SOURCES SOUGHT
66 -- Test Set Electrical 6625
- Notice Date
- 4/28/2022 5:22:01 AM
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M922R0006
- Response Due
- 5/5/2022 12:00:00 PM
- Point of Contact
- Ken Pliska614-692-5373, Herman Poe614-692-2865
- E-Mail Address
-
Ken.Pliska@dla.mil, Herman.Poe@dla.mil
(Ken.Pliska@dla.mil, Herman.Poe@dla.mil)
- Description
- NSN��� 6625-01-323-9584 TEST SET, ELECTRONIC RQ035: ITEM MAY CONTAIN BATTERIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGEACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIREDINSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).� PER MANUFACTURER L-3, CAGE 0B107, MATERIAL DOES NOT CONTAIN ANY HAZARDOUS SUBSTANCE. SERIAL NUMBER MARKING: ANY ITEM OR SUBASSEMBLY WHICH CONTAINS A SERIALIZATION REQUIREMENT SHALL HAVE SERIAL NUMBERS APPLIED TO EACH ITEM IN THE PLACE PROVIDED RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. FULL AND OPEN COMPETITION APPLY IAW BASIC DRAWING NR 80063 A3139775 REVISION NR D�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139780 REVISION NR���� DTD 08/19/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139775 REVISION NR���� DTD 11/20/2019 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139779 REVISION NR���� DTD 08/19/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139776 REVISION NR C�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139777 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139778 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139779 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139780 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139783 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139785 REVISION NR C�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139787 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139790 REVISION NR B�� DTD 09/13/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139807 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139808 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139809 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139812 REVISION NR C�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139813 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139850 REVISION NR D�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139787 REVISION NR���� DTD 08/19/1991 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139790 REVISION NR���� DTD 01/01/1901 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139842 REVISION NR A�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3139804 REVISION NR B�� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139804 REVISION NR���� DTD 08/19/1991 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-PRF-49318A NOT 2 REVISION NR A�� DTD 02/12/2019 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139777 REVISION NR���� DTD 08/19/1981 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3313438 REVISION NR���� DTD 11/10/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187591 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139809 REVISION NR���� DTD 08/19/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187608 REVISION NR���� DTD 02/26/1996 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3139778 REVISION NR���� DTD 08/19/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187592 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187594 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187596 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187609 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187610 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187639 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187633 REVISION NR A�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187634 REVISION NR A�� DTD 05/21/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187635 REVISION NR���� DTD 08/10/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3187632 REVISION NR A�� DTD 05/21/2008 PART PIECE NUMBER:
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/84c55404fdc0495aaa7a52ceb838019e/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06312000-F 20220430/220428230108 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |