SPECIAL NOTICE
Y -- B-21 Weapons Generation Facility (WGF-F) Ellsworth AFB
- Notice Date
- 4/7/2022 8:48:45 AM
- Notice Type
- Special Notice
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- W071 ENDIST OMAHA OMAHA NE 68102-4901 USA
- ZIP Code
- 68102-4901
- Solicitation Number
- W9128F22SM034PLA
- Response Due
- 4/21/2022 12:00:00 PM
- Point of Contact
- Shawn Adkins, Jeff W. Wyant
- E-Mail Address
-
shawn.a.adkins@usace.army.mil, jeffrey.w.wyant@usace.army.mil
(shawn.a.adkins@usace.army.mil, jeffrey.w.wyant@usace.army.mil)
- Description
- The Corps of Engineers Omaha District is soliciting comments from the construction community addressing the potential use of Project Labor Agreements (PLA) for large scale construction projects (exceeding $25 million) within the Ellsworth AFB, South Dakota area. Provide your responses NLT 2PM, Central Standard Time, 21 April 2022 to shawn.a.adkins@usace.army.mil. Ensure your response is limited to 5 pages and the Subject Line of your response includes �PLA Survey � WGF-F Facility Ellsworth AFB, SD�. Please provide your contact information in the body of the email. A PLA is defined as a pre-hire collective bargaining agreement between a Prime contractor and one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S. C. 158(f). Federal Acquisition Regulation (FAR 22.503) Policy provides that: (a) Project Labor Agreement (PLA) is a tool that agencies may use to promote economy and efficiency in Federal procurement. Pursuant to Executive Order 13502, agencies are encouraged to consider requiring the use of project labor agreements in connection with large-scale construction projects. (b) An agency may, if appropriate, require that every contractor and subcontractor, or certain subcontractors, engaged in construction on the project agree, for that project, to negotiate or become a party to a project labor agreement with one or more labor organizations if the agency decides that the use of project labor agreements will (i) Advance the Federal Governments interest in achieving economy and efficiency in Federal procurement, producing labor-management stability, and ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards and other matters; and (ii) Be consistent with law. Reference: FAR 52.222-33 Notice of Requirement for Project Labor Agreement; FAR 52.222-34 Project Labor Agreement. Request responses to the following questions: (1) Do you have knowledge that a PLA has been used in the local area on projects of this kind? If so, please provide supporting documentation. (2) Are you aware of skilled labor shortages in the area for those crafts that will be needed to complete the reference project? If so, please elaborate and provide supporting documentation where possible. (3) Are you aware of time sensitive issues/scheduling requirements that would affect the rate at which the referenced project should be completed? If so, please elaborate and provide supporting documentation where possible. (4) Identify specific reasons why or how you believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in federal procurement. (5) Identify specific reasons why you do not believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in federal procurement. (6) Identify any additional information you believe should be considered on the use of a PLA on the referenced project. (7) Identify any additional information you believe should be considered on the non-use of a PLA on the referenced project. The information gathered in this survey should include the following information on projects completed in the last 2 � 5 years: Project Name and Location Detailed Project Description Initial Cost Estimate vs. Actual Final Cost Was the project completed on time? Number of craft trades present on the project Was a PLA used? Were there any challenges experienced during the project? Project Description: This is a Fully Designed Project.� Construct a 52,210 Square Feet Special Weapon Maintenance Shop or more commonly referred to as a Weapons Generation Facility (WGF) that is a consolidated, hardened facility within a protective zone, with consolidated storage, maintenance, inspection, and administrative functions using best practices from similar Department of the Navy and Department of Energy facilities currently in use. Project will construct a fire suppression system, all utilities, pavements, communication, site improvements, Security Forces Fire Team Facility (F2F), Entry Control Point (ECP)/Shelter and associated support facilities to provide a complete and useable facility.� Overhead bridge cranes will be constructed for maintenance purposes in each maintenance bay. All construction will meet requirements for essential facility system nuclear design certification. The estimated construction cost of this project is between $200,000,000 and $275,000,000. The estimated period of performance is 1,460 calendar days. Contractors responding to this market survey must submit their responses via e-mail to Shawn Adkins at shawn.a.adkins@usace.army.mil no later than 2:00 PM (CST), Monday, 21 April 2022.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/84758500501f4651a4a9e25f56822ed9/view)
- Place of Performance
- Address: Ellsworth AFB, SD, USA
- Country: USA
- Country: USA
- Record
- SN06291990-F 20220409/220407230058 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |