SOLICITATION NOTICE
T -- Envelopes
- Notice Date
- 6/14/2022 11:20:45 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 32311
—
- Contracting Office
- Customer Services Washington DC 20401 USA
- ZIP Code
- 20401
- Solicitation Number
- Envelopes-2022
- Response Due
- 6/21/2022 11:00:00 AM
- Archive Date
- 07/06/2022
- Point of Contact
- Alan Zada, Phone: 707748197066 ext. 6
- E-Mail Address
-
azada@gpo.gov
(azada@gpo.gov)
- Description
- 5,000,000 E-178 pistol style window envelopes, 9-3/4� x 4-3/8�, window for the E-�178 envelopes are multi-dimensional in shape, see attachment A. Window envelopes print in black ink�on face and back, head to head. Window: Windows shall have rounded or slightly rounded corners, shall be the size and location�specified on attachment A in this IFB, and shall comply with all applicable U.S. Postal Service�regulations. Window for the E- 178 envelopes are multi-dimensional in shape. The window shall be covered on the inside with a clear polystyrene window material glued securely�on all interior edges so as not to interfere with insertion of contents. The clear polystyrene�window material shall be free of conditions which would prevent being machine read by USPS and IRS�equipment. NOTE: All window covering material MUST BE TRANSPARENT. Window covering for E-178 envelopes must�have 1.5 mil thickness. Security tint: Security tint must be over entire inner envelope surface up to the gum line.�Contractor may use stock design (no proprietary design or company logos allowed) for security tint�but must guarantee that the product will ensure complete opacity and prevent show through of any�material contained therein. Envelope construction: Follow margins on the Government furnished specification sheets. Envelopes�with diagonal seams shall be sufficiently high cut so as to prevent the flap adhesive from�contacting the envelope contents. The sealed seams shall not adhere to the inside of the envelope.�The construction of the E-178 envelope will require a side scam with a McIntyre cut. Envelopes�shall be free from cuts, folds, tears, machine marks, foreign matter, dirt, ink smears, and�adhesive stains. Adhesive: All sealing flap adhesive shall be a water-activated type of such a consistency to�prevent premature sealing of the flap and curling of the envelope after drying. The flap adhesive shall be uniformly applied and have a minimum thickness of 0.015mm (0.0006 inch).�The flap shall be capable of being quickly and securely sealed using finger tips after moistening�the adhesive. SPLIT GUMMING IS NOT PERMITTED ON ANY ENVELOPE. When opened 15 to 20 seconds after sealing, the flap shall pull fibers from the body of the�envelope from not less than 75% of the adhesive area of the flap beyond the throat, up to a maximum�width of one-inch gum strip from the edge of the flap.Size of flap: Sealing flap must exceed the throat by at least 3/4"". �
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/908218ee34174187a1c59fef84f5fd85/view)
- Record
- SN06357507-F 20220616/220614230113 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |