SOLICITATION NOTICE
66 -- 66--Environmental Testing Chamber (ETC)
- Notice Date
- 5/4/2022 6:00:38 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N68335-22-R-0182
- Response Due
- 6/13/2022 1:00:00 PM
- Archive Date
- 12/10/2022
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N68335-22-R-0182 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 334519 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-06-13 16:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be St. Inigoes, MD 20684 The NAWC-AD Lakehurst requires the following items, Meet or Exceed, to the following: LI 001: Post Award Preliminary Design Review (PDR) (Vendor and OPD) in accordance with the Statement of Work and CDRL A001, 1, EA; LI 002: Site Plan and Installation Guide in accordance with the Statement of Work and CDRL A002, 1, EA; LI 003: OPTION: Environmental Test Chamber in accordance with the Statement of Work, 1, EA; LI 004: OPTION: Factory Acceptance Testing in accordance with the Statement of Work and CDRL A003, 1, EA; LI 005: OPTION: Chamber Installation at ETL and Acceptance testing of ETL in accordance with the Statement of Work and CDRLs A004, A005, A006, A007, and A008., 1, EA; LI 006: Contract Data Requirements Lists (CDRLS), Exhibit A, 1, NSP; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a quote on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. This procurement will be issued as a 100% Small Business Set Aside under NAICS 334519 - Other Measuring and Controlling Device Manufacturing with a size standard of 500 employees. Therefore, all small businesses under the applicable NAICS are eligible to submit a quote under this requirement. Bid MUST be good for 90 calendar days after close of Buy. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The Offeror certifies that it has read and understands the attached terms and conditions. The Offeror takes no exception to the Terms and Conditions outlined in Attachment 006 - Contract Terms and Conditions. WARNING: DRAWINGS AND SPECIFICATIONS MAY CONTAIN TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22 U.S.C. SEC. 2751 ET.SEQ.) OR EXECUTIVE ORDER 2470. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. THEREFORE YOUR ATTENTION IS DIRECTED TO FAR CLAUSE 252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) INCLUDED IN ATTACHMENT 006. INTERESTED PARTIES MAY NOT RECEIVE EXPORT CONTROL DATA/DRAWINGS WITHOUT FIRST PROVIDING THE CONTRACTING OFFICE WITH A COPY OF THEIR VALID CERTIFICATION DD2345. Please submit a valid DD2345 no later than 10 business days after release of this combined synopsis/solicitation via email to Jennifer Casale, at jennifer.n.casale2.civ@us.navy.mil. Your DD2345 will be reviewed and if found valid and complete, the Site Play Layout and download instructions will be sent electronically to the data custodian designated on the DD2345 through the DoD SAFE web application at https://safe.apps.mil/. For more information on Form DD2345, contact the Joint Certification Program (JCP) by email at JCP-ADMIN@DLA.MIL or by phone at (877) 352-2255. You can also visit JCP on the web to obtain further instructions, and review FAQs at https://www.dla.mil/Logistics-Operations/Services/JCP/ ALL questions pertaining to this solicitation shall be submitted in writing through the Unison web tool no later than 11:00 AM EDT, 15 business days after release of this combined synopsis/solicitation. Should content of the questions exceed the allowable space in the ""Submit a Question"" feature, questions shall be provided in writing to a Unison representative. All questions submitted will be reviewed and responses will be provided by our agency in Q&A format as an amendment to this combined synopsis/solicitation posting, publicized for all industry to view. Questions that are submitted after the Question Submission Deadline specified in the solicitation will NOT be considered. FAR provision at 52.212-2 EVALUATION - COMMERCIAL ITEMS (OCT 2014) applies to this procurement and contains the specific evaluation criteria for this requirement. The Offeror shall certify that it can Meet NOT Exceed all of the requirements of this solicitation.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ded76da7f3764617830dbd5f986e0fc2/view)
- Place of Performance
- Address: NAWCAD 17617 NESEA Way, Building 8009, St. Inigoes, MD 20684, USA
- Zip Code: 20684
- Country: USA
- Zip Code: 20684
- Record
- SN06317518-F 20220506/220504230113 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |