Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 25, 2022 SAM #7512
SOLICITATION NOTICE

48 -- VALVE,AIR VENTING,S

Notice Date

6/23/2022 9:44:34 AM
 

Notice Type

Solicitation
 

NAICS

332919 — Other Metal Valve and Pipe Fitting Manufacturing
 

Contracting Office

NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
 

ZIP Code

17050-0788
 

Solicitation Number

N0010422QFF15
 

Response Due

7/8/2022 1:30:00 PM
 

Archive Date

07/23/2022
 

Point of Contact

Telephone: 7176053875
 

E-Mail Address

JILL.SABOL@NAVY.MIL
(JILL.SABOL@NAVY.MIL)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

CONTACT INFORMATION|4|N743.7|WVE|717-605-3875|jill.sabol@navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2022)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specification section C| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|x||x|||||| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|Material - Invoice & Receiving Report (COMBO) Certifications - Stand-Alone Receiving Report|Material - Inspection & Acceptance at SOURCE Certifications - Inspection at DESTINATION & Acceptance at OTHER |TBD|N 00104|TBD|Material-S4306A; Certifications-N39040|N50286|TBD|133.2|N/A|N/A|Certifications - N39040|N/A|N/A|See DD Form 1423|PORT_PTNH_WAWF_Notification@navy.mil| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|one year from the date of delivery |one year from the date of delivery ||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2020)|13|||||||||||||| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2022)|13|333414|500|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x| 1. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. 2. Any contract/order awarded as a result of this solicitation will be a ""DO"" rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS). See 52.211-14, Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use. 3. Offerors shall provide a Quality Assurance Manual. Only those sources with an acceptable Quality Assurance Manual are eligible for award under this solicitation. The Navy has found from past experience that Quality Control is essential to assure personnel safety in critical areas and to provide for the safe operation of submarines and certain systems on surface ships. If an offeror's Quality Assurance Manual was not previously approved, review of an offeror's Quality Assurance Manual will be accomplished as part of the technical evaluation. The Level I/Subsafe/Deep Submergence Systems-Scope of Certification (DSS-SOC)/Fly-by-Wire Programs require offerors to have a Quality System that meets the requirements of MIL-I-45208, MIL-Q-9858, or ISO 9001:2000. As part of this Quality System, the offeror's calibration system must meet the requirements of MIL-STD-45662A, ANSI/NCSL-Z540.3-2006, or ISO 10012-1. An offeror whose Quality Assurance Manual HAS NOT previously been found acceptable by NAVSUP WSS must submit a copy of their current Quality Assurance Manual to Jill Sabol at jill.l.sabol.civ@us.navy.mil. If you do not receive a response, please contact Tiana Hammaker at tiana.k.hammaker.civ@us.navy.mil. 4. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications) related to the instant procurement are considered to be ""issued"" by the Government when copies are either deposited inthe mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to ""issue"" contractual documents as detailed herein. 5. NAVSUP WSS Mech will be considering past performance in the evaluation of offers. 6. If drawings are included in the solicitation, access needs to be requested on the individual solicitation page on Contract Opportunities via the Government's SAM.gov website. Include your CAGE code in your request. 8. Submission of ALL DD form 1423 certification data (CDRLs) will be on or before 20 days prior to the material (line item 0001AA) delivery date. PNSY review/acceptance of CDRLs shall be 6 working days after receipt of CDRLs. Final delivery of material will be on or before 270 days after the effective date of the contract. \ 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.2.1 Specification Revisions - The specification revisions listed under ""Documents References"" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.2.2 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2.3 Documents, drawings, and publications supplied are listed under ""Drawing Number"". These items should be retained until an award is made. DRAWING DATA=7067139 |53711| A| |D|0000.A | A|49998|0040944 DRAWING DATA=7067139 |53711| A| |D|0001 | A|49998|0076964 DRAWING DATA=7067139 |53711| A| |D|0002.1 | A|49998|0074701 DRAWING DATA=7067139 |53711| A| |D|0002.2 | A|49998|0073253 DRAWING DATA=7067139 |53711| A| |D|0003 | A|49998|0010610 DRAWING DATA=7067139 |53711| A| |D|0004 | A|49998|0011857 DRAWING DATA=7067139 |53711| A| |D|0005 | A|49998|0037631 DRAWING DATA=7067139 |53711| A| |D|0006.1 | A|49998|0065293 DRAWING DATA=7067139 |53711| A| |D|0006.10 | A|49998|0055674 DRAWING DATA=7067139 |53711| A| |D|0006.11 | A|49998|0041730 DRAWING DATA=7067139 |53711| A| |D|0006.2 | A|49998|0063979 DRAWING DATA=7067139 |53711| A| |D|0006.3 | A|49998|0072396 DRAWING DATA=7067139 |53711| A| |D|0006.4 | A|49998|0063051 DRAWING DATA=7067139 |53711| A| |D|0006.5 | A|49998|0053940 DRAWING DATA=7067139 |53711| A| |D|0006.6 | A|49998|0067812 DRAWING DATA=7067139 |53711| A| |D|0006.7 | A|49998|0063371 DRAWING DATA=7067139 |53711| A| |D|0006.8 | A|49998|0051414 DRAWING DATA=7067139 |53711| A| |D|0006.9 | A|49998|0035153 DRAWING DATA=7067139 |53711| A| |D|0007.1 | A|49998|0025513 DRAWING DATA=7067139 |53711| A| |D|0007.10 | A|49998|0042834 DRAWING DATA=7067139 |53711| A| |D|0007.11 | A|49998|0042258 DRAWING DATA=7067139 |53711| A| |D|0007.12 | A|49998|0039131 DRAWING DATA=7067139 |53711| A| |D|0007.13 | A|49998|0037163 DRAWING DATA=7067139 |53711| A| |D|0007.14 | A|49998|0047485 DRAWING DATA=7067139 |53711| A| |D|0007.15 | A|49998|0044231 DRAWING DATA=7067139 |53711| A| |D|0007.16 | A|49998|0042690 DRAWING DATA=7067139 |53711| A| |D|0007.17 | A|49998|0039920 DRAWING DATA=7067139 |53711| A| |D|0007.18 | A|49998|0045068 DRAWING DATA=7067139 |53711| A| |D|0007.19 | A|49998|0046147 DRAWING DATA=7067139 |53711| A| |D|0007.2 | A|49998|0044896 DRAWING DATA=7067139 |53711| A| |D|0007.20 | A|49998|0037608 DRAWING DATA=7067139 |53711| A| |D|0007.21 | A|49998|0039811 DRAWING DATA=7067139 |53711| A| |D|0007.22 | A|49998|0038182 DRAWING DATA=7067139 |53711| A| |D|0007.23 | A|49998|0040300 DRAWING DATA=7067139 |53711| A| |D|0007.24 | A|49998|0037963 DRAWING DATA=7067139 |53711| A| |D|0007.25 | A|49998|0039331 DRAWING DATA=7067139 |53711| A| |D|0007.26 | A|49998|0038445 DRAWING DATA=7067139 |53711| A| |D|0007.27 | A|49998|0038194 DRAWING DATA=7067139 |53711| A| |D|0007.28 | A|49998|0040194 DRAWING DATA=7067139 |53711| A| |D|0007.29 | A|49998|0036944 DRAWING DATA=7067139 |53711| A| |D|0007.3 | A|49998|0051936 DRAWING DATA=7067139 |53711| A| |D|0007.30 | A|49998|0039343 DRAWING DATA=7067139 |53711| A| |D|0007.31 | A|49998|0035664 DRAWING DATA=7067139 |53711| A| |D|0007.32 | A|49998|0046989 DRAWING DATA=7067139 |53711| A| |D|0007.33 | A|49998|0046438 DRAWING DATA=7067139 |53711| A| |D|0007.34 | A|49998|0037472 DRAWING DATA=7067139 |53711| A| |D|0007.4 | A|49998|0049700 DRAWING DATA=7067139 |53711| A| |D|0007.5 | A|49998|0050294 DRAWING DATA=7067139 |53711| A| |D|0007.6 | A|49998|0036826 DRAWING DATA=7067139 |53711| A| |D|0007.7 | A|49998|0037112 DRAWING DATA=7067139 |53711| A| |D|0007.8 | A|49998|0039614 DRAWING DATA=7067139 |53711| A| |D|0007.9 | A|49998|0037624 DRAWING DATA=7067139 |53711| A| |D|0008.1 | A|49998|0029062 DRAWING DATA=7067139 |53711| A| |D|0008.10 | A|49998|0059563 DRAWING DATA=7067139 |53711| A| |D|0008.11 | A|49998|0053044 DRAWING DATA=7067139 |53711| A| |D|0008.12 | A|49998|0053321 DRAWING DATA=7067139 |53711| A| |D|0008.13 | A|49998|0055864 DRAWING DATA=7067139 |53711| A| |D|0008.14 | A|49998|0060067 DRAWING DATA=7067139 |53711| A| |D|0008.15 | A|49998|0054451 DRAWING DATA=7067139 |53711| A| |D|0008.16 | A|49998|0054269 DRAWING DATA=7067139 |53711| A| |D|0008.17 | A|49998|0042852 DRAWING DATA=7067139 |53711| A| |D|0008.18 | A|49998|0027366 DRAWING DATA=7067139 |53711| A| |D|0008.19 | A|49998|0030712 DRAWING DATA=7067139 |53711| A| |D|0008.2 | A|49998|0053673 DRAWING DATA=7067139 |53711| A| |D|0008.20 | A|49998|0022804 DRAWING DATA=7067139 |53711| A| |D|0008.21 | A|49998|0015350 DRAWING DATA=7067139 |53711| A| |D|0008.3 | A|49998|0055587 DRAWING DATA=7067139 |53711| A| |D|0008.4 | A|49998|0055553 DRAWING DATA=7067139 |53711| A| |D|0008.5 | A|49998|0052736 DRAWING DATA=7067139 |53711| A| |D|0008.6 | A|49998|0055381 DRAWING DATA=7067139 |53711| A| |D|0008.7 | A|49998|0057369 DRAWING DATA=7067139 |53711| A| |D|0008.8 | A|49998|0055284 DRAWING DATA=7067139 |53711| A| |D|0008.9 | A|49998|0057020 DRAWING DATA=7067139 |53711| A| |D|0009.1 | A|49998|0063687 DRAWING DATA=7067139 |53711| A| |D|0009.2 | A|49998|0059057 DRAWING DATA=7067139 |53711| A| |D|0009.3 | A|49998|0044626 DRAWING DATA=7067139 |53711| A| |D|0010 | A|49998|0117867 DRAWING DATA=7067139 |53711| A| |D|0011 | A|49998|0157313 DRAWING DATA=7067139 |53711| A| |D|0012 | A|49998|0119922 DRAWING DATA=7067139 |53711| A| |D|0013 | A|49998|0122420 DRAWING DATA=7067139 |53711| A| |D|0014 | A|49998|0132076 DRAWING DATA=7067139 |53711| A| |D|0015 | A|49998|0184799 DRAWING DATA=7067139 |53711| A| |D|0016 | A|49998|0087318 DRAWING DATA=7067139 |53711| A| |D|0017 | A|49998|0105811 DRAWING DATA=7067139 |53711| A| |D|0018 | A|49998|0132827 DRAWING DATA=7067139 |53711| A| |D|0019 | A|49998|0149851 DRAWING DATA=7067139 |53711| A| |D|0020 | A|49998|0152048 DRAWING DATA=7067139 |53711| A| |D|0021 | A|49998|0142783 DRAWING DATA=7067139 |53711| A| |D|0022 | A|49998|0065583 DRAWING DATA=7067139 |53711| A| |D|0023 | A|49998|0076185 DRAWING DATA=7067139 |53711| A| |D|0024 | A|49998|0192952 DRAWING DATA=7067139 |53711| A| |D|0025 | A|49998|0071051 DRAWING DATA=7067139 |53711| A| |D|0026 | A|49998|0063496 DRAWING DATA=7067139 |53711| A| |D|0027 | A|49998|0155625 DRAWING DATA=7067139 |53711| A| |D|0028 | A|49998|0138162 DRAWING DATA=7067139 |53711| A| |D|0029 | A|49998|0154471 DRAWING DATA=7067139 |53711| A| |D|0030 | A|49998|0211519 DRAWING DATA=7067139 |53711| A| |D|0031 | A|49998|0068775 DRAWING DATA=7067139 |53711| A| |D|0032 | A|49998|0100673 DRAWING DATA=7067139 |53711| A| |D|0033 | A|49998|0127612 DRAWING DATA=7067139 |53711| A| |D|0034 | A|49998|0029135 DRAWING DATA=7067139 |53711| A| |D|0035 | A|49998|0141735 DRAWING DATA=7067139 |53711| A| |D|0036 | A|49998|0090408 DRAWING DATA=7067139 |53711| A| |D|0037 | A|49998|0143149 DRAWING DATA=7067139 |53711| A| |D|0038 | A|49998|0127564 DRAWING DATA=7067139 |53711| A| |D|0039 | A|49998|0172047 DRAWING DATA=7067139 |53711| A| |D|0040 | A|49998|0085162 DRAWING DATA=7067139 |53711| A| |D|0041 | A|49998|0084083 DRAWING DATA=7067139 |53711| A| |D|0042 | A|49998|0055855 DRAWING DATA=7067139 |53711| A| |D|0043 | A|49998|0053156 DRAWING DATA=7067139 |53711| A| |D|0044 | A|49998|0108888 DRAWING DATA=7067139 |53711| A| |D|0045 | A|49998|0151364 DRAWING DATA=7067139 |53711| A| |D|0046 | A|49998|0076502 DRAWING DATA=7067139 |53711| A| |D|0047 | A|49998|0087391 DRAWING DATA=7067139 |53711| A| |D|0048 | A|49998|0056573 DRAWING DATA=7067139 |53711| A| |D|0049 | A|49998|0177031 DRAWING DATA=7067139 |53711| A| |D|0050 | A|49998|0062223 DRAWING DATA=7067139 |53711| A| |D|0051 | A|49998|0043066 DRAWING DATA=7067139 |53711| A| |D|0052 | A|49998|0121214 DRAWING DATA=7067139 |53711| A| |D|0053 | A|49998|0147431 DRAWING DATA=7067139 |53711| A| |D|0054 | A|49998|0089191 DRAWING DATA=7067139 |53711| A| |D|0055 | A|49998|0069061 DRAWING DATA=7067139 |53711| A| |D|0056 | A|49998|0088517 DOCUMENT REF DATA=FED-STD-H28 | | |B |190424|A| | | DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01| DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A| 2| | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A| 1| | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01| DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 ;Vent valve body to be in accordance with Naval ship system Command drawing 7067139 part number 16, except as amplified or modified herein.; 3.2 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Valve, Vent Body; Material - ;QQ-N-281, CL A, FORM 1, Cold drawn; 3.3 Welding or Brazing - When welding, brazing, and allied processes are required, as invoked by Section C paragraph 3 requirements, they must be in accordance with S9074-AR-GIB-010A/278, 0900-LP-001-7000 for brazing of piping and pressure vessel applications, or S9074-AQ-GIB-010/248 for brazing of other applications. For all production and repair welding and brazing personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable. Procedures and Qualification Data must be submitted for review and approval prior to performing any welding or brazing. 3.4 Thread Inspection Requirements - All threads on threaded parts must be inspected using appropriate inspection methods, inspection systems, and inspection gages/instruments in accordance with FED-STD-H28 series. Substitution of thecommercial equivalent inspection in accordance with ASME B1 series is acceptable. 3.4.1 System 21 of FED-STD-H28/20 must be used as a minimum inspection requirement for threads when the design drawing or design specification does not specify an inspection requirement. 3.4.2 For Navy and Shipyard drawings, system 21 of FED-STD-H28/20 may be substituted for System 22 without further Navy approval when the design drawing invokes System 22 and does not cite governing specifications that specifically require system 22. System 22 of FED-STD-H28/20 must be used when the drawing references other governing specifications that specifically require System 22, such as certain thread types of MIL-DTL-1222. 3.4.3 A written request for concurrence must be submitted when utilizing alternative measuring equipment or measuring systems not applicable to the specified inspection system. 3.5 Internal Threads - All internal threads must be formed by cutting. Cold forming of internal threads is not acceptable. 3.6 O-ring grooves and mating sealing surfaces must be inspected per the contractually invoked drawings or specifications. When the drawings or specifications do not provide specific defect criteria or state that no defects are allowed, the General Acceptance Criteria (GAC) standard must be used for inspecting O-ring grooves and mating sealing surfaces only. Repairs to sealing surfaces and O-ring grooves with unacceptable defects may be accomplished within the limits of the size and tolerances provided in the applicable drawing. Repairs thatwould exceed these limits require approval (including final dimensions). The data that is red lined (crossed out) is excluded from the GAC for this contract and is not to be used for acceptance or rejection criteria. The GAC document is identified as Contract Support Library Reference Number CSD008 at https://register.nslc.navy.mil/ 3.7 NAVSEA 0948-LP-045-7010 - Any applicable requirements of NAVSHIPS 4410.17,NAVSEA 0948-LP-045-7010, or 0948-045-7010 which the contractor must meet are included in this contract/purchase order. The above documents are for GovernmentUse Only. Further application of the above documents is prohibited.prohibited. 3.7.1 Marking of material with a Material Designator per the Drawing is also prohibited, with the exception of Fasteners. Fasteners must be marked with a Material Symbol/Designator as specified elsewhere in this contract. 3.8 Certificate of Compliance - (SPECIAL EMPHASIS MATERIAL) The Contractor must prepare and submit a certificate of compliance certifying that the items/components furnished under this contract comply with the requirements of the procurement document, including any/all invoked specifications and drawings. 3.9 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order. 3.9.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR. Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance. 3.9.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted using the ECDS (Electronic Contractor Data Submission) system at https://register.nslc.navy.mil/ 3.9.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change classification (Class I or Class II), and change justification. b. A complete description of the change to be made and the need for that change. c. A complete listing of other Configuration Items impacted by the proposed change and a description of the impact on those CIs. d. Proposed changes to documents controlled by the Government. e. Proposed serial/lot number effectivities of units to be produced in, or retrofitted to, the proposed configuration. f. Recommendations about the way a retrofit should be accomplished. g. Impacts to any logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel in support of the product. h. Impacts to the operational use of the product. i. Complete estimated life-cycle cost impact of the proposed change. j. Milestones relating to the processing and implementation of the engineering change. 3.10 Mercury Free - Mercury and mercury containing compounds must not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Mercury contamination of the material will be cause for rejection. ^ QUALITY ASSURANCE REQUIREMENTS ^ 3.11 Quality System Requirements - The Contractor furnishing items under this contract/purchase order must provide and maintain a quality system in accordance with ISO-9001 as amplified or modified herein, with the calibration system requirements of ISO-10012 or ANSI-Z540.3 with ISO-17025. A Quality System in accordance with MIL-I-45208, with the calibration system requirements of MIL-STD-4 3.11.1 The Contractor's quality system and products supplied under the system are subject to evaluation, verification inspection, and acceptance/nonacceptance by the Government representative to determine the system's effectiveness in meeting the quality requirements established in the Contract/Purchase Order. 3.11.2 The Contractor's quality system must be documented and must be available for review by the Contracting Officer or his representative prior to initiation of production and throughout the life of the contract. The Prime Contractor must, upon notification, make his facilities available for audit by the contracting Officer or his authorized representative. 3.11.3 See CDRL DI-QCIC-81110 (Inspection System Procedures) - All suppliers of Level I/SUBSAFE (LI/SS) material are required to submit a copy of their current documented quality system procedures to the Procurement Contracting Officer (PCO) prior to award of any contract/purchase order. Suppliers that have a copy of their current quality system procedures on file at the Procuring Activity may request the PCO waive this requirement. 