SOLICITATION NOTICE
56 -- 56--Construction, Building Supplies
- Notice Date
- 8/8/2022 10:16:18 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 423390
— Other Construction Material Merchant Wholesalers
- Contracting Office
- W7NS USPFO ACTIVITY NC ARNG RALEIGH NC 27607-6412 USA
- ZIP Code
- 27607-6412
- Solicitation Number
- W9124222Q0087
- Response Due
- 8/11/2022 8:00:00 AM
- Archive Date
- 02/07/2023
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W9124222Q0087 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 423390 with a small business size standard of 100.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-08-11 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Butner, NC 27509 The National Guard - North Carolina requires the following items, Meet or Exceed, to the following: LI 001: Seed, 40, LBS; LI 002: Straw square bail, 6, EA; LI 003: Masonry Drill bits set (1/8"" - 3/8""), 2, EA; LI 004: Wood paddle bits set (1/8"" - 3/4""), 2, EA; LI 005: Metal drill bits set (1/16"" - 1/2""), 2, EA; LI 006: Miter saw blade12"", 2, EA; LI 007: 7-1/4"" 24 tooth circular saw blad, 6, EA; LI 008: 14"" concrete blade, 2, EA; LI 009: 10lb. Multipurpose Dry-Chemical Type Fire Extinguisher w/ red mounting bracket, 1, EA; LI 010: 1/2"" roof sheathing, 27, EA; LI 011: 1/2"" roof sheathing edge clips (1-1/4"" galv. Simpson), 80, EA; LI 012: 10d smooth framing gun nails (for Dewalt Cordless 20V gun, DCN692M1), 2000, EA; LI 013: 16d smooth framing gun nails (for Dewalt Cordless 20V gun, DCN692M1), 2000, EA; LI 014: 2x4x12 Southern Yellow Pine, 75, EA; LI 015: 2x6x12 Southern Yellow Pine, 36, EA; LI 016: 2x4x12 Pressure Treated, 6, EA; LI 017: 2x6x12 Pressure Treated, 6, EA; LI 018: Simpson RBC Clips, 16, EA; LI 019: Simpson HGA10 Clips, 33, EA; LI 020: Simpson H2.5 Hurricane Ties, 50, EA; LI 021: Simpson 2x4 hanger (joist type), 40, EA; LI 022: Simpson hot-dipped galvanized 1.5"" nails, 1200, EA; LI 023: Tyvek house wrap 4'x100', 1, Roll; LI 024: Grip-Rite #12 x 1"" plastic round cap roofing nails, 3000, EA; LI 025: 30lb asphalt felt, 5, EA; LI 026: Ice and Watershield self-adhered roofing underlayment 3'x 75' roll, 5, EA; LI 027: 1"" x 6"" x 12' Hardie Fiber Cement Smooth Fascia primed, 14, EA; LI 028: 1"" x 4"" x 12' Hardie Fiber Cement Trim primed, 10, EA; LI 029: 5/16"" x 8-1/4"" x 12' Hardie Lap Siding primed, 25, EA; LI 030: 24"" wide x 12' smooth vented Hardie fiber cement soffit primed, 8, EA; LI 031: 16"" wide x 12' smooth Hardie fiber cement soffit primed, 8, EA; LI 032: Siding nails - 2"" hot-dipped galvanized, spiral, 15, LBS; LI 033: #16-1/2"" x 1"" medium brown steel panel board nails 6 oz box, 10, Box; LI 034: Grip Rite Primeguard Plus #9 x 1-1/2"" Deck Screws, 25, LBS; LI 035: #8 x 1-1/2"" star drive trim head screw, 500, EA; LI 036: 5/8"" pressure treated tongue & groove plywood (ceilings), 12, EA; LI 037: #13 x 2"" 6 penny Bright steel finish nails, 5, LBS; LI 038: 1"" x 4"" x 12' primed Southern Yellow Pine, 45, EA; LI 039: Aluminum Flashing, Tony Taupe (SW-7038) match Drip Edge, .018"" thick, 8"" wide x 12' long, 8, EA; LI 040: Corrugated Metal (PBR profile) roof panels - 24 ga., grade 40, smooth, Status Bronze (SW-7034), 12' lengths, 35, EA; LI 041: Roof Screws - galv., Status Bronze (SW-7034), EPDM gasket, painted flange, #9-16 x 1-1/2"", 400, EA; LI 042: #14 x 7/8"" sheetmetal stitch screws, Status Bronze (SW-7034), 800, EA; LI 043: Ridge Vent Closure, 24"" wide x 12' long (4/12 pitch), Status Bronze (SW-7034), 4, EA; LI 044: Gable Rake Trim Closure, 12' long, .018"" thick, Status Bronze (SW-7034) color, 6, EA; LI 045: Flashing coil, 24"" wide x 50', .018"" thick, Status Bronze color (SW-7034), 6, EA; LI 046: Closure strips - closed cell, expanded, rubber or crosslinked, polyolefin-foam 1"" thick to match panel profile, 200, LF; LI 047: Aluminum Flashing, Status Bronze (SW-7034), drip edge, 8"" wide x 12' long, .018"" thick, 20, EA; LI 048: Flashing coil, 24"" wide x 50', .018"" thick, Status Bronze (SW-7034) color, 8, EA; LI 049: Primer Paint, latex, 10, Gal.; LI 050: Primer Paint, water based, alkyd, anti-corrosive for metal, 2, Gal.; LI 051: Water-based light industrial coating paint, exterior Status Bronze (SW-7034), 5, Gal.; LI 052: Paint 1, Tony Taupe (SW-7038) exterior latex, wood, semi-gloss, 10, Gal.; LI 053: Paint 2, Snowbound (SW-7004) exterior latex, wood, flat, 10, Gal.; LI 054: Paint 2, Snowbound (SW-7004) exterior latex, wood, semi-gloss, 5, Gal.; LI 055: 9"" metal standard painter roller frame, 4, EA; LI 056: 3-pack contractor grade 9"" x 3/8"" nap paint rollers, 3, EA; LI 057: 2"" paint brush, 5, EA; LI 058: 2"" paint brush, stain, 4, EA; LI 059: 2"" painters tape, 3, EA; LI 060: Solid Stain, Shagbark (SW-3001), 1, Gal.; LI 061: Metal Paint pans for 9"" roller, 3, EA; LI 062: Plastic paint pan liners, 12, EA; LI 063: Paint thinner, 1 gallon, 1, EA; LI 064: Painters plastic sheeting 12' x 400', 1, EA; LI 065: Paint 3, Status Bronze (SW-7034) exteior latex, semi-gloss, 5, Gal.; LI 066: Painters wrags, cotton, 1, Box; LI 067: Caulk gun, 3, EA; LI 068: Caulk, elastomeric joint sealnt, color to match cmu, Dow Corning 786 mildew resistant, Type S and NS, 2, Boxes; LI 069: Caulk, single component urethane joint sealant, paintable, 2, Boxes; LI 070: 3/4"" marine grade plywood, 6, EA; LI 071: 1-1/2"" x 3/8"" tapcons w/ drill bits, 90, EA; LI 072: 4"" x 3/8"" expansion bolts, 65, EA; LI 073: Grip Rite Primeguard Plus #8 x 1-1/4"" Deck Screws, 5, LBS; LI 074: #4 rebar 20' lengths, 10, EA; LI 075: 5-1/2""x5-1/2 x 3/16"" galvanized steel angle 12' lengths, 1/2"" holes punched every 16"" OC, 14, EA; LI 076: 8""x8""x16"" Smooth Face CMU Bullnose, 85, EA; LI 077: Core-Fill Masonry Grout (80lb bags) (just add water mix) (3,000psi), 45, EA; LI 078: Mortar (60lb bags) - ProFinish by Quikrete Blended Mason Mix Type S 1900 psi (Just add water mix), 14, EA; LI 079: 2 part epoxy tubes for rebar securing into slab, 4, EA; LI 080: epoxy gun - for same tubes on line above, 1, EA; LI 081: ""Tapcon"" 1/4"" x 2-1/2"" screws, 60, EA; LI 082: 3/16"" x 6"" masonry bit, 10, EA; LI 083: Bits for impact drive drill - assortment of phillips drive, 5, EA; LI 084: 9/16"" x 8"" masonry bit, 3, EA; LI 085: Solomon Colors Concentrated Mortar Color, 10, LBS; LI 086: Quikrete 5000 (just add water mix) 80 lb bag, 23, EA; LI 087: 100 amp Single Phase, 240 Volt Meter Base, 1, EA; LI 088: AIC, 60 amp Main Breaker, 1, EA; LI 089: Single Pole 20 amp Bolt-in Breakers, 5, EA; LI 090: Two Pole 20 amp Bolt-in Breaker, 1, EA; LI 091: Two Pole Surge Protector, 60 amp, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - North Carolina intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - North Carolina is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Best Value Basis of Award Criteria: The Government intends to award a firm-fixed price contract to the responsible vendor whose quote conforming to the solicitation provides the Best Value to the Government. �Best value� means the expected outcome of an acquisition that, in the Government�s estimation, provides the greatest overall benefit in response to the requirement. In accordance with FAR 12.602 & FAR 13.106-2, technical, price & readily available past performance information will be considered in the streamlined evaluation. This may result in award being made to a higher-rated, higher-priced quote. The Government�s selection of a higher-rated, higher-priced quote will be supported by a determination that the technical/past performance superiority warrants the additional cost involved. Offerors are encouraged to submit past performance references. Offerors may submit past performance references. Past performance may be based on one or more of the following: Contracting Officer�s prior knowledge/experience; customer past performance inquiry replies; PPIRS/FAPII, or any other reasonable basis. While the Government and the Source Selection Authority will strive for maximum objectivity, the evaluation process, by its nature, is subjective and therefore, professional judgment is implicit throughout the entire evaluation process New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/d96befa43a6f40ee806f590714d0d913/view)
- Place of Performance
- Address: 105 Central Ave , Butner, NC 27509, USA
- Zip Code: 27509
- Country: USA
- Zip Code: 27509
- Record
- SN06418182-F 20220810/220808230116 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |