FAR Part 12, Acquisition of Commercial Item, & FAR Part 13, Simplified Acquisition Procedures. The North American Industrial Classification System (NAICS) code for this procurement is 315210, with a small business size standard of 750 employees. The Government intends to award a Firm Fixed-Price Commercial Award. The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2022-04 effective 01/30/2022, Defense Federal Acquisition Regulation Supplement Change 03/18/2022 effective 03/18/2022 and Air Force Federal Acquisition Regulation Supplement AFAC 2021-0726 effective 10/27/2021. DESCRIPTION OF ITEMS/SERVICES: All CLINs F.O.B. Destination. Salient characteristics for the requested Jacket: Cold/Wet Weather Jacket is a waterproof layer for use in prolonged and/or hard rain and cold/wet conditions Jacket should feature a storable hood and pockets, be adjustable helmet compatible, technical hood with brim,� Jacket body must have waterproof full center front zipper, waterproof zippered right bicep pocket, waterproof zippered right- and left-hand pockets, Additionally waterproofed zippered left external chest pocket, waterproof 2-way side zippers, with hem snap tab closure, for ventilation and internal access Jacket must have glove compatible pulls on all zippers, self-fabric hook and loop wrist adjustments, Fabric should be 100%, Gore-Tex approved, waterproof seam sealed, adjustable draw cord cinch at front hem, with cord keepers, and elastic back hem. (Operational Camouflage Pattern (OCP)/Multi-Cam Pattern).� NIR compliant.� Stitches type must be in-accordance with ASTM D6193. Salient characteristics for the requested Trousers: Cold/Wet Weather Trouser is a waterproof layer for use in prolonged and/or hard rain and cold/wet conditions Pants should have suspenders that can be used with trousers if desired. Cold/Wet Weather Trousers must feature side zips on the lower legs to provide access when donning and doffing boots Pants require an elastic internal belt at waist with low-profile G-hook buckle, snap closure, and zippered fly, internal 4-point suspender loops Pants should have a � non-separating waterproof, 2-way side seam zippers with snap tab closer on lower legs for ventilation and internal access Also required are glove compatible pulls on all zippers, 100%, Gore-Tex approved, waterproof seam sealed (Operational Camouflage Pattern (OCP) Pattern).� NIR compliant.� Stitch type in-accordance with ASTM D6193. Contractor to provide product specification documentation clearly showing the above requirements are met along with product photos for review. The Contractor shall provide the following: THIS IS A BRAND NAME OR EQUAL REQUIREMENT TO THE NSNs LISTED BELOW: CLIN 0001:�� LEVEL 6 OCP JACKET GENIII size S/R� (NSN 8415-01-641-0806) Quantity: 100 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0002:�� LEVEL 6 OCP JACKET GENIII size M/R �(NSN 8415-01-641-0818) Quantity: 145 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0003:�� LEVEL 6 OCP JACKET GENIII size M/L �(NSN 8415-01-641-0823) Quantity: 60 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0004:�� LEVEL 6 OCP JACKET GENIII size L/R �(NSN 8415-01-641-0824) Quantity: 125 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0005:�� LEVEL 6 OCP TROUSERS GENIII size S/R �(NSN 8415-01-641-1793) Quantity: 105 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0006:�� LEVEL 6 OCP TROUSERS GENIII size M/R �(NSN 8415-01-641-1799) Quantity: 145 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0007:�� LEVEL 6 OCP TROUSERS GENIII size M/L �(NSN 8415-01-641-1800) Quantity: 60 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0008:�� LEVEL 6 OCP TROUSERS GENIII size L/R �(NSN 8415-01-641-1801) Quantity: 125 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0009:�� LEVEL 6 OCP JACKET GENIII size XS/R �(NSN 8415-01-641-0785) Quantity: 5 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0010:�� LEVEL 6 OCP JACKET GENIII size L/L �(NSN 8415-01-641-0806) Quantity: 25 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0011:�� LEVEL 6 OCP JACKET GENIII size XL/R �(NSN 8415-01-641-0829) Quantity: 30 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ CLIN 0012:�� LEVEL 6 OCP TROUSERS GENIII size XL/R �(NSN 8415-01-641-0829) Quantity: 30 Unit of Issue: EA Unit Price: $_____________ Extended Price (Quantity X Unit Price): $________________ DELIVERY DATE(S): Estimated Delivery 60 Days After Date of Order/Contract PLACE OF DELIVERY: F.E. Warren AFB, WY ALL RFQ Questions must be emailed to budd.butcher@us.af.mil and nathean.stoner.1@us.af.mil and received no later than 11:00 AM MT on Tuesday, 12 April 2022. Responses/quotes MUST be received no later than Tuesday, 19 April, 2022; 11:00 AM (Mountain Time). �Forward responses by e-mail to budd.butcher@us.af.mil and�nathean.stoner.1@us.af.mil. Per FAR Subpart 4.1102, offerors are required to be registered in System for Award Management (SAM) at the time an offer is submitted. Failure to do so will result in the offer being deemed ineligible for award. APPLICABLE FAR CLAUSES: All applicable Provision/Clauses can be found in the attached document.� The following are instructions and evaluation factors pulled from the Provision/Clauses document specific to this combined synopsis solicitation for easier viewing for the vendor. FAR 52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS FAR 52.212-1 is hereby tailored as follows: �(1) Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1. (2) After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate. (3)� The term �offeror� or �offer� as used in FAR 52.212-1 shall be understood to mean �quoter� and �quote,� respectively.� Further, the term �award� shall be understood to describe the Government�s issuance of an order. (4)� The Government will consider all quotes that are timely received and may consider late quotes.� Failure of a quote to address any items required in the submission package may make a quote unacceptable. (5)� Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows: (n) In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission: (1)� Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price. (2)� Total Firm Fixed price (3)� Any Discount Terms (4)� Estimated time of delivery (5)� Technical Submission Requirements (i.) For Parts/Supply buy, the quote shall contain a description including part number and title for each item listed in the solicitation to allow the Government to verify that the quoted parts match the requirements listed in the requirements schedule.� A photo is required of each like item a long with the information requested in 1-7 of this section. (6) Cage Code ������ (7) Company Name, Physical Address, Point of Contact, phone number and email address. FAR 52.212-2 Evaluation -- Commercial Items (Oct 2014) FAR 52.212-2 is hereby tailored as follows: (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered.� The following factors shall be used to evaluate offers: (i) Technical capability of the item offered: meets brand name or equal to the Government requirement/specifications as identified above. (ii) Price: Award will be made to the lowest priced technically acceptable.� No additional information from the offeror will be required if the price is based on adequate price competition.� In the event adequate price competition does not exist, the contracting officer will obtain information from the offeror to the extent required to determine the reasonableness of the offered prices. (iii) The Government will evaluate quotes in accordance with the following evaluation criteria. The Government will evaluate quotes for acceptability, but will not rank the quotes by the non-price factors. If the Government receives fewer than three (3) initial quotes, all quotes will be evaluated for Technical Acceptability. If the Government receives more than three (3) initial quotes, the Government will only select the three (3) lowest priced quotes and then evaluate them for Technical Acceptability. The Government reserves the right to evaluate additional quotes for technical acceptability if it is the Government�s best interest to do so. (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party.� Before the offer�s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) 52.211-6�Brand Name or Equal. As prescribed in�11.107(a), insert the following provision: Brand Name or Equal�(Aug 1999) ������(a)�If an item in this solicitation is identified as ""brand name or equal,"" the purchase description reflects the characteristics and level of quality that will satisfy the Government�s needs. The salient physical, functional, or performance characteristics that ""equal"" products must meet are specified in the solicitation. ������(b)�To be considered for award, offers of ""equal"" products, including ""equal"" products of the brand name manufacturer, must- �����������(1)�Meet the salient physical, functional, or performance characteristic specified in this solicitation; �����������(2)�Clearly identify the item by- ����������������(i)�Brand name, if any; and ����������������(ii)�Make or model number; �����������(3)�Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and �����������(4)�Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. ������(c)�The Contracting Officer will evaluate ""equal"" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. ������(d)�Unless the offeror clearly indicates in its offer that the product being offered is an ""equal"" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) Attachments: Attachment 1- Additional Applicable Provisions and Clauses
 
Web Link
SAM.gov Permalink
(https://sam.gov/opp/8dfd134aff04428194d5d551b58bae56/view)
 
Place of Performance
Address: FE Warren AFB, WY 82005, USA
Zip Code: 82005
Country: USA
 
Record
SN06289994-F 20220407/220405230059 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.