3.11.4 This contract provides for the performance of Government Quality Assurance at source. The place or places of performance may not be changed without the authorization of the Procurement Contracting Officer. Upon receipt of this order, promptly notify the Government representative who normally services your plant so that appropriate planning for Government inspection can be accomplished. If you do not have an assigned Government representative, notify the nearest Defense Contract Management Agency (DCMA) Office. In the event that a local Government representative or DCMA Office cannot be located, our purchasing agent should be notified immediately. 3.11.5 Any changes made by the Contractor to a qualified quality system will require re-submittal to the PCO and concurrence by the Government Quality Assurance Representative prior to adoption. 3.12 Contractor Inspection Requirements - The Contractor must maintain adequate records of all inspections and tests. The records must indicate the nature and number of observations made, the number and type of deficiencies found, the quantities approved and rejected and the nature of corrective action taken as appropriate. Inspection records must be traceable to the material inspected. 3.12.1 The supplier's gages, measuring and test equipment must be made available for use by the Government representative when required to determine conformance with Contract requirements. When conditions warrant, the supplier's personnel must be made available for operations of such devices and for verification of their accuracy and condition. 3.12.2 All documents and reference data applicable to this contract must be available for review by the Government representative. Copies of documents required for Government inspection purposes must be furnished in accordance with the instructions provided by the Government representative. 3.13 Subcontractor Inspection Requirements - The Government has the right to inspect at source, any supplies or services that were not manufactured or performed within the contractor's facility. Such inspection can only be requested by or under authorization of the Government representative. Any purchasing documents to a subcontractor must cite the applicable portions of the contractually invoked quality system (e.g. calibration requirements), plus any product requirements that apply to the supplies being purchased. When the Government elects to perform source inspection at the subcontractor's facility, applicable purchase documents must be annotated with the following statement: ""A Government inspection is required prior to shipment from your plant. Upon receipt of this order, promptly notify the Government representative who normally services your plant so that appropriate planning for Government inspection can be accomplished. If you do not have an assigned Government representative, notify the nearest Defense Contract Management Agency (DCMA) Office. In the event that a local Government representative or DCMA Office cannot be located, our purchasing agent should be notified immediately."" 3.13.1 The prime contractor's program must include procedures to assess the capability of the prospective suppliers to produce the products or supply the services in accordance with the contract, prior to the issuance of any purchase document. 3.13.2 Each sub-tier supplier of material or services for items in Section 3 of this contract must be subjected to a periodic review or audit by the Prime to determine the continued capability of the supplier to control the quality of the products or services specified in the purchase order or contract. 3.13.3 The prime contractor must ensure that the purchased product conformsto specified purchase requirements and this contract. The type and extent of control applied to the supplier and the purchased product must be dependent upon the effect of the purchased product on the end item represented by this contract. 3.13.4 The prime contractor must evaluate the requirements of the contractand select suppliers based on their ability to supply the product in accordance with the prime contractor's requirements and the contract. Criteria for selection and evaluation must be established. Records of this effort must be available for review by the government. 3.13.5 The prime contractor's supplier quality assurance program must provide for a review of purchase documents to assure applicable quality requirements are included or referenced in the documentation for compliance by the supplier. 3.14 Government Furnished Material and/or Equipment (GFM/GFE) - When material or equipment is furnished by the Government, the Contractor must develop documented control procedures that require at least the following: 3.14.1 Visual examination upon receipt to detect damage during transit. 3.14.2 Inspection for completeness and proper type. 3.14.3 Verification of material quality received. 3.14.4 Periodic inspection and precautions to assure adequate storage conditions and to guard against damage from handling and deterioration during storage. 3.14.5 Functional testing, either prior to or after installation, or both, as required by the Contract to determine satisfactory operation. 3.14.6 Identification and protection from improper use or disposition. 3.14.7 Reporting to the Government, any GFM or GFE property found damaged, malfunctioning, or otherwise unsuitable for use. In the event of damage or malfunction during or after installation, the supplier must determine and record probable cause and necessity for withholding the material from use. 3.14.8 For GFE material, and as required by the terms of the bailment agreement, the supplier must establish procedures for adequate storage, maintenance, and inspection of bailed Government material. Records of all inspection and maintenance performed on bailed property must be maintained. 3.14.9 Material returned to the contractor must be handled as GFM. 3.15 Traceability and Certification Requirements - To assure that correct materials are installed in Level I/SUBSAFE systems, it is imperative that traceability be maintained from the material to the material certification test report and other required Objective Quality Evidence (OQE). The material certification report must completely and accurately reflect that the material supplied meets the specified requirements. Materials requiring Traceability and Certification Data are identified within Paragraph 3, Section C of this contract/purchase order. 3.15.1 The following provides the minimum requirements for maintaining material traceability and supplements the requirements specified in DI-MISC-81020 and elsewhere in the contract/purchase order. The Contractor must develop written procedures that implement the material control requirements stated herein and elsewhere in this Contract/Purchase Order. 3.16 Material Traceability - The certification data report must be identified through a unique traceability number, heat-lot number, or heat-treat number, as applicable, which must also be marked on the material. This traceability marking on the material must provide direct traceability to the material's chemical composition and mechanical properties certification data. For material produced by batch, continuous cast, or continuous pour processes, samples must be taken no less than once in every eight hours of operation for the purpose of validating proper chemical composition and mechanical properties. Traceability must be maintained through all process operations including any subcontracted operations, to the finished component. 3.16.1 Material Marking for Traceability and Identification - The following are the minimum marking requirements. Additional/alternate marking requirements, if applicable, will be specified elsewhere in the contract/purchase order. In addition to the marking requirements on applicable drawings and/or specifications, marking for traceability is required. All traceability markings must be permanently applied in accordance with MIL-STD-792 (except as specified below). An alternate marking method is permissible provided it is an available option in the contractually invoked specification or drawing, except in instances where the material has been modified by this contract/purchase order and differs from that specified in the specification or drawing. 3.16.2 Traceability markings for items with precision machined or plated surfaces, or material with suitable marking surface areas less than 3/8 inches square (either 3/8"" x 3/8"" or an area equal to 0.1406 inches square) must be applied to a durable tag and the tag securely affixed to the material. 3.16.3 Marking must be legible and must be located so as to not affect the form, fit, and function of the material. ; ; 3.17 See CDRL DI-MISC-81020 (Chemical and Mechanical) - Material Certification - In addition to the certification data requir...
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/f3e3198bc6394ff394385a15a5c09faf/view)
 

Record

SN06367308-F 20220625/220623230123 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |