SOLICITATION NOTICE
42 -- 42--Firefighting Turn Out Gear
- Notice Date
- 9/7/2022 10:55:28 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339999
— All Other Miscellaneous Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- 416TEC_FFGEAR_907
- Response Due
- 9/12/2022 2:30:00 PM
- Archive Date
- 03/11/2023
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 416TEC_FFGEAR_907 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-09-12 17:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions. The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: HELMET, Shall be brand name or equal to STRUCTURAL FIREFIGHTING BULLARD UST-LW a. Traditional Helmet with Amber Defender Visor, Black For Structural Firefighting Operations b. Fiberglass composite, high temperature, flame and chip resistant thermoset resin compression molded one piece shell c. One size headband with ratchet adjustment system for head size range 6 3/8 to 8 �, with six-way head suspension system attached to impact cap. Standard flannel headband and liner. d. Eye Protection: NFPA and ANSI certified Defender Visor, Amber Tuffshield Lens, must retract inside helmet, able to raise and lower with gloved hand, easy removal with not tools for cleaning/replacement. NFPA and ANSI certified EZ Fl ips �Bourkes� e. Nomex quick release chin strap w/ postman slide f. Black Nomex Ear Flaps g. Reflexite lime/yellow trapezoids, 19, EA; LI 002: HOOD, FIREFIGHTING FIRE DEX HOOD H41 INTERCEPTOR a. One Size Fits All b. NFPA 1971 and UL Certified. Meets or exceeds OSHA Standards c. Nomex Construction d. Color: Black, 38, EA; LI 003: BAG, SCBA MASK Wolfpack Gear SCBA Mask Pouch a. Size MUST accommodate Draeger Mask we already have on hand b. Constructed to protect mask from scratches and other damage c. Mildew Resistant, 19, EA; LI 004: FLASHLIGHT, FIREFIGHTING RESCUE Streamlight 90512 Survivor LED Flashlight with AC Fast Charger, Yellow - 175 Lumens a. Right Angle, Water Resistant, Heavy Duty Impact Tested b. LED Smoke Cutting Technology (Min. 175 Lumen, 36,000 Candela) c. Push Button Glove Friendly Switch d. Rechargeable Battery and Charger plus Non-rechargeable Battery Friendly, 19, EA; LI 005: COAT, STRUCTURAL FIREFIGHTING Coat shall be brand name or equal to Fire Dex FX-R with a 6.9 oz Kombat Flex outer shell, Glide Ice 2 Layer and Stedair 4000 Moisture Barrier a. Custom Sized and Fit to Individual b. Meets or exceeds NFPA 1971-2018 Edition Standards c. Outer Shell Material: 6.9 oz Kombat Flex Gold or equivalent, Gold in Color, material shall be brand name or equivalent. Outer shell shall contain liner retention snaps to prevent movement of liner under outer shell. d. Thermal Liner: Glide Ice 2 Layer 60% NOMEX 40% NOMEX/LENZING FR blend. Extra layer of thermal liner in high compression areas of elbow and shoulders e. Moisture Barrier: STEDAIR 4000 NOMEX non-woven pajama check 5.5 oz/yd2, Lightweight, breathable, detachable. Material shall be brand name or equivalent. f. Reflective Trim: 3M Scotchlite Reflective Triple Trim (NYC Style 3"" Lime/Yellow with Silver Center) g. Coat FRONT 1. Standard Hooks and Dee with Velcro interior closure 2. Flashlight strap on right chest with large hook above 3. Radio pocket on left chest with flap and mic tab above 4. Mic tab on left collar edge 5. Side pockets with hand warmers g. Coat BACK 1. ""U.S. ARMY"" Stitched in Reflective Lime/Yellow Lettering along upper coat back. Approx 3"" Letters 2. Rapid Rescue Drag strap 3. Name (i.e. John Doe) ""J. DOE"" Stitched in Reflective Lime/Yellow Lettering along extended lower rear coat tail h. Coat SLEEVE 1. Wristlets with thumb tabs 2. USA Flag patch on upper right arm with stars forward as per military protocol Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, EA; LI 006: PANTS, STRUCTURAL FIREFIGHTING Pant shall be brand name or equal to Fire Dex FX-R with a 6.9 oz Kombat Flex outer shell, Glide Ice 2 Layer and Stedair 4000 Moisture Barrier a. Custom Sized and Fit to Individual b. Meets or exceeds NFPA 1971-2018 Edition Standards c. Outer Shell Material: 6.9 oz Kombat Flex Gold or equivalent, Gold in Color, material shall be brand name or equivalent. Outer shell shall contain liner retention snaps to prevent movement of liner under outer shell. d. Thermal Liner: Glide Ice 2 Layer 60% NOMEX 40% NOMEX/LENZING FR blend. Extra layer of thermal liner in high compression areas of knees. e. Moisture Barrier: STEDAIR 4000 NOMEX non-woven pajama check 5.5 oz/yd2, Lightweight, breathable, detachable. Material shall be brand name or equivalent f. Reflective Trim: 3M Scotchlite Reflective Triple Trim (NYC Style 3"" Lime/Yellow with Silver Center) g. LEGS 1. Reinforced Boot Cut Cuffs 2. Left and Right Leg Cargo Pocket h. KNEES 1. Color match to outer shell fabric, padded, Seam to Seam i. SUSPENDERS, H-back, Thermoplastic Cam Lock to adjust length closure, with hook and loop front and back pant attachment Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, EA; LI 007: GLOVES, STRUCTURAL FIREFIGHTING SHELBY STRUCTURAL GLOVES 5282G a. Custom Sized and Fit to Individual b. Gauntlet (Short Cuff) Length c. Moisture Barrier Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, PAIR; LI 008: BOOTS, STRUCTURAL FIREFIGHTING Honeywell PRO 5050 Struximity Leather Boots a. Custom Sized and Fit to Individual b. Black Leather 14� Pull on Construction c. NFPA 1971 and 1992 Compliant d. Composite Safety Top Cap e. Composite Shank f. Molded Shin Guard Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, PAIR; LI 009: BAG, FIREFIGHTING GEAR Thin Ari Defender deployment Bag - Black, 38, EA; LI 010: WOLFPACK GEAR ALPHA 17 Pack, 19, EA; LI 011: HELMET, WILDLAND FIREFIGHTING Bullard Wildland Fire Helmets NFPA 1977', 19, EA; LI 012: BOOTS, WILDLAND FIREFIGHTING Honeywell PRO Series Wildland BT3050B a. Custom Sized and Fit to Individual b. Black Leather 14� Pull on Construction c. NFPA 1971 and 1992 Compliant d. Composite Safety Top Cap e. Composite Shank f. Molded Shin Guard Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 19, EA; LI 013: SHROUD, WILDLAND FIREFIGHTING Bullard Wildland Fire Shroud R223 NFPA 1977' a. One Size Fits All b. NFPA 1971 and UL Certified. Meets or exceeds OSHA Standards c. Nomex Construction d. Color: Black, 19, EA; LI 014: SHIRT, WILDLAND Crew Boss Traditional Wildland Shirt, NFPA 1977 a. Custom Sized and Fit to Individual b. Meets or exceeds NFPA 1977 Standards Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, EA; LI 015: PANTS, WILDLAND Crew Boss Traditional Wildland Pants, NFPA 1977 a. Custom Sized and Fit to Individual b. Meets or exceeds NFPA 1977 Standards Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, EA; LI 016: BELT, WILDLAND Crew Boss, Ranger Web Belt: WSS BELT, a. custom sized and fit to individual b. Meets or exceeds NFPA 1977 Standards. Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, EA; LI 017: GLOVES, WILDLAND FIRE FIGHTING SHELBY WILDLAND GLOVES 5002 a. Custom Sized and Fit to Individual b. Gauntlet (Short Cuff) Length c. Moisture Barrier Price must include cost of measuring/fitting equipment by equipment manufacturer certified personnel at unit location in the delivery address., 38, PAIR; LI 018: STREAMLIGHT Vantage� LED Helmet-Mounted Light, 19, EA; LI 019: ESS FirePro-FS� Wildland Goggles, 19, EA; LI 020: Foxfury Command 10 White LED Helmet Light, 19, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ff512296a5434d4ca745a4d0f3cf8ccc/view)
- Place of Performance
- Address: Special Shipping Instructions.
- Record
- SN06455790-F 20220909/220907230135 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |