Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JULY 02, 2022 SAM #7519
SOLICITATION NOTICE

48 -- 48--VALVE,BALL, IN REPAIR/MODIFICATION OF

Notice Date

6/30/2022 12:50:12 AM
 

Notice Type

Solicitation
 

NAICS

333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
 

Contracting Office

NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
 

ZIP Code

17050-0788
 

Solicitation Number

N0010422QZB82
 

Response Due

7/31/2022 10:00:00 PM
 

Archive Date

08/16/2022
 

Point of Contact

Telephone: 7176057562
 

E-Mail Address

AMANDA.SWIGONSKI@NAVY.MIL
(AMANDA.SWIGONSKI@NAVY.MIL)
 

Description

CONTACT INFORMATION|4|N742.4|WV2|(717) 605-7562|amanda.a.swigonski.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2022)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|see specification sections C & E | INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|X||X|||||| INSPECTION/ACCEPTANCE POINT|6||||||| REPAIR DELIVERY (FIRM FIXED PRICE)|1|90| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|Material - Invoice & Receiving Report (COMBO) Certifications - Stand-Alone Receiving Report|Material - Inspection & Acceptance at SOURCE Certifications - Inspection at DESTINATION & Accept ance at OTHER |TBD|N00104|TBD|Material-S4306A; Certifications-N39040|N50286|TBD|Code 133.2|N/A|N/A|Certifications-N39040|N/A|N/A|See DD Form 1423|PORT_PTNH_WAWF_Notification@navy.mil| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| FIRM FIXED PRICE REPAIR PURCHASE ORDERS|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|one year from date of delivery|one year from date of delivery ||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| BUY AMERICAN --FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM - BASIC(DEVIATION 2020-O0019) (MAR 2022))|3|||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2020)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE (DEVIATION 2020-O0019) (JUL 2020))|3|||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2014)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2022)|13|332911|750 (# of employees)|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| 1. This is a limited competitive repair requirement. This part requiresengineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability,engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government. 2. The resultant award of this solicitation shall be issued bilaterally,requiring the contractors written acceptance prior to execution. 3. The following proposed delivery schedule applies: Submission of Certification Data CDRLs will be on or before 20 days prior toscheduled delivery. PNSY review/acceptance of Certification CDRLs 6 workingdays after receipt of Certification DD 1423 CDRLs. Final delivery of material shall be on or before 250 days after the effective date of the resulting contract. 4. Drawings associated with this solicitation will be made available athttps://sam.gov/content/home. Drawings have restricted access which needs to be approved. Once access hasbeen requested, interested vendors should email the POC listed on thesolicitation to inform them of the request. 5. All transportation to/from the repair site will be paid for by the US Navy. 6. The contract shall comply with the Comercial Asset Visibility (CAV) of theasset(s) in the order in accordance with NAVSUPWSSFA24. 7. Offers shall be submitted as Firm Fixed Price for the full repair effortbased on the Repair Instruction or SOW. Please include the following: a. Teardown and Evaluation rate: b. RTAT: c. Throughput Constraint: d. Induction Expiration Date: A cost of new price shall also be provided in addition to the repair price. 8. All contractual documents (i.e. contracts, purchase orders, task orders,delivery orders, and modifications) related to the instant repair areconsidered to be ""issued"" by the Government when copies are either deposited in the mail, transmitted by facsimile, or send by other electronic commercemethods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to ""issue"" contractual details as detailed herein. 9. Any contract/order awarded as a result of this solicitation will be a ""DO""rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS). See 52.211-14, Notice of Priority Rating forNational Defense, Emergency Preparedness, and Energy Program Use. 10. When submitting offers, make sure to specify any exceptions, i.e. MIL-STDpackaging, MIL-STD labeling, inspection and acceptance locations, packaginghouses, surplus material, etc. If no exceptions are indicated or received,award will be issued upon the solicitation requirements. Changes or requestsfor changes after award will require consideration costs deducted from the unit price. 11. If supplies will be packaged at a location different from the offeroraddress, the offeror shall provide the name, street address, and cage code ofthe packaging facility. 12. This is a Level 1 Repair. 13. This requirement requires access to classified drawings. These drawings are not required to submit a quote, however, in the event of an award, a facility clearance may be required in accordance with FAR 52.204-2. \ 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Identification of Classified Documents - This contract/purchase order requires the Contractor to have authorized access to classified documents in accordance with the attached Contract Security Classification Specification (DD Form 254). The classified documents and security level are: ;6984058 - CONFIDENTIAL; 2.3 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.3.1 Specification Revisions - The specification revisions listed under ""Documents References"" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.3.2 Documents, drawings, and publications supplied are listed under ""Drawing Number"". These items should be retained until an award is made. 2.3.3 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. DRAWING DATA=26M65-0001H1 |53711| A|ER |D|0001 | |49998|1019235 DRAWING DATA=26M65-0001H2 |53711| A|ER |D|0001 | |49998|1070271 DRAWING DATA=26M65-0003G01 |53711| A|ER |D|0001 | A|49998|0305523 DRAWING DATA=2621-827-05 |96169| Z| |D|0001 | Z|49998|0084952 DRAWING DATA=2621-827-05 |96169| Z| |D|0001.1 | R|49998|0128957 DRAWING DATA=2621-827-05 |96169| Z| |D|0001.2 | F|49998|0085426 DRAWING DATA=2621-827-05 |96169| Z| |D|0001.3 | K|49998|0065651 DRAWING DATA=2621-827-05 |96169| Z| |D|0001.4 | K|49998|0060834 DRAWING DATA=2621-827-05 |96169| Z| |D|0002 | G|49998|0106348 DRAWING DATA=2621-827-05 |96169| Z| |D|0002.1 | M|49998|0092018 DRAWING DATA=2621-827-05 |96169| Z| |D|0002.2 | S|49998|0095871 DRAWING DATA=2621-827-05 |96169| Z| |D|0002.3 | S|49998|0081542 DRAWING DATA=2621-827-05 |96169| Z| |D|0002.4 | W|49998|0089226 DRAWING DATA=2621-827-05 |96169| Z| |D|0002.5 | Z|49998|0055086 DRAWING DATA=2621-827-05 |96169| Z| |D|0003 | Z|49998|0063398 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.1 | Y|49998|0067198 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.2 | Z|49998|0067997 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.3 | Y|49998|0066584 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.4 | Y|49998|0064848 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.5 | Y|49998|0079962 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.6 | Y|49998|0076925 DRAWING DATA=2621-827-05 |96169| Z| |D|0003.7 | Y|49998|0070166 DRAWING DATA=2621-827-05 |96169| Z| |D|0004 | S|49998|0048401 DRAWING DATA=2621-827-05 |96169| Z| |D|0004.1 | -|49998|0025321 DRAWING DATA=2621-827-05 |96169| Z| |D|0005 | K|49998|0053776 DRAWING DATA=2621-827-05 |96169| Z| |D|0005.1 | V|49998|0060374 DRAWING DATA=2621-827-05 |96169| Z| |D|0005.2 | Y|49998|0027296 DRAWING DATA=2621-827-05 |96169| Z| |D|0006 | S|49998|0060610 DRAWING DATA=2621-827-05 |96169| Z| |D|0007 | S|49998|0041136 DRAWING DATA=2621-827-05 |96169| Z| |D|0008 | Y|49998|0039834 DRAWING DATA=2621-827-05 |96169| Z| |D|0009 | S|49998|0059200 DRAWING DATA=2621-827-05 |96169| Z| |D|0010 | Y|49998|0058071 DRAWING DATA=2621-827-05 |96169| Z| |D|0011 | Y|49998|0056970 DRAWING DATA=2621-827-05 |96169| Z| |D|0012 | S|49998|0066586 DRAWING DATA=2621-827-05 |96169| Z| |D|0013 | Y|49998|0054369 DRAWING DATA=2621-827-05 |96169| Z| |D|0014 | S|49998|0064858 DRAWING DATA=2621-827-05 |96169| Z| |D|0015 | Y|49998|0058810 DRAWING DATA=2621-827-05 |96169| Z| |D|0016 | S|49998|0071905 DRAWING DATA=2621-827-05 |96169| Z| |D|0017 | Y|49998|0059666 DRAWING DATA=2621-827-05 |96169| Z| |D|0018 | S|49998|0066131 DRAWING DATA=2621-827-05 |96169| Z| |D|0019 | Y|49998|0057395 DRAWING DATA=2621-827-05 |96169| Z| |D|0020 | S|49998|0067369 DRAWING DATA=2621-827-05 |96169| Z| |D|0021 | S|49998|0055130 DRAWING DATA=2621-827-05 |96169| Z| |D|0022 | S|49998|0065016 DRAWING DATA=2621-827-05 |96169| Z| |D|0023 | S|49998|0053767 DRAWING DATA=2621-827-05 |96169| Z| |D|0024 | S|49998|0065323 DRAWING DATA=2621-827-05 |96169| Z| |D|0025 | S|49998|0055766 DRAWING DATA=2621-827-05 |96169| Z| |D|0026 | S|49998|0059448 DRAWING DATA=2621-827-05 |96169| Z| |D|0027 | S|49998|0057058 DRAWING DATA=2621-827-05 |96169| Z| |D|0028 | S|49998|0061864 DRAWING DATA=2621-827-05 |96169| Z| |D|0029 | S|49998|0053281 DRAWING DATA=2621-827-05 |96169| Z| |D|0030 | S|49998|0060324 DRAWING DATA=2621-827-05 |96169| Z| |D|0031 | S|49998|0058247 DRAWING DATA=2621-827-05 |96169| Z| |D|0032 | S|49998|0062873 DRAWING DATA=2621-827-05 |96169| Z| |D|0033 | S|49998|0057650 DRAWING DATA=2621-827-05 |96169| Z| |D|0034 | S|49998|0055350 DRAWING DATA=2621-827-05 |96169| Z| |D|0035 | S|49998|0060054 DRAWING DATA=2621-827-05 |96169| Z| |D|0036 | S|49998|0055453 DRAWING DATA=2621-827-05 |96169| Z| |D|0037 | S|49998|0064849 DRAWING DATA=2621-827-05 |96169| Z| |D|0038 | S|49998|0061317 DRAWING DATA=2621-827-05 |96169| Z| |D|0039 | S|49998|0059979 DRAWING DATA=2621-827-05 |96169| Z| |D|0040 | S|49998|0055085 DRAWING DATA=2621-827-05 |96169| Z| |D|0041 | S|49998|0059777 DRAWING DATA=2621-827-05 |96169| Z| |D|0042 | S|49998|0064415 DRAWING DATA=2621-827-05 |96169| Z| |D|0043 | S|49998|0054373 DRAWING DATA=2621-827-05 |96169| Z| |D|0044 | S|49998|0063720 DRAWING DATA=2621-827-05 |96169| Z| |D|0045 | Y|49998|0042014 DRAWING DATA=2621-827-05 |96169| Z| |D|0046 | S|49998|0037116 DRAWING DATA=2621-827-05 |96169| Z| |D|0047 | S|49998|0062462 DRAWING DATA=2621-827-05 |96169| Z| |D|0048 | S|49998|0048850 DRAWING DATA=2621-827-05 |96169| Z| |D|0049 | S|49998|0060197 DRAWING DATA=2621-827-05 |96169| Z| |D|0050 | S|49998|0060339 DRAWING DATA=2621-827-05 |96169| Z| |D|0053 | S|49998|0062094 DRAWING DATA=2621-827-05 |96169| Z| |D|0054 | S|49998|0059958 DRAWING DATA=2621-827-05 |96169| Z| |D|0055 | S|49998|0063494 DRAWING DATA=2621-827-05 |96169| Z| |D|0056 | S|49998|0052507 DRAWING DATA=2621-827-05 |96169| Z| |D|0057 | Z|49998|0068242 DRAWING DATA=2621-827-05 |96169| Z| |D|0058 | T|49998|0050412 DRAWING DATA=2621-827-05 |96169| Z| |D|0059 | T|49998|0050917 DRAWING DATA=2621-827-05 |96169| Z| |D|0060 | Z|49998|0059741 DRAWING DATA=2621-827-05 |96169| Z| |D|0061 | Y|49998|0053238 DRAWING DATA=2621-827-05 |96169| Z| |D|0062 | S|49998|0063287 DRAWING DATA=2621-827-05 |96169| Z| |D|0063 | Y|49998|0054203 DRAWING DATA=2621-827-05 |96169| Z| |D|0064 | S|49998|0065654 DRAWING DATA=2621-827-05 |96169| Z| |D|0065 | Y|49998|0053205 DRAWING DATA=2621-827-05 |96169| Z| |D|0066 | S|49998|0060606 DRAWING DATA=2621-827-05 |96169| Z| |D|0067 | S|49998|0054952 DRAWING DATA=2621-827-05 |96169| Z| |D|0068 | S|49998|0061416 DRAWING DATA=2621-827-05 |96169| Z| |D|0069 | S|49998|0061460 DRAWING DATA=2621-827-05 |96169| Z| |D|0072 | S|49998|0062648 DRAWING DATA=2621-827-05 |96169| Z| |D|0073 | S|49998|0059005 DRAWING DATA=2621-827-05 |96169| Z| |D|0074 | S|49998|0064858 DRAWING DATA=2621-827-05 |96169| Z| |D|0075 | S|49998|0049858 DRAWING DATA=2621-827-05 |96169| Z| |D|0076 | Y|49998|0045411 DRAWING DATA=2621-827-05 |96169| Z| |D|0077 | S|49998|0054467 DRAWING DATA=2621-827-05 |96169| Z| |D|0078 | S|49998|0064487 DRAWING DATA=2621-827-05 |96169| Z| |D|0081 | Y|49998|0062301 DRAWING DATA=2621-827-05 |96169| Z| |D|0084 | S|49998|0066067 DRAWING DATA=2621-827-05 |96169| Z| |D|0085 | Y|49998|0056251 DRAWING DATA=2621-827-05 |96169| Z| |D|0086 | S|49998|0060812 DRAWING DATA=2621-827-05 |96169| Z| |D|0087 | S|49998|0058839 DRAWING DATA=2621-827-05 |96169| Z| |D|0088 | S|49998|0062612 DRAWING DATA=2621-827-05 |96169| Z| |D|0089 | S|49998|0074548 DRAWING DATA=2621-827-05 |96169| Z| |D|0090 | Y|49998|0048930 DRAWING DATA=2621-827-05 |96169| Z| |D|0091 | S|49998|0059186 DRAWING DATA=2621-827-05 |96169| Z| |D|0092 | S|49998|0048835 DRAWING DATA=2621-827-05 |96169| Z| |D|0093 | S|49998|0070143 DRAWING DATA=2621-827-05 |96169| Z| |D|0094 | Y|49998|0049552 DRAWING DATA=2621-827-05 |96169| Z| |D|0095 | K|49998|0076743 DRAWING DATA=2621-827-05 |96169| Z| |D|0096 | K|49998|0064466 DRAWING DATA=2621-827-05 |96169| Z| |D|0097 | S|49998|0063037 DRAWING DATA=2621-827-05 |96169| Z| |D|0098 | Y|49998|0063091 DRAWING DATA=2621-827-05 |96169| Z| |D|0099 | S|49998|0059287 DRAWING DATA=2621-827-05 |96169| Z| |D|0100 | S|49998|0059368 DRAWING DATA=2621-827-05 |96169| Z| |D|0101 | Y|49998|0061169 DRAWING DATA=2621-827-05 |96169| Z| |D|0102 | S|49998|0060377 DRAWING DATA=2621-827-05 |96169| Z| |D|0103 | Y|49998|0059739 DRAWING DATA=2621-827-05 |96169| Z| |D|0104 | S|49998|0066361 DRAWING DATA=2621-827-05 |96169| Z| |D|0105 | Y|49998|0057764 DRAWING DATA=2621-827-05 |96169| Z| |D|0106 | S|49998|0068054 DRAWING DATA=2621-827-05 |96169| Z| |D|0107 | Y|49998|0055763 DRAWING DATA=2621-827-05 |96169| Z| |D|0108 | T|49998|0062921 DRAWING DATA=2621-827-05 |96169| Z| |D|0109 | S|49998|0052182 DRAWING DATA=2621-827-05 |96169| Z| |D|0112 | S|49998|0063543 DRAWING DATA=2621-827-05 |96169| Z| |D|0113 | S|49998|0053266 DRAWING DATA=2621-827-05 |96169| Z| |D|0114 | S|49998|0069559 DRAWING DATA=2621-827-05 |96169| Z| |D|0115 | Y|49998|0055573 DRAWING DATA=2621-827-05 |96169| Z| |D|0116 | S|49998|0069053 DRAWING DATA=2621-827-05 |96169| Z| |D|0117 | S|49998|0053696 DRAWING DATA=2621-827-05 |96169| Z| |D|0122 | S|49998|0062823 DRAWING DATA=2621-827-05 |96169| Z| |D|0123 | S|49998|0051696 DRAWING DATA=2621-827-05 |96169| Z| |D|0124 | S|49998|0066863 DRAWING DATA=2621-827-05 |96169| Z| |D|0125 | Y|49998|0051820 DRAWING DATA=2621-827-05 |96169| Z| |D|0126 | V|49998|0081944 DRAWING DATA=2621-827-05 |96169| Z| |D|0127 | U|49998|0085406 DRAWING DATA=2621-827-05 |96169| Z| |D|0128 | Y|49998|0061630 DRAWING DATA=2621-827-05 |96169| Z| |D|0129 | U|49998|0081598 DRAWING DATA=2621-827-05 |96169| Z| |D|0130 | Y|49998|0063327 DRAWING DATA=2621-827-05 |96169| Z| |D|0131 | U|49998|0086898 DRAWING DATA=2621-827-05 |96169| Z| |D|0132 | Y|49998|0066292 DRAWING DATA=2621-827-05 |96169| Z| |D|0133 | U|49998|0085664 DRAWING DATA=2621-827-05 |96169| Z| |D|0134 | Y|49998|0062793 DRAWING DATA=2621-827-05 |96169| Z| |D|0135 | U|49998|0089147 DRAWING DATA=2621-827-05 |96169| Z| |D|0136 | Y|49998|0079741 DRAWING DATA=2621-827-05 |96169| Z| |D|0137 | U|49998|0087788 DRAWING DATA=2621-827-05 |96169| Z| |D|0138 | Y|49998|0068135 DRAWING DATA=2621-827-05 |96169| Z| |D|0139 | U|49998|0085308 DRAWING DATA=2621-827-05 |96169| Z| |D|0140 | Y|49998|0071977 DRAWING DATA=2621-827-05 |96169| Z| |D|0141 | U|49998|0093610 DRAWING DATA=2621-827-05 |96169| Z| |D|0142 | Y|49998|0064460 DRAWING DATA=2621-827-05 |96169| Z| |D|0143 | U|49998|0079842 DRAWING DATA=2621-827-05 |96169| Z| |D|0144 | Y|49998|0070104 DRAWING DATA=2621-827-05 |96169| Z| |D|0145 | U|49998|0081160 DRAWING DATA=2621-827-05 |96169| Z| |D|0146 | W|49998|0067818 DRAWING DATA=2621-827-05 |96169| Z| |D|0147 | U|49998|0079867 DRAWING DATA=2621-827-05 |96169| Z| |D|0148 | W|49998|0070150 DRAWING DATA=2621-827-05 |96169| Z| |D|0149 | U|49998|0082073 DRAWING DATA=2621-827-05 |96169| Z| |D|0150 | W|49998|0069868 DRAWING DATA=2621-827-05 |96169| Z| |D|0151 | U|49998|0084563 DRAWING DATA=2621-827-05 |96169| Z| |D|0152 | W|49998|0069623 DRAWING DATA=2621-827-05 |96169| Z| |D|0153 | L|49998|0034197 DRAWING DATA=2621-827-05 |96169| Z| |D|0154 | Y|49998|0072647 DRAWING DATA=2621-827-05 |96169| Z| |D|0155 | W|49998|0071924 DRAWING DATA=2621-827-05 |96169| Z| |D|0156 | U|49998|0082921 DRAWING DATA=2621-827-05 |96169| Z| |D|0157 | Y|49998|0070961 DRAWING DATA=2621-827-05 |96169| Z| |D|0158 | S|49998|0054268 DRAWING DATA=2621-827-05 |96169| Z| |D|0159 | S|49998|0039406 DRAWING DATA=2621-827-05 |96169| Z| |D|0160 | S|49998|0069458 DRAWING DATA=2621-827-05 |96169| Z| |D|0161 | Y|49998|0044767 DRAWING DATA=2621-827-05 |96169| Z| |D|0162 | U|49998|0081395 DRAWING DATA=2621-827-05 |96169| Z| |D|0163 | Y|49998|0072775 DRAWING DATA=2621-827-05 |96169| Z| |D|0164 | U|49998|0085677 DRAWING DATA=2621-827-05 |96169| Z| |D|0165 | Y|49998|0070533 DRAWING DATA=2621-827-05 |96169| Z| |D|0166 | Y|49998|0044443 DRAWING DATA=2621-827-05 |96169| Z| |D|0167 | Y|49998|0050075 DRAWING DATA=2621-827-05 |96169| Z| |D|0168 | S|49998|0062935 DRAWING DATA=2621-827-05 |96169| Z| |D|0169 | S|49998|0063928 DRAWING DATA=2621-827-05 |96169| Z| |D|0170 | S|49998|0060209 DRAWING DATA=2621-827-05 |96169| Z| |D|0171 | S|49998|0043427 DRAWING DATA=2621-827-05 |96169| Z| |D|0172 | S|49998|0059098 DRAWING DATA=2621-827-05 |96169| Z| |D|0173 | N|49998|0029605 DRAWING DATA=2621-827-05 |96169| Z| |D|0174 | U|49998|0083246 DRAWING DATA=2621-827-05 |96169| Z| |D|0175 | Y|49998|0063811 DRAWING DATA=2621-827-05 |96169| Z| |D|0176 | S|49998|0064131 DRAWING DATA=2621-827-05 |96169| Z| |D|0177 | S|49998|0050363 DRAWING DATA=2621-827-05 |96169| Z| |D|0178 | U|49998|0088103 DRAWING DATA=2621-827-05 |96169| Z| |D|0179 | Y|49998|0066602 DRAWING DATA=2621-827-05 |96169| Z| |D|0180 | S|49998|0065381 DRAWING DATA=2621-827-05 |96169| Z| |D|0181 | Y|49998|0048538 DRAWING DATA=2621-827-05 |96169| Z| |D|0182 | U|49998|0096716 DRAWING DATA=2621-827-05 |96169| Z| |D|0183 | Y|49998|0069919 DRAWING DATA=2621-827-05 |96169| Z| |D|0184 | S|49998|0065278 DRAWING DATA=2621-827-05 |96169| Z| |D|0185 | Y|49998|0044694 DRAWING DATA=2621-827-05 |96169| Z| |D|0186 | T|49998|0055911 DRAWING DATA=2621-827-05 |96169| Z| |D|0187 | S|49998|0050701 DRAWING DATA=2621-827-05 |96169| Z| |D|0188 | U|49998|0086937 DRAWING DATA=2621-827-05 |96169| Z| |D|0189 | Y|49998|0066843 DRAWING DATA=2621-827-05 |96169| Z| |D|0190 | T|49998|0067429 DRAWING DATA=2621-827-05 |96169| Z| |D|0191 | S|49998|0050349 DRAWING DATA=2621-827-05 |96169| Z| |D|0192 | S|49998|0062512 DRAWING DATA=2621-827-05 |96169| Z| |D|0193 | Y|49998|0047506 DRAWING DATA=2621-827-05 |96169| Z| |D|0194 | S|49998|0062403 DRAWING DATA=2621-827-05 |96169| Z| |D|0195 | Y|49998|0050812 DRAWING DATA=2621-827-05 |96169| Z| |D|0196 | S|49998|0063600 DRAWING DATA=2621-827-05 |96169| Z| |D|0197 | Y|49998|0051056 DRAWING DATA=2621-827-05 |96169| Z| |D|0198 | S|49998|0071191 DRAWING DATA=2621-827-05 |96169| Z| |D|0199 | S|49998|0048953 DRAWING DATA=2621-827-05 |96169| Z| |D|0200 | Y|49998|0072604 DRAWING DATA=2621-827-05 |96169| Z| |D|0201 | Y|49998|0049072 DRAWING DATA=2621-827-05 |96169| Z| |D|0202 | S|49998|0071825 DRAWING DATA=2621-827-05 |96169| Z| |D|0203 | S|49998|0066630 DRAWING DATA=2621-827-05 |96169| Z| |D|0204 | Y|49998|0045432 DRAWING DATA=2621-827-05 |96169| Z| |D|0205 | Y|49998|0050005 DRAWING DATA=2621-827-05 |96169| Z| |D|0206 | Y|49998|0057174 DRAWING DATA=2621-827-05 |96169| Z| |D|0207 | Y|49998|0052828 DRAWING DATA=2621-827-05 |96169| Z| |D|0208 | Y|49998|0045651 DRAWING DATA=2621-827-05 |96169| Z| |D|0209 | T|49998|0064502 DRAWING DATA=2621-827-05 |96169| Z| |D|0210 | Y|49998|0051310 DRAWING DATA=2621-827-05 |96169| Z| |D|0211 | Y|49998|0065831 DRAWING DATA=2621-827-05 |96169| Z| |D|0212 | Y|49998|0053671 DRAWING DATA=2621-827-05 |96169| Z| |D|0213 | T|49998|0061896 DRAWING DATA=2621-827-05 |96169| Z| |D|0214 | T|49998|0045890 DRAWING DATA=2621-827-05 |96169| Z| |D|0215 | T|49998|0063478 DRAWING DATA=2621-827-05 |96169| Z| |D|0216 | Y|49998|0044551 DRAWING DATA=2621-827-05 |96169| Z| |D|0218 | T|49998|0048466 DRAWING DATA=2621-827-05 |96169| Z| |D|0219 | T|49998|0049644 DRAWING DATA=2621-827-05 |96169| Z| |D|0220 | T|49998|0041601 DRAWING DATA=5486331 |53711| H| |D|0001 | H|49998|0200647 DRAWING DATA=5486332 |53711| G| |D|0001 | G|49998|0131198 DRAWING DATA=5486333 |53711| G| |D|0001 | G|49998|0238779 DRAWING DATA=6984058 |53711| A| |D|0001 | A|00026|0000000 DOCUMENT REF DATA=FED-STD-H28 | | |B |190424|A| | | DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01| DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A|2 | | DOCUMENT REF DATA=QQ-N-286 | | |G |001207|A| | | DOCUMENT REF DATA=ASTM-B369 | | | |200401|A| | | DOCUMENT REF DATA=ASTM-B446 | | | |190401|A| | | DOCUMENT REF DATA=ASTM-A574 | | | |211201|A| | | DOCUMENT REF DATA=ASTM-F606 | | | |191115|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=MIL-DTL-1222 | | |J |001208|A| | | DOCUMENT REF DATA=ASTM-E1417 | | | |160615|A| | | DOCUMENT REF DATA=ASTM-E1444 | | | |160601|A| | | DOCUMENT REF DATA=ASTM-D4066 | | | |130701|A| | | DOCUMENT REF DATA=SAE AMS 6931 | | |D |171201|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=MIL-DTL-18240 | | |F |000313|A|1 | | DOCUMENT REF DATA=MIL-C-24679 | | | |880506|A| | | DOCUMENT REF DATA=QPL 25027 | | |17 |000207|A| | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A|1 | | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=A-A-59004 | | |B |181118|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=AIA/NAS NASM 17828 | | |1 |130430|A| | | DOCUMENT REF DATA=AIA/NAS NASM 25027 | | |1 |121221|A| | | DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=T9074-AS-GIB-010/271 | | |1 |140911|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 REFURBISHED MATERIAL STATEMENT OF WORK (REPAIR SOW) - 3.1.1 INSPECTION - Clean and determine if refurbishment is possible. At disassembly, the Contractor must record all identifying markings found on the parts of each assembly. The Contractor must maintain traceability of these markings to each unit throughout refurbishment. 3.1.2 IDENTIFYING MARKINGS - Part must have a MIC (Material Identification a and Control) code, heat/heat lot code, or unique Contractor traceability number/code that is visible on the part. See Material Traceability in paragraph 3 (Quality Assurance Provisions) of this contract for traceability requirements. The MIC code can consist of a 2, 3, or 4 letter material identifier, 4 or 5 digit Julian date, 3 digit lot serial number, and Certifying Activity Designator (CAD) which will be 1 or 2 letters; the 4 parts are normally separated by hyphens; examples: TIA-3089-30-QQ and ST-06262-506-A. 3.1.3 RE-USEABLE PARTS - - Any parts of the original assembly that are useable (replacement is not necessary), that are properly marked as identified above, and that have material certifications available may be utilized as initially supplied. Certifications are not required to be resubmitted by the contractor. - Any parts of the original assembly that are useable (replacement is not necessary), are properly marked as identified above, but material certifications are not available at the contractor's facility, a waiver must be submitted in accordance with Waiver/Deviation (Configuration Control) requirements specified elsewhere in the Contract. 3.1.4 NON-USEABLE PARTS - -Any parts of the original assembly that are not properly marked as identified above must be replaced and the required certifications must be submitted. - Any parts of the original assembly that are not usable (replacement is necessary) must be replaced and the required certifications must be submitted. 3.1.5 REFURBISHMENT - Upon completion of inspection, this item must be refurbished to be in accordance with ;Naval Sea Systems Command drawing 517-5486331 Assembly IE, ER26M65-0001H1, ER26M65-0001H2, ER26M65-0003G1, and MS NO. 5310-081-142 REV - CHG-13 (CSD363); , except as amplified or modified herein. This applies to all ""Parts Requiring Certification"" as identified elsewhere in this Contract/Purchase Order. 3.1.6 ADDITIONAL SOW REQUIREMENTS - ;N/A; 3.1.7 ;Notes 9.A and 9.H on NAVSEA drawing 5486333 do not apply. The pre-manufactured Kamatics bearings listed on sheet 1 of Electric Boat engineering report ER26M65-0003G1 must be used in this valve.; 3.1.8 ;Stress relief per General Note 9 of drawing 5486332 is not required. Stress relief may be performed, at the option of the manufacturer, provided that all dimensional requirements are met. Stress relief, if performed, must be at 575 +/- 25 degrees Fahrenheit for one hour then air cooled.; 3.1.9 ;The material for the washer, Item 12 of NAVSEA drawing 5486333 and item 14 of NAVSEA drawing 5486331, must be per AMS 5906 and meet the spring load requirements of drawing 5486333 zone 17-B (The load at 0.023 inside height is to be 375 lbs ? 10%). Chemical and mechanical certification is not required. Any revision of AMS 5906 may be used.; 3.1.10 ;Note: For piece 7A of drawing 2621-827-05, allow thread machining relief between end of thread form and head of .045 min to .104 max.; 3.1.11 ;Note: Use Monoplex DOS (HallStar or equal) as the replacement for Plexol referenced in Note 8 on Drawing 5486331.; 3.2 Contract Support Library - Additional requirements for this item are identified as Contract Support Library Reference Number ;CSD363; in ECDS at https://register.nslc.navy.mil/ 3.3 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Body, Item 6 and Tailpiece, Item 7 both of drawing 5486332; Material - ;ASTM-B369, Alloy UNS C96400; Part - ;Trunnion Ball (Q3), Item 3 of drawing 5486333; Material - ;ASTM B446, Grade 1, Alloy UNS N06625, annealed; Part - ;Bonnet, Item 2 of drawing 5486333; Material - ;MIL-C-24679, Alloy C71500; Part - ;Self Locking Cap Screws, Item 39 of drawing 5486331; Material - ;MIL-DTL-1222, Type II, QQ-N-286, Annealed and Age Hardened and marked .K. and Self locking element to be in accordance with MIL-DTL-18240; Part - ;Continuous Threaded Studs, Items 24 and 25 of drawing 5486331; Material - ;MIL-DTL-1222, QQ-N-286, Type IV, Annealed and Age Hardened and marked .K.; Part - ;Vent Valve, Piece 7A of drawing 2621-827-05; Material - ;QQ-N-281 with Mechanical properties in accordance with Note 22 of drawing 2621-827-05; PART - ;Self-locking Hex Nuts, Items 21 and 22 of drawing 5486331; MATERIAL - QQ-N-281, class A annealed (hot finished or cold drawn) or class B cold drawn. All material must be from the same class. SELF-LOCKING ELEMENT- ASTM-D4066, Group 01, Class 1 or 2, Grade 1 Part - ;Stem, Item 3 of drawing 5486331; Material - SAE-AMS-6931 Note: Mechanical properties for bars, forgings and forging stock over 10"" must be as specified in the applicable drawing. If the mechanical properties are not provided in the drawing, the mechanical properties specified in SAE-AMS-6931 Table 2 for material 6"" to 10"", must be applied. Part - ;Seats (Q3), Item 7 of drawing 5486333; Material - Delrin: Dupont AF DE588 (Teflon Filled Acetal) (Properties Specified Below Only) ITEM PROPERTY ASTM TEST METHOD VALUE (A) Specific Gravity D792 (Note 1) 1.50 - 1.57 (B) Melting Point D2133 or D3418 172 - 184 deg C (342 - 363 deg F) (C) Tensile Strength (MIN) D638 (Notes 1 & 5) 6100 PSI (D) Tensile Impact (MIN) D1822 Type S (Notes 1 & 5) 5 FT-LB/SQ IN (E) Compressive Stress D695 2100 @ 1% DEF. (MIN - PSI) (Notes 1 & 5) 11,000 @ 10% DEF. (F) Water Absorption D570 .30% MAX 24 Hours (G) Rockwell Hardness (R) D785 (Note 1) 115 +/- 15 (H) Teflon Fiber Content (Note 2) 18 - 23% (I) Dimensional Change (Note 4) .7% MAX NOTES: 1. Material conditioning prior to test is at the vendor's option. 2. Teflon Fiber Content - As certified by DuPont (raw material). 3. Visual and Dimensional Inspection of Product (Final Machined Condition) - White Teflon string inclusions must not exceed the following: A.Diameter 1/32"" B. Length 1/8"" C. Density 6 indications per 100 SQ IN 4. The test method to determine dimensional stability must be performed as follows: The test specimens (finished pieces) tested must be measured at 23 +/- 3 deg C (73 +/- 5F) and placed in a mineral oil bath maintained at 160 +/- 3 deg C (320 +/- 5F) the specimens must remain in the bath for six (6) hours at temperature and allowed to slow cool in the bath at a rate not to exceed 23 +/- 3 deg C (73 +/- 5F) per hour. When the bath reaches 23 +/- 3 deg C (73 +/- 5F), the test specimens must be removed and measured. The percent change in each dimension, outside diameter, inside diameter and thickness must not be greater than the value specified. ^Mineral oil meets the specification as listed below: Description.......................Passes U.S.P. Test (USP XX, P.1143) Solubility........................Passes U.S.P. Test (USP XX, P.1143) Neutrality........................Passes U.S.P. Test (USP XX, P.532) Readily Carbonizable Substances...Passes U.S.P. Test (USP XX, P.532) Limit of Polynuclear Compounds....Passes U.S.P. Test (USP XX, P.532) Solid Paraffin....................Passes U.S.P. Test (USP XX, P.532) Specific Gravity @ 25 deg C (77 deg F).0.8600 to 0.8900 Viscosity @ 37.8 deg C (100F).....73.6 to 84.4 Centistokes (340-390 SUS) Flash Point Cleveland Open Cup....420 deg F (216C) (Typical) Refractive Index @ 20C (68F)......1.480 (Typical) 5. Values are minimum mean values. Individual specimen values may not vary more than 25% below the specified minimum mean value. Should one specimen exceed the 25% criteria, retest is required. Failure to meet the above criteria a second time is cause for rejection. 3.4 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings is still required, but certifications are only required as listed below. Test - ;Liquid Penetrant Inspection; Item - ;Continuous Threaded Studs, Items 24 and 25 and Sel...
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/5243cdfcf15549519a7a866903d09ff3/view)
 

Record

SN06375522-F 20220702/220630230209 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |