SAMDaily.us | PRESOL | 80 | NON-SKID

SAMDAILY.US - ISSUE OF APRIL 15, 2022 SAM #7441
SOLICITATION NOTICE

80 -- NON-SKID

Notice Date: 4/13/2022 4:08:08 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 325510 — Paint and Coating Manufacturing
Contracting Office: DLA MARITIME - NORFOLK PORTSMOUTH VA 23709-5000 USA
ZIP Code: 23709-5000
Solicitation Number: SPMYM122Q0108
Response Due: 4/20/2022 3:00:00 AM
Archive Date: 05/05/2022
Point of Contact: Craig Harmon, Phone: 7572785055
E-Mail Address: craig.harmon@dla.mil
(craig.harmon@dla.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 325510 Paint and Coating, Dopes, Varnishes, & related products. This requirement is posted as a brand name solicitation which requires products manufactured by ITW AMERICAN SAFETY TECHNOLOGIES INC.� This requirement will be set aside as a 100% Small Business concern. The Contract Line Items (CLINs) are as follows. 0001 90 Kit N421582088C309 FFP COATING COMPOUND, NON-SKID, DARK DECK GRAY, MS-660G FLEXIBLE NON SKID (1 KIT= 5 GALLON) Part Number MS600K FOR OVERSEAS USE; PRODUCT MUST HAVE A SHELF LIFE EXTENDING THROUGH 05/15/2023 TO SUPPORT CURRENT SHIP SCHEDULE DOCUMENT#: 2088-C309 QTY: 90 UI: KT QA: 4 NSN: 9B 8010-HM-CN0-3719 ITEM: NON SKID COATING KIT a) All material for this line item must be marked and identified clearly on each individual container and LABEL IAW CFR29.1910.1200. b) Date manufactured shall be marked and identified clearly on each individual unit�s label, regardless of its inclusion in batch numbers. c) Shelf life expiration date shall be clearly marked on each individual unit, must have 85% of shelf life remaining upon receipt. d) The manufacturer: ITW ENGINEERED POLYMERS and product: Lightweight non-slip, ANTI-SLIP COATING KIT, AMERICAN SAFETY TECHNOLOGIES, MS-660G UV/LSA DARK GRAY, (PART A), 4 GL and (PART B), 1 GL, EQUAL TO 5 GALLON KIT, Attached JML has been approved for use at Norfolk Naval Shipyard. The above MANUFACTURER and PRODUCT approved AUL# is: 9B 8010-HM-CN0-3719 SHELF LIFE: H-UU e) If another MANUFACTURER and PRODUCT is offered: The buyer must request a copy of the material safety data sheet and forward to Code-NMBB, designate an ""URGENT"" or ""ROUTINE"" priority and suspend award pending reply. MUST NOT CONTAIN METHYLENE CHLORIDE SAFETY DATA SHEET REQUIRED WITH MATERIAL DOCUMENT NO: 2088-C309 VOC Certificate of Conformance Properties of the Coating �As Supplied� by the Manufacturer/Supplier (Provide this document for EACH BATCH with EACH delivery of material) FROM: __________________________________________________________________ _____________ (Coating Supplier � Print) Local Supplier: __________________________________________________________________ ______ (Company Name � Print) __________________________________________________________________ ______ (Point of Contact � Print) (Phone number) Manufacturer: __________________________________________________________________ ______ (Company Name � Print) __________________________________________________________________ ______ (Point of Contact � Print) (Phone number) Coating Identification: __________________________________________________________________ _ (Name of coating as it appears on product container label � Print) Batch Number as it appears on product container label: _________________________________________ Contract / Requisition Number: ____________________________________________________________ VOC Content of This Batch: _________________ grams/liter In a letter dated January 7, 1998, the EPA Office of Enforcement and Compliance identified two acceptable SPMYM122Q0108 Page 5 of 64 methods for certifying the Batch VOC content of coatings subject to the requirements of the National Emissions Standard for Hazardous Air Pollutants (NESHAP) for Shipbuilding and Ship Repair (Surface Coating) Operations. In accordance with that guidance, the supplier of this coating is required to certify the VOC content of this batch of this coating, utilizing one of the allowable methods noted below. Check one below ____ The batch VOC content provided above is based on sound and consistent quality control procedures in batch formulation and manufacturing processes which prevent significant batch to batch variation in product VOC content. The formulation VOC value presented above has a consistent and quantitatively known relationship to the Method 24 result that would be obtained by testing a sample from any quality control approved production batch of this coating. Based on quality control procedures during and after the manufacturing processes used, the manufacturer/supplier certifies that any batch of this product, if tested by analytical test Method 24 of Appendix A of 40 CFR Part 60, will not exceed the VOC content as stated above when used in accordance with manufacturer instructions. ____ The batch VOC content provided above was determined by individually testing this batch of product using analytical test Method 24 of Appendix A of 40 CFR Part 60. Printed Name: __________________________________________________ (Authorized Supplier/Manufacturer Representative) Signature: _____________________________________________________ Date: _________________ (Authorized Supplier/Manufacturer Representative) FOB: Destination NSN: 8010-HM-CN0-3719 MILSTRIP: N421582088C309 PURCHASE REQUEST NUMBER: N421582088C309 PROJECT: 5B3 PSC CD: 8010 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT PRICE AMOUNT 0002 125 Kit N421582088C310 FFP EPOXY MEMBRANE MS-1600 LVFG, FLEXIBLE EPOXY MEMBRANE, 840 GREY, 5 GALLON KIT Part Number MS117K FOR OVERSEAS USE; PRODUCT MUST HAVE A SHELF LIFE EXTENDING THROUGH 05/15/2023 TO SUPPORT CURRENT SHIP SCHEDULE DOCUMENT NO: 2088-C310 QTY: 125 UI: KT QA: 4 NSN: 9B 8030-LL-N03-9653 ITEM: ANTI-SLIP COATING KIT a) All material for this line item must be marked and identified clearly on each individual container and LABEL IAW CFR29.1910.1200. b) Date manufactured shall be marked and identified clearly on each individual unit�s label, regardless of its inclusion in batch numbers. c) Shelf life expiration date shall be clearly marked on each individual unit and must have 85% of shelf life remaining at time of receipt. d) The manufacturer: ITW AMERICAN SAFETY TECHNOLOGIES INC. and product: MIL-PRF-24667C, AMERICAN SAFETY TECHNOLOGIES MS-1600 LV FC, DK GRAY - PART A, 4.0 GALLONS, P/N MS-116R/DRK GRAY and PART B, 1.0 GALLON, P/N: MS192H/MS116R DRK GREY, ANTI-SLIP COATING KIT, KIT P/N: MS117K, 5 GALLON KIT, on attached JML has been approved for use at Norfolk Naval Shipyard. The above manufacturer and product approved AUL#'(s) are; 9B 8030-LL-N03-9653 SHELF LIFE: 4-C0 e) If another MANUFACTURER and PRODUCT is offered: The buyer must request a copy of the material safety data sheet and forward to ORIGINATOR, designate an ""URGENT"" or ""ROUTINE"" priority and suspend award pending reply. REQUISITION#: 2088-C310 MIL SPEC ORDERING DATA: a) COATING SYSTEM, NON-SKID, FOR ROLL OR SPRAY OR SELFADHERING APPLICATION MIL-PRF-24667C 22 MAY 2008 b) TYPE IV, COMP. E, 5 GALLON KIT c) MIL-PRF-24667C d) 840 GRAY, MS-1600 e) N/A f) N/A g) SDS PROVIDED 2 MUST NOT CONTAIN METHYLENE CHLORIDE SAFETY DATA SHEET REQUIRED WITH MATERIAL FOB: Destination NSN: 8030-LL-N03-9653 MILSTRIP: N421582088C310 PURCHASE REQUEST NUMBER: N421582088C309 PROJECT: 5B3 PSC CD: 8030 NET AMT 0003 30 Kit N421582088C311 FFP EPOXY PRIMER PRIMER, NON-SKID, DARK GRAY, (4 GALLON= 1 KIT) Part Number MS702K DOCUMENT #: 2088-C311 QTY: 30 UI: KT QA: 4 NSN: 9B 8010-01-550-6848 ITEM: EPOXY PRIMER KIT a)All material for this line item must be marked and identified clearly on each individual container and LABEL IAW CFR29.1910.1200. b)Date manufactured shall be marked and identified clearly on each individual unit�s label, regardless of its inclusion in batch numbers. c)Shelf life expiration date shall be clearly marked on each individual unit, must have 85% of shelf life remaining upon receipt. d)The manufacturer: ITW POLYMERS COATING NORTH AMERICA ANDITW ENGINEERED POLYMERS and product: AMERICAN SAFETYTECHNOLOGIES MS-7CZ, GRAY (PART A), P/N: MS703R, 3 GL, ANDHARDENER, (PART B), P/N: MS790H, 1 GL, EQUALS 4 GALLON KIT On attached JML has been approved for use at Norfolk Naval Shipyard. The Above manufacturer and product approved AUL# is: 9B 8010-01-550-6848 SHELF LIFE: H-UU e)If another MANUFACTURER and PRODUCT is offered: The buyer must request a copy of the material safety data sheet and forward to ORIGINATOR designate an ""URGENT/ROUTINE"" priority and suspend award pending reply. __________________________________________________________________ __________EQUIPMENT SPECIALIST DATE REVIEWER DOCUMENT#: 2088-C311 VOC Certificate of Conformance Properties of the Coating �As Supplied� by the Manufacturer/Supplier (Provide this document for EACH BATCH with EACH delivery of material) FROM: __________________________________________________________________ _____________ (Coating Supplier � Print) Local Supplier: __________________________________________________________________ ______ (Company Name � Print) __________________________________________________________________ ______ (Point of Contact � Print) (Phone number) Manufacturer: __________________________________________________________________ ______ (Company Name � Print) __________________________________________________________________ ______ (Point of Contact � Print) (Phone number) Coating Identification: __________________________________________________________________ _ (Name of coating as it appears on product container label � Print) Batch Number as it appears on product container label: _________________________________________ Contract / Requisition Number: ____________________________________________________________ VOC Content of This Batch: _________________ grams/liter In a letter dated January 7, 1998, the EPA Office of Enforcement and Compliance identified two acceptable methods for certifying the Batch VOC content of coatings subject to the requirements of the National Emissions Standard for Hazardous Air Pollutants (NESHAP) for Shipbuilding and Ship Repair (Surface Coating) Operations. In accordance with that guidance, the supplier of this coating is required to certify the VOC content of this batch of this coating, utilizing one of the allowable methods noted below. Check one below ____ The batch VOC content provided above is based on sound and consistent quality control procedures in batch formulation and manufacturing processes which prevent significant batch to batch variation in product VOC content. The formulation VOC value presented above has a consistent and quantitatively known relationship to the Method 24 result that would be obtained by testing a sample from any quality control approved production batch of this coating. Based on quality control procedures during and after the manufacturing processes used, the manufacturer/supplier certifies that any batch of this product, if tested by analytical test Method 24 of Appendix A of 40 CFR Part 60, will not exceed the VOC content as stated above when used in accordance with manufacturer instructions. ____ The batch VOC content provided above was determined by individually testing this batch of product using analytical test Method 24 of Appendix A of 40 CFR Part 60. Printed Name: __________________________________________________ (Authorized Supplier/Manufacturer Representative) Signature: _____________________________________________________ Date: _________________ (Authorized Supplier/Manufacturer Representative) MUST NOT CONTAIN METHYLENE CHLORIDE FOB: Destination NSN: 8010-01-550-6848 MILSTRIP: N421582088C311 PURCHASE REQUEST NUMBER: N421582088C309 PROJECT: 5B3 PSC CD: 8010 NET AMT INSPECTION This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM122Q0108 and it is expected to be posted on or about 13 April, 2022 and posted in SAM.gov, https://sam.gov/. Quotes will be due by 6:00 am EST on 20 April, 2022 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM122Q0108) is included in the subject line of any email correspondence.� Emails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://sam.gov/ . By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/954be2bff17f44bf91824e9ba4766ff0/view)
Place of Performance: Address: Portsmouth, VA 23709, USA; Zip Code: 23709; Country: USA
Record: SN06297562-F 20220415/220414232738 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

80 -- NON-SKID