SOLICITATION NOTICE
T -- Blank Laser Rolls (Marginally Punched Continuous) paper and PFC 18"" wide pin fed 50"" in diameter 6"" core blank rolls of paper
- Notice Date
- 6/10/2022 8:37:08 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 323111
— Commercial Printing (except Screen and Books)
- Contracting Office
- Customer Services Washington DC 20401 USA
- ZIP Code
- 20401
- Solicitation Number
- BlankLaserRolls(MarginallyPunchedContinuous)Paper618-478and618-479(2022)
- Response Due
- 6/16/2022 8:00:00 AM
- Archive Date
- 07/01/2022
- Point of Contact
- Russ Ward, Phone: 7574907941
- E-Mail Address
-
wward@gpo.gov
(wward@gpo.gov)
- Description
- Both Jackets: Overall size is 18 x 50�. Forms are marginally punched with pin feed holes, left and right, that are 5/32� in diameter, 1/2� center to center. One set of two, 3/16� holes (1./2� center to center) left and right on sheet every 10-1/2�. No splice per roll is acceptable. TRIM: Roll size is 18� wide, 50� diameter, with a 6 core. Wind paper on hollow fiberboard cores flush with edges of paper. Cores to have approximately �� thick walls with a 6� inside diameter opening. Roll size shall be 50� diameter. Roll hardness profile must have a variance of less than 10 points. Each roll shall be marked on each side with an arrow indicating unwind direction. No tabs extending beyond edge of roll to mark impending end of roll.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/86eb37c69dd843dda26c9b3567cc7fa4/view)
- Record
- SN06354555-F 20220612/220610230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |