SAMDaily.us | PRESOL | 71 | 71--FY22OfficeFurniture

SAMDAILY.US - ISSUE OF MAY 19, 2022 SAM #7475
SOLICITATION NOTICE

71 -- 71--FY22OfficeFurniture

Notice Date: 5/17/2022 2:43:57 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 442110 — Furniture Stores
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: FY22OfficeFurniture
Response Due: 6/15/2022 9:00:00 AM
Archive Date: 12/12/2022
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FY22OfficeFurniture and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 442110 with a small business size standard of $20.50M. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-06-15 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Carson, CO 80919 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: USWS STEELCASE Worksurface-Straight, Laminate, Plastic edge profile Size Option: Modular Depth: 36.00000 Width: 72.00000 Top Surface Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Grain Direction: Long Grain Edge Finish: Plastic - PG1 6242 - VIRGINIA WALNUT Power Access: No Power Access Scallop: No Scallop Grommet: No Grommet Cord Drop: No Cord Drop CONFERENCE 118 36/72, 2, EA; LI 002: USWS STEELCASE Worksurface-Straight, Laminate, Plastic edge profile Size Option: Modular Depth: 36.00000 Width: 96.00000 Top Surface Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Grain Direction: Long Grain Edge Finish: Plastic - PG1 6242 - VIRGINIA WALNUT Power Access: No Power Access Scallop: No Scallop Grommet: No Grommet Cord Drop: No Cord Drop CONFERENCE 118 36/96, 1, EA; LI 003: UPL4 STEELCASE Post leg, Package quantity 4, Glides, 28 1/2H LEGS :7238 FIELDSTONE CONFERENCE 118 PL, 3, EA; LI 004: PTDMGB3 STEELCASE UPL4 STEELCASE 140.77 422.31 Post leg, Package quantity 4, Glides, 28 1/2H LEGS :7238 FIELDSTONE CONFERENCE 118 PC, 3, EA; LI 005: TS7WKSPT66 STEELCASE Reinforcing channel, 66W CONFERENCE 118, 2, EA; LI 006: TS7WKSPT72 STEELCASE Reinforcing channel, 72W CONFERENCE 118 RC, 1, EA; LI 007: 490410UC STEELCASE Move; Chair, Upholstered back, No arms, Casters FRAME :7239 MIDNIGHT SHELL :6205 BLACK CONFERENCE 118 MOVE UPHLSTRY:5876 NAVY OPTIONS * * OPTIONS * * CASTER *OPT:CASTERS HARD CST STD:HARD CASTERS, 25, EA; LI 008: UHSPSH STEELCASE SCREEN SIDE MOUNT OLOGY MIGRATION FLEX Height: 18.00000 Width: 23.00000 Screen Finish: Plastic A 6731 - NARROW FLUTED OPEN OFFICE 114 PS/18/23 CLEAR Bracket Finish: Textured Paint 7207 - BLACK Bracket Shape: Rectilinear, 30, EA; LI 009: AP52 STEELCASE Screen-Privacy, Universal clamp, 52W BASIC :0835 BLACK OPEN OFFICE 114 P/52, 30, EA; LI 010: CFMDSP STEELCASE CF Series; Monitor arm-Pole mount, Dual, C clamp, Static BASIC :7018 PEWTER OPTIONS * * OPTIONS * * TILTHEAD *OPT:TILTHEAD OPTION CFSTD CF SERIES STANDARD TILT OPEN OFFICE 114 FAPMDCC HEAD BRACKET *OPT:BRACKET OPTIONS CC CF SERIES C-CLAMP POLE *OPT:POLE OPTION 14INCH STD:14 INCH OPTION, 30, EA; LI 011: TS2PBF19M STEELCASE Ped-Mbl,B/F,19D BASIC :7238 FIELDSTONE KEYS :SK PLUG OPTIONS * * OPTIONS * * CASTER *OPT:CASTERS STANDARD STANDARD SMALL CASTER TRIM OPT *OPT:TRIM STRIP PULL OPTION NO TRIM STD:NO TRIM PULLS *OPT:PULL OPTIONS LEDGE LEDGE PULL PULL PULL TEXT PNT *PULL:TEXTURED PAINT 7207 BLACK OPEN OFFICE 114 BF, 30, EA; LI 012: 435A00 STEELCASE Steelcase Series 1; Chair-Task Back Finish: 3D Microknit 5T21 - LICORICE Back Color Scheme: Non-Contrasting Outer Back Outer Back Finish: Plastic - PG1 6205 - BLACK Seat Finish: Foundation 5875 - BLACK Headrest Option: No Headrest Coat Hanger: No Coat Hanger Frame Finish: Plastic - PG1 6205 - BLACK Color Scheme: Black Arm Type: Height,Width,Pivot,Depth Arm Cylinder Type: Standard Range Base Type: Plastic Base Base Finish: Plastic - PG1 6205 - BLACK Lumbar Option: Adjustable Lumbar Caster or Glide Type: Hard Casters Soil Retardant Option: No Soil Retardant Sewn Upholstery Type: Sewn OPEN OFFICE 114 SERIES1, 30, EA; LI 013: MGSLTRQ STEELCASE Migration SE; Desk-Rectangle, T leg, Basic height Size Option: Modular Depth: 23.00000 Width: 58.00000 Overhang: No Overhang Top Surface Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Edge Finish: Plastic - PG1 6242 - VIRGINIA WALNUT Base Finish: Textured Paint 7360 - MERLE Controller: Up/Down Controller Foot Option: Squared Edge OPEN OFFICE 114 23/58/BSC-UP, 30, EA; LI 014: LLRDS STEELCASE Light-LED, Radial, Desktop, Single arm BASIC :4799 PLATINUM METALLIC OPTIONS * * OPTIONS * * OCCUPANCY *OPT:OCCUPANCY SENSOR OPTION NOSENSOR NO OCCUPANCY SENSOR MOUNTBRKT *OPT:MOUNT BRACKET OPTION FRSTBASE FREESTANDING BASE OPEN OFFICE 114 RL-F, 30, EA; LI 015: CRDSK STEELCASE Desk Depth: 24.00000 Width: 72.00000 Support - Right: Full Depth End Panel Support - Left: Full Depth End Panel Modesty Panel: Quarter Height Worksurface Thickness: 1.12500 Case Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Top Surface Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Edge Finish: Plastic - PG1 6242 - VIRGINIA WALNUT PRIVATE OFFICES 115-117 24/72, 3, EA; LI 016: UFB STEELCASE Bracket-Flush mount PRIVATE OFFICES 115-117 BRKT, 3, EA; LI 017: UCL STEELCASE C legs-Double post, Glides, 28 1/2H LEGS :7360 MERLE PRIVATE OFFICES 115-117 UCL, 3, EA; LI 018: AM64 STEELCASE Screen-Modesty, Universal clamp, 64W BASIC :0835 BLACK PRIVATE OFFICES 115-117 M/64, 3, EA; LI 019: CFMDSP STEELCASE CF Series; Monitor arm-Pole mount, Dual, C clamp, Static BASIC :7018 PEWTER OPTIONS * * OPTIONS * * TILTHEAD *OPT:TILTHEAD OPTION CFSTD CF SERIES STANDARD TILT HEAD BRACKET *OPT:BRACKET OPTIONS CC CF SERIES C-CLAMP POLE *OPT:POLE OPTION 14INCH STD:14 INCH OPTION PRIVATE OFFICES 115-117 FAPMDCC, 3, EA; LI 020: CRCT STEELCASE Common Top Rectangular Depth: 24.00000 Width: 42.00000 Top Surface Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Edge Finish: Plastic - PG1 6242 - VIRGINIA WALNUT Worksurface Thickness: 1.12500 PRIVATE OFFICES 115-117 CT/24/42, 3, EA; LI 021: TS2TWR54R STEELCASE Tower-Storage, Shelf, Wardrobe hook, Right hand, 54H BASIC :7238 FIELDSTONE KEYS :SK PLUG OPTIONS * * OPTIONS * * PULLS *OPT:PULL OPTIONS LEDGE LEDGE PULL PULL PULL TEXT PNT *PULL:TEXTURED PAINT 7207 BLACK LOCK OPT *OPT:DOOR(S) DRAWER LOCK OPTIONS DWR LOCK STD:DRAWER LOCK DRAWER *OPT:DRAWER OPTIONS FIL/FIL STD:FILE FILE DRAWERS PRIVATE OFFICES 115-117 ST/54, 1, EA; LI 022: TS2TWR54L STEELCASE Tower-Storage, Shelf, Wardrobe hook, Left hand, 54H BASIC :7238 FIELDSTONE KEYS :SK PLUG OPTIONS * * OPTIONS * * PULLS *OPT:PULL OPTIONS LEDGE LEDGE PULL PULL PULL TEXT PNT *PULL:TEXTURED PAINT 7207 BLACK LOCK OPT *OPT:DOOR(S) DRAWER LOCK OPTIONS DWR LOCK STD:DRAWER LOCK DRAWER *OPT:DRAWER OPTIONS FIL/FIL STD:FILE FILE DRAWERS PRIVATE OFFICES 115-117 ST/54, 2, EA; LI 023: LOCK9201FR STEELCASE Lock Cylinder-FR Series, Polished Chrome LOCK :9201 POLISHED CHROME KEYS :SK SPEC 2-FR415 2-FR416 2-FR417 PRIVATE OFFICES 115-117, 3, EA; LI 024: TS2PBF19M STEELCASE Ped-Mbl,B/F,19D BASIC :7238 FIELDSTONE KEYS :SK PLUG OPTIONS * * OPTIONS * * CASTER *OPT:CASTERS STANDARD STANDARD SMALL CASTER TRIM OPT *OPT:TRIM STRIP PULL OPTION NO TRIM STD:NO TRIM PULLS *OPT:PULL OPTIONS LEDGE LEDGE PULL PULL PULL TEXT PNT *PULL:TEXTURED PAINT 7207 BLACK PRIVATE OFFICES 115-117 BF, 3, EA; LI 025: 435A00 STEELCASE Steelcase Series 1; Chair-Task Back Finish: 3D Microknit 5T21 - LICORICE Back Color Scheme: Non-Contrasting Outer Back Outer Back Finish: Plastic - PG1 6205 - BLACK Seat Finish: Foundation 5875 - BLACK Headrest Option: No Headrest Coat Hanger: No Coat Hanger Frame Finish: Plastic - PG1 6205 - BLACK Color Scheme: Black Arm Type: Height,Width,Pivot,Depth Arm Cylinder Type: Standard Range Base Type: Plastic Base Base Finish: Plastic - PG1 6205 - BLACK Lumbar Option: Adjustable Lumbar Caster or Glide Type: Hard Casters Soil Retardant Option: No Soil Retardant Sewn Upholstery Type: Sewn PRIVATE OFFICES 115-117 SERIES1, 3, EA; LI 026: MGSLTRQ STEELCASE Migration SE; Desk-Rectangle, T leg, Basic height Size Option: Modular Depth: 29.00000 Width: 70.00000 Overhang: No Overhang Top Surface Finish: Woodgrain HPL 2535 - VIRGINIA WALNUT (HPL) Edge Finish: Plastic - PG1 6242 - VIRGINIA WALNUT Base Finish: Textured Paint 7360 - MERLE Controller: Up/Down Controller Foot Option: Squared Edge PRIVATE OFFICES 115-117 29/70/BSC-UP, 3, EA; LI 027: 490410UC STEELCASE Move; Chair, Upholstered back, No arms, Casters FRAME :7239 MIDNIGHT SHELL :6205 BLACK UPHLSTRY:5876 NAVY OPTIONS * * OPTIONS * * CASTER *OPT:CASTERS HARD CST STD:HARD CASTERS PRIVATE OFFICES 115-117 MOVE, 6, EA; LI 028: LLRDS STEELCASE Light-LED, Radial, Desktop, Single arm BASIC :4799 PLATINUM METALLIC OPTIONS * * OPTIONS * * OCCUPANCY *OPT:OCCUPANCY SENSOR OPTION NOSENSOR NO OCCUPANCY SENSOR MOUNTBRKT *OPT:MOUNT BRACKET OPTION FRSTBASE FREESTANDING BASE PRIVATE OFFICES 115-117 RL-F, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/2f699abbadac4f57b834948e955f4ab5/view)
Place of Performance: Address: BLDG 7402, Bad Toelz Rd , Fort Carson, CO 80919-4602, USA; Zip Code: 80919-4602; Country: USA
Record: SN06329882-F 20220519/220517230106 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

71 -- 71--FY22OfficeFurniture