SOURCES SOUGHT
10 -- Sources Sought- 30MM Drum Entrance Cover
- Notice Date
- 7/6/2022 5:14:06 AM
- Notice Type
- Sources Sought
- NAICS
- 332994
— Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- Contracting Office
- DLA AVIATION AT WARNER ROBINS, GA ROBINS A F B GA 31098-1813 USA
- ZIP Code
- 31098-1813
- Solicitation Number
- FD2060-23-00074
- Response Due
- 8/5/2022 2:00:00 PM
- Point of Contact
- Dakota Collins, Phone: 478-222-0021, Kenya Jackson, Phone: 4789263946
- E-Mail Address
-
dakota.collins@us.af.mil, kenya.jackson.3@us.af.mil
(dakota.collins@us.af.mil, kenya.jackson.3@us.af.mil)
- Description
- FROM: Dakota Collins/409 SCMS/GUME TO: DLA Aviation Procurement Operations at Warner Robins (SPRWA1) LOCATION: Robins AFB, GA 31098-1813 FBO Post Title: Request for Interested Manufacturers, 30MM GAU-8 Entrance Drum Cover NSN 1005-00-570-3715, Part Number 198F288 SUBJECT: The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of the 30MM GAU-8 Entrance Drum Cover NSN 1005-00-570-3715. NAICS: 332994 Item Description: NSN: 1005-00-570-3715 The A-10 aircraft drum cover assembly is mounted on each end of the outer drum. The exit end drum cover assembly (exit cover, P/N 198F216-1) is identical in function to the entrance end drum cover assembly (entrance cover, P/N 198F288-1); however, the exit cover is designed to carry all axial loads imposed on the drum. The entrance materials/composition is cast from entirely Aluminum (AL); MIL-A-21180, A356 Class 11 that is precision machined to tolerances up to two decimal places and surface tolerance up to three decimal places. All cast surfaces to have a 500 finish. Casting shall not be shot blasted. The exit and entrance covers are not interchangeable because of the differences in material and load bearing capacity. When the system is operating in the firing direction, round/spent cases are handed off from the entrance unit to the entrance cover. From the entrance cover the round/spent cases are handed off to the scoop disc and from the scoop disc to the drum and helix. At the exit end of the drum, the scoop disc picks the rounds/spent cases from the helix and hands them off to the exit cover. The exit cover feeds the rounds/spent cases to the exit unit. When the system is operating in the reverse (clearing) direction, all handoffs are the reverse of those just described. Retainer partitions, mounted on a retainer gear in each drum cover, control the rounds between the scoop discs and the entrance and exit units. A spring loaded timing pin on each cover is used to time the drum for installation of the entrance and exit units. Impediment to Competition: This item will have an Acquisition Method Code/Acquisition Method Suffix code of 1/C, suitable for competitive acquisition for the first time due to completed of 3-D model.� An AMSC of 1/C requires potential suppliers to satisfy a qualification statement detailing the manufacturing and quality requirements needed to make the item which will result in limited competition. An alternate source must qualify in accordance with the design control activity�s procedures, as approved by the cognizant Government engineering activity. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified sources require acquisition of the part from the approved source. INTEREST The DLA/AWB Contracting Office intends to award a limited competition contract to for the manufacture of the 30MM Drum Entrance Cover in support of the A-10 aircraft. Any interested parties may identify their interest and capability to respond to the requirement no later than 5 August 2022 by emailing Dakota Collins at�dakota.collins@us.af.mil and/or buyer Kenya Jackson at Kenya.Jackson.3@us.af.mil. The government intends to procure these items using Other Than Full and Open Competition as prescribed by FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. DISCLAIMER This sources sought synopsis is for informational purposes only. This is not a request for proposal. It does not constitute a solicitation, and shall not be construed as a commitment by the government. Responses in any form are not offers, and the government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/0e018159bce44a3ba7a01b745e3a129c/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06380257-F 20220708/220706230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |