SAMDaily.us | PRESOL | 36 | 36--Lawn Equipment

SAMDAILY.US - ISSUE OF APRIL 23, 2022 SAM #7449
SOLICITATION NOTICE

36 -- 36--Lawn Equipment

Notice Date: 4/21/2022 4:42:28 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333112 — Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: 030822
Response Due: 4/26/2022 2:00:00 PM
Archive Date: 10/23/2022
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 030822 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-05. The associated North American Industrial Classification System (NAICS) code for this procurement is 333112 with a small business size standard of 1,500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-04-26 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Ft Hood, TX 76544 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Commercial Grade Back back Gas blowers with the following Specs Displacement: Min 79.9 Cc Max 85 Cc Engine Power : Min 3.2 Kw Max 5.2 Kw Fuel Capacity: Min 67.6 Fl. Oz. Max 70 Fl. Oz Blowing Force: Min 41 Newtons Avg. Max 45 Newtons Avg Air Velocity: min 89 M/Sec. (199 Mph) Max 107 M/Sec. (239 Mph), 1, EA; LI 002: Commercial Grade gas heavy-duty in tree chainsaw Displacement Min 35.2 cc Max 40cc Engine Power Min1.8 kW (2.41 bhp) Max 3.6 Kw (4.82 bph) Fuel Capacity Min 10.5 oz. Max 15 oz. able to support Min 10.5 oz guide bar and chain, includudes carrying case and scabbard, 2, EA; LI 003: Commercial Grade gas heavy-duty chainsaw Displacement Min 121.6 Cc (7.42 Cu. In.) Max 125. Cc Engine Power Min 6.4 Kw (8.6 Bhp) Max 12.8Kw (17.2 Bhp) Fuel Capacity Min 44.0 Oz. Max 45.0 Oz delivered with 2 x Guide Bars Length (20"" and 32"" guide bar) able to support 17"" to 59"" guide bar and chain, includes carrying case and scabbard, 2, EA; LI 004: Commercial Gas powered hand held Post Driver- 45-Lb. Driving Head, 1.3 HP Engine, 2, EA; LI 005: Commercial Grade grade Gas Powered clearing saws( Bush cutter) Displacement Min 3.48 cu. in. Max 4.6 cu. in. Engine Power Min 2.8 kW Max 4.8 kW Fuel Capacity Min 33.5 oz Max 43 oz. with the following Electronic ignition, Bike Handles, Double Standard Harness, including safety equipment ( protective Helmet System with integrated NRR 25 earmuffs and durable steel mesh full-face screen), 4, EA; LI 006: Commercial Grade Back back sprayer Displacement:63.3 cc (3.86 cu. in.), Engine Power : 2.9 kW (3.9 bhp), Fuel Capacity: 1700 cc (57.5 oz.), Air velocity, Newtons Avg. Air Velocity: Min 90 m/sec. Max 100 m/sec. Air Volume Min spray range: 48 ft Max 50 Ft, 2, EA; LI 007: gasoline-powered hedge trimmer ENGINE POWER 0.94 bhp FUEL CAPACITY 15.6 oz. DISPLACEMENT1.4 cu. in. BLADE LENGTH 30 in. STROKES PER MINUTE 3,100, 3, EA; LI 008: Commercial Grade grade Gas Powered Trimmer not Brush cutters Displacement Min 3.48 cu. in. Max 4.6 cu. in. Engine Power Min 2.8 kW Max 4.8 kW Fuel Capacity Min 33.5 oz Max 43 oz. with the following Electronic ignition, Bike Handles, Double Standard Harness, including safty equipment ( protective Helmet System with integrated NRR 25 earmuffs and durable steel mesh full-face screen), 7, EA; LI 009: Commercial Grade Battery-Powered Electric Motor Multi-Task Tool similar to the KMA 130 R battery-powered Kombi Motor with AP 300 S Lithium-Ion Battery and charger SPEED SETTINGS: Level 1: 6,200 RPM, Level 2: 7,700 RPM, Level 3: 8,500 RPM, 5, EA; LI 010: blower attachment must be compatible with CLN 09, 5, EA; LI 011: Bed Redefiner attachment must e compatible with CLN 09, 5, EA; LI 012: lawn edger attachment must be compatible with CLN 09, 5, EA; LI 013: Adjustable power scythe attachment must be compatible with CLN 09, 5, EA; LI 014: brush cutter attachment must be compatible with CLN 09, 5, EA; LI 015: Line Head Trimmer attachment must be compatible with CLN 09, 5, EA; LI 016: pole pruner attachment must be compatible with CLN 09, 5, EA; LI 017: shaft extension attachment must be compatible with CLN 09, 5, EA; LI 018: Hedge Trimmer attachment must be compatible with CLN 09, 5, EA; LI 019: bristle brush attachment must be compatible with CLN 09, 5, EA; LI 020: Power Sweep attachment must be compatible with CLN 09, 5, EA; LI 021: Mini-Cultivator attachment must be compatible with CLN 09, 5, EA; LI 022: Backpack battery rated at 36 Volts attachment must be compatible with CLN 09, 5, EA; LI 023: 0.095"" Weed Wacker Eater String, Commercial Grade Round Nylon String Trimmer Line Replacement for String Trimmer Weed Trimmer .095""-1280ft-5lb-Spool, 10, EA; LI 024: Premix Engine Fuel (2 Cycle 50:1), 55, Gal Drum; LI 025: Fuel Transfer Pump compatible with 55 Gal Drum of fuel 12' dispensing hose. Aluminum die cast, explosion-proof motor. 15' cable must connect to standard 12-volt battery Pad lockable Fits 15 to 55 Gal REACH BELOW 32"" DRUM LID FITS NECK SIZE 2"", 1, EA; LI 026: Drum Trucks to move and dispense a heavy drum with ease. 4-wheel drum hand trucks., 1, EA; LI 027: Commercial Pro Concentrate Systemic Herbicide, 25, Gals; LI 028: MOAB enclosed 7.5"" x 16"" Tandem 5200# Axles trailer similar to the ones that LOOK and Pace America make with the following characteristics Service Panel Power Converter Exterior Motor base Plug DOT Battery Box 12V DR LED Loading Light Recessed Winch Compartment with witch Recessed Wall and floor E-Track E-Track Straps Hingeless Ramp Extension Top Wind Jack Ultimate Escape Door Double Side Doors Bogie Wheels Extended A-Frame Raised Coin Generator Compartment Interior lift 024 Aluminum Interior Walls Insulated Ceiling Foil Ray Insulation LT235/80R16 Wheels 2-5/16"" Adjustable Coupler Stabilizer Jacks Ramp Door w/Large Black J-Trim Sprint Roof 5000# Drop Leg Jack w/Sand Pad Black ATP Fenders and V-Nose Slanted V-Nose, 1, EA; LI 029: Mucinex Dual Pressure Washer rotary cleaner and wand or similar with the following minimal specs Hose Length: 32ft 9in Adjustable: Pressure range 4000psi � 1000psi Fuel tank capacity 1 gallon or better Pump Heavy duty with gear reduction thermal release valve pressure gauge & external bypass Rotary size 24in or better, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/12272dcdf3e34fd7ad8fe4ea1c06b64f/view)
Place of Performance: Address: Bldg 37014 Tokyo Drive , Ft Hood, TX 76544, USA; Zip Code: 76544; Country: USA
Record: SN06304408-F 20220423/220421230114 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

36 -- 36--Lawn Equipment