SOLICITATION NOTICE
65 -- Copy of NX 586-22-2-047-0066 SIM Ultrasound PM&RS (VA-22-00053216)
- Notice Date
- 4/27/2022 11:58:54 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334517
— Irradiation Apparatus Manufacturing
- Contracting Office
- 256-NETWORK CONTRACT OFFICE 16 (36C256) RIDGELAND MS 39157 USA
- ZIP Code
- 39157
- Solicitation Number
- 36C25622Q0830
- Response Due
- 5/4/2022 9:00:00 AM
- Archive Date
- 06/03/2022
- Point of Contact
- latonya.mack@va.gov, LaTonya.Mack, Phone: 601-206-6964
- E-Mail Address
-
Latonya.Mack@va.gov
(Latonya.Mack@va.gov)
- Awardee
- null
- Description
- Page 1 of 6 Page 1 of 6 Page 1 of 6 SUBJECT:586-22-2-047-0066- GE Medical Systems SIM Ultrasound PMRS GENERAL INFORMATION CONTRACTING OFFICE S ZIP CODE* SOLICITATION NUMBER* RESPONSE DATE/TIME/ZONE ARCHIVE RECOVERY ACT FUNDS SET-ASIDE PRODUCT SERVICE CODE* NAICS CODE* CONTRACTING OFFICE ADDRESS POINT OF CONTACT* 39157 36C25622Q0830 05-04-2022 11am CENTRAL TIME, CHICAGO, USA 30 DAYS AFTER THE RESPONSE DATE SDVOSB 6515 334517 Department of Veterans Affairs G.V. (Sonny) Montgomery VAMC 1500 E. Woodrow Wilson Dr. Jackson MS 39216 LaTonya Mack latonya.mack@va.gov Page 1 of 6 Page 1 of 6 Page 1 of 6 PLACE OF PERFORMANCE ADDRESS Department of Veteran Affairs G.V. Sonny Montgomery VA Medical Center Deliver to PMRS-Jessie 1500 E Woodrow Wilson Blvd Jackson, MS POSTAL CODE 39216 COUNTRY United States ADDITIONAL INFORMATION AGENCY S URL URL DESCRIPTION AGENCY CONTACT S EMAIL ADDRESS EMAILDESCRIPTION latonya.mack@va.gov DESCRIPTION General Information 586-22-2-047-0066 GE Medical Systems SIM Ultrasound PMRS Document Type: Solicitation Number: Posted Date: Original Response Date: Current Response Date: Product or Service Code: 6515 Set Aside (SDVOSB): Combined Solicitation/Synopsis 36C25622Q0830 04/27/2022 05/4/2022 05/4/2022 Yes NAICS Code: 334517 Contracting Office Address 715 South Pear Orchard Rd Plaza 1 4th Floor Ridgeland MS 39157 Description This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested. Brand name only applies to (GE Medical Systems SIM ultrasound PMRS) for this solicitation. This solicitation is a ""request for quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2019-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 334517, with a small business size standard of 1,000 employees. All interested companies shall provide quotation(s) for the following: Supplies: NX ADDITIONAL: H8041VG 1 GE Medical Systems SIM Ultrasound Therapy System (Physical Therapy) 1 EA H40462LF 2 L8-18i-RS Linear Array Probe 1 EA H48062AB 3 L4-12t-RS Linear Array Probe 1 EA H40482LJ 4 C1-5-RS Wideband Convex Array Probe (USA PoC Only) 1 EA H45051VL 5 Large storage tray 1 EA H45291SI 6 Venue Small Probe Insert 1 EA H45051VA 7 USB Sony UP-D 711MD black white image thermal printer kit (factory installed) 1 EA Delivery shall be provided no later than _30 days after receipt of order/award of contract. Place of Performance Address: Department of Veteran Affairs Central Arkansas Veterans Healthcare Sys Deliver to: PMRS-Jessie 1500 E Woodrow Wilson Blvd Jackson MS 39216 Country: UNITED STATES Award shall be made to the quoter whose quotation offers the best value to the government, considering technical capability, past performance, and price."" The government will evaluate information based on the following evaluation criteria: (1) technical capability factor ""meeting or exceeding the requirement, (2) past performance, and (3) price"". FAR 52.212-2, Evaluation Commercial Items, Lowest Price Technically Acceptable (LPTA) If proposing other than the brand name item, specifications and product literature shall be provided to ensure item meets the salient characteristics identified in the Statement of Work and/or Price/Cost Schedule. If not the OEM (original equipment manufacturer), an OEM authorized dealer/distributor letter shall be included with the offer. Offers that do not provide the requirement documents stated above or do not meet the technical capability requirements shall be eliminated from consideration, regardless of price The following solicitation provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items (Nov 2021) FAR 52.212-3, Offerors Representations and Certifications Commercial Items (Nov 2021) The following contract clauses apply to this acquisition: A.4 52.225-1 BUY AMERICAN SUPPLIES (NOV 2021) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101; (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if (A) The cost of its components mined, produced, or manufactured in the United States exceeds 55 percent of the cost of all its components. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of cost of components . End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled ""Buy American Certificate.""Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.2123, Offerors Representations and Certifications Commercial Items. The following contract clauses apply to this acquisition: FAR 52.212-4, Contract Terms and Conditions Commercial Items (Nov 2021) The Government must exercise its post-acceptance rights-- FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders (Nov 2021) (DEVIATION SEP 2021) A.3 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (FEB 2021) (a) Except as authorized by the Office of Foreign Assets Control (OFAC) in the Department of the Treasury, the Contractor shall not acquire, for use in the performance of this contract, any supplies or services if any proclamation, Executive order, or statute administered by OFAC, or if OFAC's implementing regulations at 31 CFR chapter V, would prohibit such a transaction by a person subject to the jurisdiction of the United States. (b) Except as authorized by OFAC, most transactions involving Cuba, Iran, and Sudan are prohibited, as are most imports from Burma or North Korea, into the United States or its outlying areas. Lists of entities and individuals subject to economic sanctions are included in OFAC's List of Specially Designated Nationals and Blocked Persons at https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-blocked-persons-list-sdn-human-readable-lists. More information about these restrictions, as well as updates, is available in the OFAC's regulations at 31 CFR chapter V and/or on OFAC's Web site at https://home.treasury.gov/policy-issues/office-of-foreign-assets-control-sanctions-programs-and-information. (c) The Contractor shall insert this clause, including this paragraph (c), in all subcontracts. (End of Clause) A.1 52.225-3 BUY AMERICAN FREE TRADE AGREEMENTS ISRAELI TRADE ACT (NOV 2021) ALTERNATE I (JAN 2021) (a) Definitions. As used in this clause Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product means an article that (1) Is wholly the growth, product, or manufacture of Bahrain, Morocco, Oman, Panama, or Peru; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain, Morocco, Oman, Panama, or Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. Canadian end product means an article that (1) Is wholly the growth, product, or manufacture of Canada; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Canada into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101; (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (3) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (4) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if (A) The cost of its components mined, produced, or manufactured in the United States exceeds 55 percent of the cost of all its components. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of cost of components . End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Free Trade Agreement country means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Oman, Panama, Peru, or Singapore. Free Trade Agreement country end product means an article that (1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. Israeli end product means an article that (1) Is wholly the growth, product, or manufacture of Israel; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Israel into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) Components of foreign origin. Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (c) Delivery of end products. 41 U.S.C. chapter 83, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. In addition, the Contracting Officer has determined that FTAs (except the Bahrain, Morocco, Oman, Panama, and Peru FTAs) and the Israeli Trade Act apply to this acquisition. Unless otherwise specified, these trade agreements apply to all items in the Schedule. The Contractor shall deliver under this contract only domestic end products except to the extent that, in its offer, it specified delivery of foreign end products in the provision entitled Buy American Free Trade Agreements Israeli Trade Act Certificate. If the Contractor specified in its offer that the Contractor would supply a Free Trade Agreement country end product (other than a Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product) or an Israeli end product, then the Contractor shall supply a Free Trade Agreement country end product (other than a Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product), an Israeli end product or, at the Contractor's option, a domestic end product. (End of Clause) A.2 52.225-5 TRADE AGREEMENTS (OCT 2019) (JUL 2020) (DEVIATION) (a) Definitions. As used in this clause. Caribbean Basin country end product (1) Means an article that (i)(A) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or (B) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed; and (ii) Is not excluded from duty-free treatment for Caribbean countries under 19 U.S.C. 2703(b). (A) For this reason, the following articles are not Caribbean Basin country end products: (1) Tuna, prepared or preserved in any manner in airtight containers; (2) Petroleum, or any product derived from petroleum; (3) Watches and watch parts (including cases, bracelets, and straps) of whatever type including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the Harmonized Tariff Schedule of the United States (HTSUS) column 2 rates of duty apply (i.e., Afghanistan, Cuba, Laos, North Korea, and Vietnam); and (4) Certain of the following: textiles and apparel articles; footwear, handbags, luggage, flat goods, work gloves, and leather wearing apparel; or handloomed, handmade, and folklore articles; (B) Access to the HTSUS to determine duty-free status of articles of these types is available at https://www.usitc.gov/tata/hts/index.htm. In particular, see the following: (1) General Note 3(c), Products Eligible for Special Tariff treatment. (2) General Note 17, Products of Countries Designated as Beneficiary Countries under the United States Caribbean Basin Trade Partnership Act of 2000. (3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b). (4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits under the United States Caribbean Basin Trade Partnership Act; and (2) Refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the acquisition, includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. Designated country means any of the following countries: (1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as ""the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu (Chinese Taipei) ), Ukraine, or United Kingdom); (2) A Free Trade Agreement (FTA) country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Oman, Panama, Peru, or Singapore); (3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or (4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago). Designated country end product means a WTO GPA country end product, an FTA country end product, a least developed country end product, or a Caribbean Basin country end product. End product means those articles, materials, and supplies to be acquired under the contract for public use. Free Trade Agreement country end product means an article that (1) Is wholly the growth, product, or manufacture of a Free Trade Agreement (FTA) country; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an FTA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services, (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. Least developed country end product means an article that (1) Is wholly the growth, product, or manufacture of a least developed country; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. United States means the 50 States, the District of Columbia, and outlying areas. U.S.-made end product means an article that is mined, produced, or manufactured in the United States or that is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. WTO GPA country end product means an article that (1) Is wholly the growth, product, or manufacture of a WTO GPA country; or (2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services, (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself. (b) Delivery of end products. The Contracting Officer has determined that the WTO GPA and FTAs apply to this acquisition. Unless otherwise specified, these trade agreements apply to all items in the Schedule. The Contractor shall deliver under this contract only U.S.-made or designated country end products except to the extent that, in its offer, it specified delivery of other end products in the provision entitled ""Trade Agreements Certificate."" (End of Clause) This combined synopsis/solicitation for supplies as defined herein. The government intends to award a ""contract"" as a result of this combined synopsis/solicitation that will include the terms and conditions set forth herein. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: ""The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition."" OR ""The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:"" ""quote"" shall list exception(s) and rationale for the exception(s). Submission shall be received not later than 11am on Wednesday, MAY 4, 2022. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Only e-mailed quotes will be accepted. Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the LaTonya Mack; latonya.mack@va.gov. Point of Contact LaTonya Mack Latonya.mack@va.gov 601-206-6964 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 36C25622Q0830 and is issued as an (RFQ) Request for Quotation, unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2019-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 334517. This procurement is being conducted in accordance with FAR Part 13.5 Simplified Procedures for Certain Commercial Items. All Quote Questions shall be submitted to the Contracting Officer via email to LaTonya.mack@va.gov by 3p.m. Central Time on Friday April 29,2022. All responses to questions, which may affect quote, will be incorporated into a written amendment to the solicitation. Responses are due Wednesday, May 4, 2022 at 11a.m. Central Time. Only electronic offers will be accepted; submit quotation to latonya.mack@va.gov. (The End) End of Document
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/18dc6ae47885482eb1194b1423c94086/view)
- Place of Performance
- Address: Department of Veteran Affairs G.V. Sonny Montgomery VAMC Deliver to: PMRS-Jessie 1500 E Woodrow Wilson Blvd, Jackson 39216
- Zip Code: 39216
- Zip Code: 39216
- Record
- SN06310136-F 20220429/220427230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |