SOURCES SOUGHT
10 -- NSN 1005-01-471-5456
- Notice Date
- 4/14/2022 12:56:38 PM
- Notice Type
- Sources Sought
- NAICS
- 332994
— Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- CL22066025
- Response Due
- 4/21/2022 8:59:00 PM
- Point of Contact
- Xiomara Seda-Vargas, Phone: 614-867-6691
- E-Mail Address
-
xiomara.sedavargas@dla.mil
(xiomara.sedavargas@dla.mil)
- Description
- Sources Sought Notice This is not a request for a proposal. This announcement is considered Market Research in accordance with FAR Part 10. NSN information is listed below.� If interested in this requirement, please complete the attached Market Survey and spreadsheet.� Please provide us with any sources that can manufacture the item.� All this information can be submitted to Xiomara Seda-Vargas at xiomara.sedavargas@dla.mil on or before 4/21/2022. NSN: 1005-01-471-5456 Annual Demand Quantity: 4,330 each PID, Packaging and marking BARREL,CARBINE RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. THIS ITEM IS A ""DEFENSE ARTICLE"" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. �DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. �ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. �FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD. _________________EXCEPTION DATA____________________ IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE COATING THEN MANGANESE IS REQUIRED. PACKAGING TDPL: DOCUMENT DELETE ADD PD 12991851 REV A REV B CANCELLED SPECIFICATION MIL-STD-120 SHALL BE USED FOR REFERENCE ONLY. ______________END OF EXCEPTIONS__________________ __________GOVERNMENT FURNISHED MATERIAL__________ 100% OF ALL BARRELLS SHALL UNDERGO DISPERSION AND TARGETING TEST. 10 ROUNDS MINIMUM OF M855A1 (1305-01-559-3333), 13 ROUNDS MAXIMUM. DODIC AB57. 1 EA M197 HPT IS REQUIRED PER BARREL. M197 HPT AMMO IS NOT AVAILABLE. CONTRACTOR IS REQUIRED TO USE COMMERCIAL EQUIVALENT AMMO PER DWG 12991850 NOTE 3. ______END OF GOVERNMENT FURNISHED MATERIAL________ ___ GOVERNMENT FURNISHED TEST SUPPORT EQUIPMENT____ 1 EA M4A1 CARBINE (NSN 1005-01-382-0953) TO TEST A MAXIMUM OF 8 BARRELS FOR TARGET AND ACCURACY TESTING SHALL BE PROVIDED TO THE CONTRACTOR BY THE PROCURING AGENCY. THE ACUTUAL NUMBER OF RIFLES REQUIRED FOR TESTING WILL BE BASED ON CONTRACT QUANTITY. THE ACTUAL SAMPLE SIZE FOR LOT TESTING WILL BE PER QAP VERIFICATION LEVEL AND MIL-STD-1916. __END OF GOVERNMENT FURNISHED TEST SUPPORT EQUIPMENT__ THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE REQUIREMENTS. CONTRACTOR FAT APPLIES. AFTER RECEIPT OF QUOTES, OFFERORS MAY BE CONTACTED TO PRICE THE FAT REQUIREMENT. PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT POST AWARD CONTRACTING OFFICER (PCO). PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA QAR AT THE ACTUAL MANUFACTURER'S FACILITY. THE IDENTIFICATION OF THE ACTUAL MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE APPROVED BY THE PCO VIA FORMAL CONTRACT MODIFICATION. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1) QUALIFICATION REQUIREMENTS IS APPLICABLE. THE AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR EVALUATION PRIOR TO CONTRACT AWARD. PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING TESTING. PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS CONTRACT. FIVE (5) PVT SAMPLES, UNLESS OTHERWISE SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT IN FOR TESTING. CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED. **************************************************************** RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES (CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3) RD002, COVERED DEFENSE INFORMATION APPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). �THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). �QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)"" APPLY. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING RT001: MEASURING AND TEST EQUIPMENT CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. A COLT INDUSTRIES LICENSE AGREEMENT 05 RESTRICTED TECHNICAL DATA PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION CONDITIONS APPLY. VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN THE ""05 COLT INDUSTRIES M4, M4A1, M16"" LICENSE AGREEMENT FOLDER AVAILABLE AT https://pcf1x.bsm.dla.mi./cFolders This item contains a phosphate coating requirement IAW MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V. �In lieu of the required submittal of a preproduction phosphate procedure the following is now required: �The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the NADCAP standard for the phosphate chemical processes. �Verification of this certification is required and must be supplied upon request of the Contracting Officer. This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. �DFARS 252.211-7003 clause applies. RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement) CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19200 12991851 REVISION NR K � DTD 03/28/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11837943 REVISION NR K � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C � DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12972681 REVISION NR D � DTD 12/14/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12991849 REVISION NR G � DTD 01/29/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19205 7266299 REVISION NR T � DTD 02/01/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19204 11837944 REVISION NR L � DTD 11/19/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448510 REVISION NR AJ �DTD 03/28/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19204 8448643 REVISION NR N � DTD 04/01/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9349056 REVISION NR L � DTD 10/04/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390002 REVISION NR D � DTD 04/27/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390003 REVISION NR E � DTD 08/13/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390004 REVISION NR G � DTD 08/13/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390005 REVISION NR D � DTD 08/13/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390006 REVISION NR J � DTD 08/13/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390009 REVISION NR T � DTD 09/08/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390030 REVISION NR H � DTD 04/03/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448503 REVISION NR U � DTD 09/04/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448551 REVISION NR G � DTD 11/08/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448553 REVISION NR J � DTD 05/24/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19204 8448574 REVISION NR H � DTD 11/18/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19204 8448575 REVISION NR K � DTD 08/13/2004 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-PRF-3420H NOT 1 REVISION NR 1 � DTD 11/07/2019 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-DTL-16232H(1) REVISION NR 1 � DTD 03/26/2021 PART PIECE NUMBER: IAW REFERENCE UNK DI-NDTI-80809B NOT 2 REVISION NR B � DTD 12/11/2019 PART PIECE NUMBER: IAW REFERENCE UNK QPL-3150-34 NOT 1 REVISION NR 34 �DTD 03/15/2007 PART PIECE NUMBER: IAW REFERENCE UNK QPL-16173-84 NOT 1 REVISION NR 84 �DTD 10/29/2008 PART PIECE NUMBER: IAW REFERENCE UNK QPL-63460-32 NOT 1 REVISION NR 32 �DTD 07/31/2008 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NAS1149 REVISION NR 7 � DTD 04/30/2019 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NAS1352 REVISION NR 13 �DTD 05/31/2016 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NASM16555 REVISION NR 3 � DTD 01/29/2016 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NASM16562 (R 2019) REVISION NR 2 � DTD 09/19/2014 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NASM51576 REVISION NR 2 � DTD 03/31/2016 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD SAE AS24585C REVISION NR C � DTD 07/01/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19204 8448573 REVISION NR L � DTD 11/08/2005 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13011863 REVISION NR E � DTD 07/19/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 L2S3025 REVISION NR E � DTD 04/15/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12993884 REVISION NR K � DTD 04/23/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12991850 REVISION NR T � DTD 03/28/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12991851 REVISION NR B � DTD 10/10/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12997968 REVISION NR D � DTD 09/08/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 1728 REVISION NR U � DTD 02/07/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12991851 REVISION NR � � DTD 10/01/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448551 REVISION NR G � DTD 11/08/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448553 REVISION NR J � DTD 05/24/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448573 REVISION NR L � DTD 11/08/2005 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448574 REVISION NR H � DTD 11/18/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448575 REVISION NR K � DTD 08/13/2004 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12972681 REVISION NR B � DTD 12/21/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9349056 REVISION NR L � DTD 10/04/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 L11S3031-SEVERAL REVISION NR � � DTD 04/14/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13041260 REVISION NR � � DTD 02/01/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19204 8448202 REVISION NR M � DTD 10/24/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13045512 REVISION NR � � DTD 12/17/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13045513 REVISION NR B � DTD 08/10/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047419 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047420 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047421 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047422 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047423 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047424 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047425 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047426 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047427 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047428 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047429 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047430 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047431 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047432 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047433 REVISION NR A � DTD 03/03/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047434 REVISION NR � � DTD 08/27/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13052445 REVISION NR � � DTD 11/19/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 MIL-DTL-71186 REVISION NR A � DTD 06/27/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390002 REVISION NR D � DTD 09/04/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13020533 REVISION NR N � DTD 08/24/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 13047429 REVISION NR � � DTD 12/19/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8448503 REVISION NR T � DTD 07/01/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9390030 REVISION NR H � DTD 02/24/2021 PART PIECE NUMBER: - �
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/1a869160e7c14da4b0355a9a4e830382/view)
- Record
- SN06298911-F 20220416/220414234152 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |