SAMDaily.us | PRESOL | 61 | 1 NSN LTC

SAMDAILY.US - ISSUE OF AUGUST 31, 2022 SAM #7579
SOLICITATION NOTICE

61 -- 1 NSN LTC

Notice Date: 8/29/2022 1:12:03 PM
Notice Type: Presolicitation
NAICS: 335911 — Storage Battery Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: SPE7LX22R0058
Response Due: 9/21/2022 8:59:00 PM
Point of Contact: Scott Knowles614-692-0639
E-Mail Address: Scott.Knowles@dla.mil
(Scott.Knowles@dla.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: NSN(s): 6140-01-446-9498�� Item Description: SEE RFQ �� Manufacturer�s Code and Part Number (if applicable): N/A �� Drawing Number (if applicable): SEE RFQ �� Specification Number (if applicable): N/A Qualification Requirements (e.g. QPL) and where information on qualification requirements may be obtained. (if applicable): N/A Quantity (including option quantity) : Anticipated type of contract is an IDC. Items to be shipped to various military depot locations within established minimum & maximum quantity limits on an as needed basis. Unit of Issue: EA Destination Information: FOB DESTINATION � STOCK ONLY Delivery Schedule: SEE RFQ�� ** Anticipated type of contract is an Indefinite Quantity Contract (IQC), I/A/W FAR Part 12 procedures. All responsible SMALL BUSINESS sources may submit an offer/quote which shall be considered. --- ( x )� The solicitation will be available on DLA�s Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 09/06/2022. ( x )� The Small Business size standard is _1250_ employees. ( x )� The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.� The total duration (base plus option years) shall not exceed 5 years.� (x )� While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation � TYPE OF SET-ASIDE: 100% SBSA ----------------------------------------------------------------------------------------------------------------------------- NSN: 6140-01-446-9498 BATTERY, STORAGE LEAD-ACID, DRY CHARGED, MAINTENANCE FREE SUPPLIED WITH ACID OVERPACK (ELECTROLYTE) D.O.T. CLASS: CORROSIVE UN2796 SHIPPING NAME: BATTERY, FLUID ACID RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RT001: MEASURING AND TEST EQUIPMENT CONTRACTOR FAT NUMBER OF UNITS REQUIRED TO BE TESTED: 10 BATTERIES, 4 EA. CONTAINER, 7 EA. COVERS PER ATPD 2206 ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL � � �NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT � � �CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED � � �UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY � � �USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED � � �INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; � � �AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. � � �PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS � � �CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN � � �A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR � � �MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ZD072: Hazard Communication Standard Notice: � � �Effective June 1, 2015, Federal Standard No. 313-E, Material Safety � � �Data, Transportation Data and Disposal Data for Hazardous Materials � � �Furnished to Government Activities, establishes the requirement for � � �preparation and submission of Safety Data Sheets (SDS) in lieu of � � �Material Safety Data Sheets (MSDS) by suppliers who provide hazardous � � �materials to government activities. � � �The Occupational Safety and Health Administration (OSHA) has modified � � �its Hazard Communication Standard (HCS) to conform to the United Nations � � �Globally Harmonized System of Classification and Labeling of Chemicals. � � � As a result of this change, GSA revised Federal Standard No. 313-E � � �requiring Safety Data Sheets for classifying chemicals and communicating � � �the applicable information on labels. � � �In accordance with the revised standard after June 1, 2015: � � �1. Suppliers will be required to submit, to the contracting officer for � � �review and approval prior to award, safety data sheets consistent with � � �the requirements found at 29 C.F.R. �1910.1200 for hazardous materials � � �delivered to the Government. � � �2. Suppliers will also be required to submit, to the contracting officer � � �for review and approval prior to award, Hazardous Communication Standard � � �(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or � � �current Consumer Product Safety Act (CPSA), Federal Hazardous Substance � � �Act (FHSA) labels when subject to labeling requirements under those � � �statutes. This product labeling is required for hazardous materials � � �delivered to the Government. � � �3. Finally, suppliers must train their employees on the new safety data � � �sheets, hazardous communication labels, and requirements of 29 C.F.R. � � �1910.1200. � � �For more information on SDS, refer to OSHAs website, available at: � � �https://www.osha.gov/law-regs.html � � �For information on 29 C.F.R. 1910.1200, refer to the below link: � � �https://www.osha.gov/dsg/hazcom/index.html RS062: Shelf life requirement RS001 for a TYPE 2 (CODE 9) item with a � � �shelf life of 60 month (extendable) applies to this item. ZD080 :SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. � � �SHELF LIFE: TYPE II, 60 MONTHS � � �FIRST ARTICLE TESTING AS REQUIRED BY PARA 4.4 � � �CORRECTION TO ATPD 2206 REV 7 AS FOLLOWS: � � �PARA. 4.6.17.A IS CHANGED TO INDICATE ""-54 +/- � � �1 DEGREE C"" IN LIEU OF ""-48 +/- 1 DEGREE C"". � � �EXCEPTION TO SPEC: � � �DELETE REQUIREMENT 3.3.12, � � �DELETE 3.2.2 IN ITS ENTIRETY AND REFERENCE TO � � �3.2.2 IN 4.6.1 � � �END OF EXCEPTIONS. �A0003: MIL-STD-130N(1) DATED 16 NOV 2012. � � �IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY CA070: FULL AND OPEN COMPETITION APPLY ZD074: THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL � � � � � � � � � � � � � � � � � �OF A TYPE') CRITICAL APPLICATION ITEM � � �IAW BASIC DRAWING NR 19207 ATPD2206 � � �REVISION NR 7 � DTD 08/13/2001 � � �PART PIECE NUMBER: 6TMF/TYPEI � � �IAW REFERENCE SPEC NR MS52149G NOT 2 � � �REVISION NR � � DTD 06/12/2015 � � �PART PIECE NUMBER: PREP FOR DELIVERY � � �PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 � � �QUP:001 �PRES MTHD:HM �CLNG/DRY:1 �PRESV MAT:00 � � �WRAP MAT:00 �CUSH/DUNN MAT:00 �CUSH/DUNN THKNESS:0 � � �UNIT CONT:D4 �OPI:M � � �PACK CODE:U � � �MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. � � �SPECIAL MARKING CODE:33 -33 Type II, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT � � �Container for Battery Fluid Acid shall conform to latest version of IATA � � �specification for plastic containers, overpack within a 4G fiberboard � � �box, Box shall be one per battery. � � �THIS MATERIAL IS CONSIDERED HAZARDOUS MATERIAL AND REQUIRES SPECIAL � � �PACKAGING, MARKING, AND LABELING. PLEASE ENSURE THAT ALL PACKAGING � � �REQUIREMENTS AS DETAILED IN THE CONTRACT ARE MET. THIS BATTERY IS � � �REGULATED BY THE DEPARTMENT OF TRANSPORTATION (DOT). A MATERIAL SAFETY � � �DATA SHEET SHALL ACCOMPANY EACH SHIPMENT. � � �HAZARDOUS MATERIAL PACKAGING REQUIREMENTS SHALL COMPLY WITH TITLE 49 � � �CODE OF FEDERAL REGULATIONS (CFR). AUTHORIZED SPECIFICATION PACKAGINGS � � �FOR BATTERIES ARE LOCATED IN TITLE 49 CFR, PARAGRAPH 173.159. SELECTION � � �OF AUTHORIZED SPECIFICATION PACKAGINGS MUST ENSURE IT DOES NOT EXCEED � � �THE WEIGHT AND SIZE LIMITATIONS OF THE CONTAINER. � � �SELECTED AUTHORIZED SPECIFICATION PACKAGINGS SHALL ADEQUATELY PROTECT � � �THE BATTERY AGAINST SHOCK AND VIBRATION AND ENSURE TABS TO DO NOT BREAK � � �AND CAUSE AN INTERNAL SHORT CIRCUIT WITHIN THE BATTERY. AUTHORIZED � � �SPECIFICATION PACKAGINGS (CONTAINERS) SHALL NOT BE DAMAGED IN ANY WAY. � � �ASSETS UNDER THESE CONDITIONS SHALL BE CONSIDERED AN UNACCEPTABLE � � �PRODUCT AND SHALL NOT BE SHIPPED TO ANY DEPOT, OR CUSTOMER, OR RECEIVED � � �INTO ANY DOD INVENTORY SYSTEM. �MATERIAL WILL BE REFUSED AND RETURNED TO � � �CONTRACTOR. � � �EACH CONTAINER SHALL BE MARKED AND LABELED IN ACCORDANCE WITH THE � � �GOVERNING HAZARDOUS MATERIAL REGULATION (DEPENDENT UPON MODE OF � � �TRANSPORTATION) AND IN ACCORDANCE WITH MIL-STD-129 TO BE PROPERLY � � �IDENTIFIED AND RECEIVED INTO INVENTORY. SHELF LIFE MARKINGS SHALL BE � � �APPLIED TO THE CONTAINER'S LABEL TO ENSURE STORAGE CONTROLS ARE IN PLACE � � �AND INSPECTION DATA IS AVAILABLE. � � �PROPER SHIPPING NAME, UN NUMBER, HAZARD CLASS, AND PACKING GROUP � � �REQUIRED TO BE MARKED ON EACH CONTAINER � � �HAZARD WARNING LABEL REQUIRED ON EACH AUTHORIZED PACKAGING (CONTAINER): � � �CORROSIVE, AS DISPLAYED BELOW. IN ADDITION, ORIENTATION LABELS SHALL BE � � �APPLIED TO THE PACKAGE TO ENSURE IT DOES NOT LEAK (ARROW UP, � � �ILLUSTRATION ONLY). � � �ALL IDENTIFICATION MARKINGS AND HAZARD WARNING LABELS SHALL BE PLACED ON � � �THE SAME CONTAINER PANEL. � � �ALL NON-POP CONTAINERS SHALL MEET BOX MAKERS CERTIFICATE REQUIREMENTS IN � � �ORDER TO ADEQUATELY HOLD LOAD IMPOSED. CHECK SPECIFICATION FOR WEIGHT � � �LIMITATION AND CHECK PACKAGED WEIGHT TO ENSURE THE CONTAINER CAN � � �ADEQUATELY PROTECT THE BATTERY DURING HANDLING, STORAGE, AND/OR � � �TRANSPORTATION. � � �SHIPMENTS BY MILITARY AIR SHALL USE AFMAN 24-204 SHIPPERS DECLARATION TO � � �ENSURE MATERIAL WILL NOT BE FRUSTRATED AT AERIAL PORTS.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/048d844f80114c87aa2fc69408d8fd6f/view)
Place of Performance: Address: Columbus, OH 43232, USA; Zip Code: 43232; Country: USA
Record: SN06445010-F 20220831/220829230131 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

61 -- 1 NSN LTC