Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 05, 2022 SAM #7492
SOURCES SOUGHT

42 -- PPE Uniforms for Montrose Fire Department

Notice Date

6/3/2022 6:44:59 AM
 

Notice Type

Sources Sought
 

NAICS

315220 — Men's and Boys' Cut and Sew Apparel Manufacturing
 

Contracting Office

242-NETWORK CONTRACT OFFICE 02 (36C242) ALBANY NY 12208 USA
 

ZIP Code

12208
 

Solicitation Number

36C24222Q0794
 

Response Due

6/9/2022 8:00:00 AM
 

Archive Date

07/09/2022
 

Point of Contact

Wilmen.Joa@va.gov, Wilmen Joa
 

E-Mail Address

wilmen.joa@va.gov
(wilmen.joa@va.gov)
 

Awardee

null
 

Description

This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of potential qualifications relative to the North American Industry Classification Code (NAICS) 315220. The Department of Veteran s Affairs is seeking small business manufacturer or distributors of small business manufacturers, of functionally Brand-Name only to all the following: LION® PPE Uniforms for Montrose Fire Department Item # Description/Part Number* Qty Turnout Coat Turnout Coat Custom Turnout Coat - 2022 -V-Force Bi-Swing LION Turnout V-Forcer Bi-Swing Coat -CVBM-32 32"" Male V-Forcer Bi-Swing Coat isodri coat -CVBM32K7-C2 Traditional Liner, Glide IceT face cloth quilted to DWR treated 2.3 oz NOMEXr/Kevlarr spunlace & DWR treated 1.5 oz AraFlor, CROSSTECHr BLACK (Type 2F) PTFE/Nomexr Pajama Check laminated membrane -LYR233 (Std) Semper Drir front and back yokes sewn to coat thermal liners. (RM1377-059) - V-Force Bi-Swing -CLW227Z Chambray DWR 2-Layer AraFlo E89 Quilt with Chambray face cloth//Pajama Check CROSSTECH with 1"" elastic wrist shield. Waterwell with thermoplastic zipper - pull side sewn to coat liner sleeves. - V-Fit -CLW758 6"" isodri wristlet sew to liner system with 5/8""x3 1/8"" nomex webbing thumbloop. -CVBM-32-ARA Armor AP, 6.5 oz, Black, Khaki, or Gold -FAB-KHAKI Khaki Outer Shell Material -CT224-RPY 3"" NYC L/Y Diamond Oralite (Reflexite) Ventilated Triple Trim for V-Force -BHS020 (Std) DRD: Firefighter Recovery Harness with 2"" welt and 4.5x3.25"" flap with rounded corners. 1 piece 1x2"" loop for harness storage. 2 pieces 1x2"" loop on shellflap closure, 2 pieces 1x2"" hook on flap. 1 piece 1.5x2"" hook on harness. 1 piece 2x2"" loop underneath chest trim for harness storage, 1 pair 1x3.5"" self-fabric straps with 1x2"" hook and loop. The loop handle shall have a silver retro-reflective LION logo patch. -CSA709V (Std) 1x3.5"" Self Fabric strap w/ 1 end sewn to coat shell & opposite end loose w/ 1 female non-logo snap, 1 male snap on liner centered at bottom rear panel to align w/ the female snap. (Cannot be used on coat where liner is 3"" from shell). (Standard on V-Force) -CR236Z 3"" split self fabric collar with CROSSTECHr PJ lined. 2 pieces 1x3"" hook on each end inside, thermoplastic zipper - pull side set along top edge for attachment to liner. 1.5x4"" hook&loop with x-stitch for front closure. V-Fit -CLF221Z 3"" Self fabric, PJ CROSSTECH lined split collar with 2 pieces 1x3"" loop on moisture barrier, thermoplastic zipper - pin side set along top edge for attachment to shell. Use with CR236Z & CR237Z -CLO208 (Std) Coat liner inspection system located at center right front of liner, with 1x4"" loop. V-Fit coats -MF020 (Std) 1.5x5"" hook sewn to right front shell for the Coat Liner Inspection System - V-Fit -CC711-BLK Black Poly-Coated Aramid Cuff Reinforcements - V-Fit -EB517 (Std) Contoured self fabric elbow patch - no padding, V-Force Bi-Swing -SC715-ZO1V (Std) Self fabric shoulder caps -SF242-ZO1 5"" Stormflap (square corners) w/ 2 layer self fabric & crosstech pjc, hook & dee in, 2"" hook & loop out(loop & 4 drings on coat front, 4-701's on stormflap side & ****hook on stormflap****) for V-Fit Bi-Swing design COAT_POCKET Coat Pockets -HP650-ZO1 (2) 9x9x2"" semi-bellows and handwarmer pocket combination. 6"" opening on bellows side, KEVLARr twill backing, handwarmer lined with fleece inside pocket and against shell. 2 pieces 1.5x3"" loop on pocket and 2 pieces 1.5x3"" hook on flap, 2 layers Lite-N-Dri inside flap corner, PCA pull tab. (For 30.5"" and shorter coats, use HP610) -PKTLOC-FOHP Front bottom- Left & Right -RP689-ZO1 3.5x9x2"" Radio pocket w/ polycotton fully lined all 3 sides inside pocket, 1pc. 1x2"" loop on pocket & 1pc. 1x2"" hook on flap, antenna notch on each side on flap. PKTLOC-CL Chest Left -EM5- 2x3"" American Flag Emblem (Stars on upper right corner) -LOC-SR Sleeve Right -FLS561-ZO1 1.5x3"" self fabric flashlight strap tacked to shell, 1.5x8"" self fabric lower holder X-stitched to shell with 1 piece 1x2"" hook on one end & 1 piece 1x2"" loop on opposite end, 3"" between tab & lower holder. FLSLOC-RC Right Chest -LTSL3YIS Sewn On 3"" Lime/Yellow 3MT ScotchliteT Letters (each line) max 5 Alpha Numeric ID Characters -LT Lettering shall be V A F D LTLOC-AY Across yoke -LP49-ZO1 7x22"" contoured 2 layer self fabric one line letter patch to be attached to hem of coat. -LPSP The Letter Patch shall be sewn directly to Coat. -CTB36RP2Y 2"" Solid Diamond Yellow reflecxite perforated trim set horizontal across contoured letter patch, 4 rows lockstitch -LP15-ZO1 4x15"" 1 line letter patch >>> WHEN USED 1"" ABOVE HEM TRIM W/ 10X10 PKTS, USE LP65 ON SIZES BELOW 36. -LPV2 Hook (Patch) & Loop (Garment) attachment for letter patch ***Cann't use with LP49 or LP34 on Coat Tail Panel** -LTLOC-A Shall be located Shall be located LP15 to be on LP49 -LTSL3YNS Sewn On 3"" Lime/Yellow 3MT ScotchliteT Letters (each line) 6 - 12 Alpha Numeric Name Characters -LT Lettering shall be Firefighter's Last Name -LTLOC-OP On above patch -MF011C 1 Dee ring attached to coat -LOC-another loc see notes Another location 1"" Below Right Chest Trim, 1"" to right of SF -MT503 1x3"" triple layer self fabric mic tab bartacked each end. -MTLOC-RCARP Right Chest above Radio Pocket -MT503 1x3"" triple layer self fabric mic tab bartacked each end. -MTLOC-A Another location - on storm flap, 3"" down from top at 1 o'clock/7 o'clock angle -HL02 (Std) 5/8"" x 4 1/2"" Self fabric hangerloop. 10 Turnout Pants Turnout Pants Custom Turnout Pants - 2022 V-Forcer Belted Pant isodri pant -PVFMK7-C2 Traditional Liner, Glide IceT face cloth quilted to DWR treated 2.3 oz NOMEXr/Kevlarr spunlace & DWR treated 1.5 oz AraFlor, CROSSTECHr BLACK (Type 2F) PTFE/Nomexr Pajama Check laminated membrane -PLO200 (Std) Pant liner inspection system with 1x5"" loop located at right side of liner waist. -MF018 (Std) 1.5x5"" hook sewn to right shell front for the pant liner inspection system. -PVFM-ARA Armor AP, 6.5 oz, Black, Khaki, or Gold -FAB-P-KHAKI Khaki Outer Shell Material -FLY233Z-R Sewn on pant FLY with PJ CROSSTECHr, closure thermo plastic zipper inside with 1.5"" hook & loop, pull side underneath moisture barrier for liner attachment - right side V-Fit -PLF004Z Thermoplastic zippers sewn vertically to thermal liner fly area. Pin side set on left, pull side set on right - V-Fit -TUP506P 1 pair 1/2"" x 8 1/2"" self fabric postman take-up straps, 2 bartacks each strap and 5/8"" postman slides. -TUP512 Self material fly take-up 1-703 hook, 1-dee ring attached with rivet and cap. -LGT000-BLK (Std) 2 Black Leather leg tabs per leg with non-logo female snaps. -KP214-BLK Black Poly coated aramid contoured knees with 2 layers Lite-N-Dri padding V-Fit. -PC504-BLK Black Poly-coated aramid pant cuffs and 3x3.5"" kick shield. -BHS059 2 PCA welts with self fabric folded over inside for reinforcement. 2 rows stitch on welt, with A-Frame Class II Harness. Closure clasp left. Anchor point right Available in Small (26-32), Medium (34-40), Large (42-50), and Extra Large (52-60) -BL042 2 Belt loops, 2 separate 1x3"" self fabric straps that close with 1 piece 1x2"" hook and 1 piece 1x2"" loop. Straps bartacked to shell. Set belt loops on side where welt is closest to center front. 1st loop set 3"" from the welt, 2nd loop set 3"" over from 1st loop. For A-Frame Class II Harness. -BL044 4 Belt loops, self fabric loops made with 2 separate 1x3"" straps with 1 piece 1x2"" loop and non logo female snap on one strap and 1 piece 1x2"" hook and 1 male snap on the other strap. All 4 loops set inside pant shell. 1 Belt loop bartacked 3"" over from seat seam on left side & 1 on right side. 1 Belt loop center of harness leg loop on left & right side. For A-Frame Class II Harness -BL045 1 Belt loop, 1.5x3.25"" Self fabric strap with 1 piece 1.5x1.5"" loop sewn to one end. Other end of strap bartacked at center of welt. 1 piece 1.5x1.5"" hook sewn to shell. For A-Frame Class II Harness -NO_LOOPS No Belt Loops -SR842X 42"" V-BACK quick adjust padded suspenders, 2"" Metal Loops - Red Note: The suspender length includes the 2.5"" snap tabs on the pants. -PMO210 Four 2"" wide self material suspender tabs with 1.75x2.5"" leather reinforcement. 2 male and 2 female logo snaps, attached to waist with 2 on the front and 2 on the back. Reinforced with 2 bartacks on each tab. PANT_POCKET Pant Pockets -FBP1002-ZO1 9x10x2"" Full Bellow Pocket w/ KEVLARr lined all 4 sides, (2) add layer of outer shell fabric lined with KEVLARr on shell side inside pocket, first layer 6.5"" high, second layer 4.5"" high, both layers stitched in 3"" increments to create 6 comp, 1 pc. 2x9"" loop on pocket, 3 pcs 1.5x3"" hook on flap. - Seattle Tool Pocket --- USE FBP1042 ON SMALLER SIZES. -PKTLOC-TL Thigh Left -FBP1089-ZO1 8.5x10x9x2.25"" Full Bellow Pocket with KEVLARr 3.5"" up inside pocket. 7.5x4"" Flap with 1x7.5"" hook. 1x7.5"" loop sewn to inside front top. 7x7"" PCA patch sewn to outside front, lined with KEVLARr and leather, with stitch to create two 3.5"" wide compartments. Vertical bartacks at the top corners and top center. 1 Piece 1x1"" loop at the top right front outside. 1x5.5"" self fabric strap with 1 piece 1x1"" hook on one end and 1x1"" loop on opposite side, same end. 10x9"" closure flap with top and bottom layer PCA; rounded bottom corners and cylinder of 6.5x1"" padding inside across bottom for hand grab. 7x2"" hook inside flap 1.5"" from bottom. 7x2"" loop horizontal on pocket 3.5"" below top. (not sewn through patch) -PKTLOC-TR Thigh Right -PMO542 ""Boot cut"" pant legs. -PTC4-3-RPY 3"" Yellow Diamond Reflexite Ventilated Reflective trim around leg bottoms- 4 rows lockstitch. 10   VENDOR MUST SIZE EACH FIREFIGHTER FOR PROPER FIT OF EACH JACKET/PANT 1 RESPONSE DATE (DEADLINE): 06/09/2022 at 11:00 AM. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. Please be advised that the Government will not pay for any information submitted under this announcement. The applicable North American Classification System (NAICS) Code for this requirement is 315220 (Men s and Boys Cut and Sew Apparel Manufacturing). Responses due are to be submitted by e-mail only to Wilmen.Joa@va.gov. Name of firm, Socio-Economic category of the firm is needed, capable (SDVOSB & VOSB) vendors should supply CVE Certification letter from Veterans Information Pages (VIP), along with complete address, phone & fax number of contacts.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/d27be6e0e15f411abc22bedaf7618edf/view)
 

Place of Performance

Address: Department of Veterans Affairs Montrose Campus FDR (Hudson Valley) 2094 Albany Post Road, Montrose, NY 10548-1454, USA

Zip Code: 10548-1454

Country: USA
 

Record

SN06347666-F 20220605/220603230101 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |