SAMDaily.us | SRCSGT | 47 | 3 NSN SOURCES SOUGHT

SAMDAILY.US - ISSUE OF JUNE 03, 2022 SAM #7490
SOURCES SOUGHT

47 -- 3 NSN SOURCES SOUGHT

Notice Date: 6/1/2022 10:30:27 AM
Notice Type: Sources Sought
NAICS: 332996 — Fabricated Pipe and Pipe Fitting Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: 1000127222
Response Due: 6/8/2022 10:00:00 AM
Point of Contact: Scott D. Knowles, Phone: 6146920639
E-Mail Address: scott.knowles@dla.mil
(scott.knowles@dla.mil)
Description: ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.� � � � � � � � � � � � � � � � � � � � � � NO SOLICITATION IS BEING ISSUED AT THIS TIME. � The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. �Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. �Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. �All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. �Phone 614 692-0639. We thank you in advance for your assistance. NSN�� NAME�� 4720-01-007-1940�� HOSE, NON-METALLIC 4730-00-007-2199�� ADAPTER, STRAIGHT 4730-01-092-6127�� ELBOW, HOSE Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. NSN: 4720-01-007-1940 HOSE, NON-METALLIC RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ZD064: The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, � � �apply to this procurement. �Review the Technical Data Package (TDP) for � � �additional information. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES � �� 5 INCH ID, BULK LENGTH ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL � � �NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT � � �CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED � � �UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY � � �USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED � � �INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; � � �AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. � � �PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS � � �CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN � � �A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR � � �MERCURY COMPOUND. (IAW NAVSEA 5100-003D). CS046: THIS NSN IS LISTED AS A PRIMARY QPL OR QML � � �THEREFORE THE QUALIFIED PRODUCTS LIST OR � � �QUALIFIED MANUFACTURERS LIST IS APPLICABLE. RQ027: � � �A. Data required by this document will be included in the price of the � � �procured item(s). � � �B. The supplier shall prepare and furnish one (1) copy of the � � �Certificate of Quality Compliance (COQC) for all delivered supplies. �If � � �the supplies delivered under this contract are from more than one � � �manufacturing lot, a separate one (1) copy of the COQC shall be prepared � � �and furnished for each manufacturing lot represented by, manufactured or � � �produced under a product specification, original equipment manufacturer � � �(OEM)/manufacturer's part number, commercial, industry or military � � �standard, or drawings, or other technical data. �Each Certificate shall � � �be prepared in accordance with the Supplemental Quality Assurance � � �Provision (SQAP). � � �C. For contracts assigned for Government inspection at source, the � � �supplier shall have the completed Certificate available for review by � � �the Government representative when the material is presented for � � �acceptance by the Government. The Government representative can sign off � � �on the WAWF receiving report so long as the Contractor complied with the � � �COQC and the documentation is uploaded as an attachment to the � � �Production CLIN in iRAPT. � � �D. An electronic copy of each COQC, for Government records retention, � � �shall be entered into the Invoicing, Receipt, Acceptance and Property � � �Transfer (iRAPT) system by the supplier via the Attachment tab of the � � �Receiving Report (RR). Instructions for entering Attachments can be � � �found in the iRAPT - Web Based Training Main Menu under ""Attachments � � �which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut � � �h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material� � � �to the Government is not the manufacturer of the � � �material, the supplier is responsible for obtaining a certified test � � �report from the manufacturer, including it as part of this COQC, and for � � �demonstrating that the specific material being offered under this � � �Certificate is covered by the certified test report. The data submittal � � �listed above is in addition to the other iRAPT requirements included in � � �this contract. �Whenever access to the iRAPT system is limited or not � � �available, the supplier shall notify the PCO and request permission to � � �submit documents manually until the iRAPT system is again available for � � �use. Unless otherwise specified by the contract, the supplier shall be � � �responsible for retaining the Certificate for a period of 4 years. �When � � �requested by the Contracting Officer, the supplier shall make the � � �Certificate available for review by the Government at any time during � � �the period the Certificate is required to be retained. � � �E. No Certificate of Conformance (COC) or alternate release is � � �authorized. � � � � � � � � � � � � �End of Requirement RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) �item with a � � �shelf life of 120 months (non-extendable) applies to this item. CRITICAL APPLICATION ITEM � � �IAW BASIC SPEC NR MIL-DTL-24136/1B � � �REVISION NR B � DTD 09/24/2020 � � �PART PIECE NUMBER: M24136/1-80 � � �IAW REFERENCE SPEC NR MIL-DTL-24136C(1) � � �REVISION NR C � DTD 12/14/2021 � � �PART PIECE NUMBER: M24136/1-80 � � �IAW REFERENCE STD NR MIL-STD-129R(2) � � �REVISION NR R � DTD 09/27/2019 � � �PART PIECE NUMBER: TYPE 1 SHELF-LIFE, 120 MONTHS � � �IAW REFERENCE UNK QPL-24136-36 NOT 1 � � �REVISION NR 36 �DTD 04/05/2011 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:BLK �PRES MTHD:AE �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:00 �CUSH/DUNN MAT:00 �CUSH/DUNN THKNESS:0 UNIT CONT:10 �OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER:CQSLW THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ____________________________________________________________________________________ NSN: 4730-00-007-2199 ADAPTER, STRAIGHT, TUBE TO HOSE. STAINLESS. EXCEPTION: THREADS ON NIPPLE MAY BE CUT, GROUND OR ROLLED. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT CS072: CLASS 3 THREADS APPLY TO THIS NSN. CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE � � �USED NOR INCORPORATED IN ANY ITEMS TO BE � � �DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION � � �SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT � � �DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. � � �SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR � � �APPROVAL UNLESS THEY ARE AUTHORIZED BY THE � � �SPECIFICATION REQUIREMENTS. CRITICAL APPLICATION ITEM � � �IAW BASIC SPEC NR MS27053E NOT 1 � � �REVISION NR E � DTD 07/11/2018 � � �PART PIECE NUMBER: MS27053-3-4C � � �IAW REFERENCE SPEC NR MIL-DTL-27272D(1) � � �REVISION NR D � DTD 06/20/2017 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951 THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ____________________________________________________________________________________ NSN: 4730-01-092-6127 ELBOW, HOSE RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ZD003: A metal casting process was identified as a means to manufacture this � � �item. � Tooling is required to produce a casting. �For sourcing, � � �tooling, materials or other information, please contact the appropriate � � �assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land � � �& Maritime Supply Chains) DSCC.cast.forge@dla.mil RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND � � �NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ZD080: SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL � � �NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT � � �CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED � � �UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY � � �USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED � � �INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; � � �AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. � � �PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS � � �CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN � � �A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR � � �MERCURY COMPOUND. (IAW NAVSEA 5100-003D). CS046: THIS NSN IS LISTED AS A PRIMARY QPL OR QML � � �THEREFORE THE QUALIFIED PRODUCTS LIST OR � � �QUALIFIED MANUFACTURERS LIST IS APPLICABLE. CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE � � �USED NOR INCORPORATED IN ANY ITEMS TO BE � � �DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION � � �SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT � � �DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. � � �SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR � � �APPROVAL UNLESS THEY ARE AUTHORIZED BY THE � � �SPECIFICATION REQUIREMENTS. CQ003: ""EXCEPTION DATA: PROOF AND BURST PRESSURE � � �TESTING, AS DESCRIBED IN PARAGRAPH 4.6.1 � � �AND 4.6.6 OF APPLICABLE SPECIFICATIONS, ARE � � �NOT REQUIRED IN THE LOT ACCEPTANCE OF THESE � � �FITTINGS."" CRITICAL APPLICATION ITEM � � �IAW BASIC SPEC NR MIL-DTL-24787/5A � � �REVISION NR A � DTD 09/24/2020 � � �PART PIECE NUMBER: MIL-F-24787/5GR IX,TY,D,SZ 96 � � �IAW REFERENCE SPEC NR MIL-DTL-24787A � � �REVISION NR A � DTD 09/24/2020 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 �PRES MTHD:10 �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:00 �CUSH/DUNN MAT:AD �CUSH/DUNN THKNESS:B UNIT CONT:D3 �OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Web Link: SAM.gov Permalink
(https://sam.gov/opp/e6b0d5716795406ea525eb87972bb83f/view)
Place of Performance: Address: Columbus, OH 43218, USA; Zip Code: 43218; Country: USA
Record: SN06344762-F 20220603/220601230110 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

47 -- 3 NSN SOURCES SOUGHT