SOURCES SOUGHT
30 -- PROJECT CL21214001
- Notice Date
- 4/6/2022 7:18:03 AM
- Notice Type
- Sources Sought
- NAICS
- 333612
— Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- 1000127061
- Response Due
- 4/12/2022 10:00:00 AM
- Point of Contact
- Mindy Cook, Phone: 6146921798
- E-Mail Address
-
mindy.cook@dla.mil
(mindy.cook@dla.mil)
- Description
- CLIN 0001: 3010-00-410-3236 DISK, CLUTCH, NONVEHICULAR Approved Source(s) � TRIUMPH GEAR SYSTEMS, INC. (82402) P/N: 42093-137 CLIN 0002: 3020-01-099-7932 GEARS, SPUR Approved Source(s) � TRIUMPH GEAR SYSTEMS, INC. (82402) P/N: 42292D64 CLIN 0003: 3040-00-006-5231 GEARSHAFT, SPUR Approved Source(s) � TRIUMPH GEAR SYSTEMS, INC. (82402) P/N: 42252E28 CLIN 0004: 5330-01-551-7113 GASKET Approved Source(s) ������ � LOCKHEED MARTIN CORPORATION (98897) P/N: 4G94041-121A � TRIUMPH GEAR SYSTEMS, INC. (82402) P/N: 42357-170 The AMC/AMSC for CLIN 0001 is: 3 / C �AMC 3.� Acquire, for the second or subsequent time, directly from the actual manufacturer �AMSC C.� This part requires engineering source approval by the design control activity in order to maintain the quality of the part.� Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s).� The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part.� An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity.� The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.� If one source is approved,�AMCs�3, 4, or 5 are valid.� If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures,�AMCs�1 or 2 are valid. The AMC/AMSC for CLIN 0002 is: 3 / R �AMC 3.� Acquire, for the second or subsequent time, directly from the actual manufacturer AMSC R.� The Government does not own the data or the rights to the data needed to purchase this part from additional sources.� It has been determined to be uneconomical to buy the data or rights to the data.� It is uneconomical to reverse engineer the part.� This code is used when the Government did not initially purchase the data and/or rights.� If only one source has the rights or data to manufacture this item,�AMCs�3, 4, or 5 are valid.� If two or more sources have the rights or data to manufacture this item,�AMCs�1 or 2 are valid. The AMC/AMSC for CLIN 0003 and CLIN 0004 is: 3 / D �AMC 3.� Acquire, for the second or subsequent time, directly from the actual manufacturer AMSC D.��The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation.� AMCS 3, 4, or 5 are valid. Primary Point of Contact: Mindy M Cook, Contract Specialist Please review the NSNs listed above and provide any sources that may be able to manufacture these items. The approved sources for this NSN are currently listed above. All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above. Should a company wish to be reviewed and qualified as an �Approved Source�, they must submit an application package through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can completely manufacture the item to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring. For further information, please reference the DLA Land and Maritime webpage shown below for detailed explanation for the information and format necessary for a SAR and for the SAR approval process.�� http://www.dla.mil/LandandMaritime/Business/Selling/Alternate-Offers/ See DIBBS DLAD PROC NOTE L04 Offers for Part Numbered Items and M06 Evaluation of Offers for Part Numbered Items. This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to be obtain information regarding the capability and availability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. Sources interested in providing an offer on the solicitation, should complete the attached market survey and return the completed copy to Mindy Cook via email at mindy.cook@dla.mil.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ac0519a54d054e8e8c528de721500062/view)
- Record
- SN06291525-F 20220408/220406230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |