SOLICITATION NOTICE
J -- MAINTENANCE FOR BK SCANNING SYSTEM
- Notice Date
- 9/9/2022 11:47:48 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 811219
— Other Electronic and Precision Equipment Repair and Maintenance
- Contracting Office
- NAVAL MEDICAL CENTER PORTSMOUTH VA PORTSMOUTH VA 23708-2297 USA
- ZIP Code
- 23708-2297
- Solicitation Number
- N0018322Q0012
- Response Due
- 9/19/2022 9:00:00 AM
- Archive Date
- 10/04/2022
- Point of Contact
- Luis A. Zeno-Pimentel, Phone: 7579536084, Fax: 7579535006
- E-Mail Address
-
luis.a.zeno-pimentel.civ@mail.mil
(luis.a.zeno-pimentel.civ@mail.mil)
- Description
- PERFORMANCE WORK STATEMENT This contract shall provide full maintenance services for the listed equipment to include any accessories. This contract shall provide for on-site corrective repairs and preventive maintenance from Monday through Friday, between 8:00 A.M. to 4:00 P.M. It shall include systems, system components, and their assembly parts (i.e.: contractor responsible for total maintenance of entire system).� All maintenance provisions shall apply to hardware, firmware, and software, as appropriate, unless otherwise stated. Selected vendor must provide technical assistance through telephone support 24 hours a day, 7 days per week. ��������������������������������������������������������������������������� 1. �General a. The Contractor shall comply with HIPAA and DoD Business Associate Agreement as applicable to the performance of this contract.� b. The Contractor shall be fully qualified / authorized by the Original Equipment Manufacturer (OEM) in the repair of all equipment listed within this contract.� Contractor shall maintain current qualifications throughout entire contract period.� Qualification includes but not limited to the certification of all repair persons and repair facilities by the OEM as being trained / qualified to perform required repairs. 2.� Scope of Work Item Number Serial Number Description 2300-01 5010196 bk3000 Ultrasound System UA2301 Urology Application Pack (Calc&Presets) UA2303 Prost. / Breast Theraphy AppPack UA2323 Dicom (License) UA2327 Varian Interface (License) 9048 9048-3118566 E14CL4b 14-4 MHz Biplane Endocavity Transducer 9048 9048-3118945 EC14CL4b 14-4 MHz Biplane Endocavity Transducer UA2353 7208409 Integrated Printer Start-Up Kit a. The Contractor shall provide trained, experienced, English speaking personnel, labor, tools, diagnostic equipment, software, test phantoms, material, supplies, transportation, parts and equipment necessary to perform Preventive Maintenance (PM), Calibration (CAL), Safety testing (ST) and corrective maintenance. b. The Contractor shall provide telephonic communications with the Government to discuss technical matters relating to the performance of this contract.� The Contractor will provide the name and phone number of a Government point of contact within 5 business days after receipt of award.� A Contractor�s systems operator will be made available to answer technical questions regarding system operations and applications. c. Equipment listed in this contract will be maintained to meet the original equipment manufacturers (OEM�s) specifications. d. The Contractor Point of Contact (POC).� The Contractor shall provide in writing the name and telephone number of a primary and alternate English-speaking individual to act as their representative for the scheduling and coordination of service calls, and to be responsible for the coordination of the contract with the Government. The contractor shall provide contact information within 5 business days after contract award. In the event a replacement is made, the contractor shall provide the replacement�s contact information within 5 business days.� 3.� Government furnished property, Materials and Services. a. The Contractor representative(s) at each site is encouraged to request a pre-maintenance inspection prior to the award of the contract.� As all apparent discrepancies must be identified upon submittal of quote, any and all claims must be received within 30 days of contract award or prior to contract start whichever occurs first.� All non-apparent / hidden discrepancies must be identified no later than the first scheduled preventative maintenance.� Any claims resulting from hidden defects must be received within 30 days of first scheduled preventative maintenance.�� Any equipment found to be inoperable during this pre-maintenance inspection would be repaired using a separate purchase order.� The cost of repairs shall not exceed contractor�s normal retail rate for required repairs.� The government certifies that the equipment to be maintained under this contract will be in good operating condition on the effective date of this contract.� For the purpose of this contract, the clause, �good operating condition� means the conditions necessary for the equipment to function as intended without corrective maintenance.� The Contractor agrees to leave the equipment in good operating condition at the expiration of this contract.� During the final week of this contract, the Government will make final inspection of the equipment.� Any correction of deficiencies noted during this inspection shall be resolved prior to contract end.� The Government reserves the right to request the repair (at no additional cost to the Government) of items identified with latten defects after contract termination, when it has been determined that defects either are a result of contractor�s performance or should have been discovered during normal performance of work under this contract.� b. The government will be responsible for maintaining the proper environment, including utilities and site requirements necessary for the system to function properly as specified by the OEM. c. The Government will operate the system in accordance with the instruction manual provided by the OEM. d. The Government will not be responsible for the damage or loss due to fire, theft, accident, or other disaster of Contractor supplies, materials, or for the personal belongings brought onto Government property by Contractor�s personnel. 4.� Contractor Furnished Property and Material. a. The Contractor shall provide all service literature, reference publications, laptop computers and diagnostic software to be used by the contractor service technicians and as required for the completion of the services in accordance with this contract. 5.� Replacement Parts. a. The Contractor shall have ready access to unique and/or high mortality replacement parts.� All parts supplied shall be compatible with the existing system.�� In the event that replacements parts are required to be shipped. Shipping shall be performed with Next Day Air at no additional cost to the Government.� If Next Day is not available, then contractor shall ship by the next fastest means. b. The Contractor shall, at their expense, replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM. c. Contractor installed replacement parts shall become the property of the Government and the replaced malfunctioning part shall become the property of the Contractor.� Replaced items shall be properly disposed of at no additional cost to the Government (contractor to pay all �environmental fees� where required). d. Freight, postage, and storage charges associated with shipment and receipt of replacement parts, and the return of parts shall be the responsibility of the Contractor. e. All replacement parts shall be new and certified as OEM replacement parts.� In the event that new parts are not available, the COR must approve the use of rebuilt parts and sub-assemblies prior to ordering and installing. The use of rebuilt parts is allowed provided that they are warranted to be free of defects for a period of time that meets or exceeds warranties of similar replacement parts.� The contractor shall specifically annotate on the final Field Service Report the use and identification of rebuilt parts and the period of warranty.� When discrepancies occur, the Government will make the final determination on whether a replacement part is of equal or better quality. f.� The Contractor must include software revisions and updates (field service changes), which are required due to FDA, or manufacturer announced safety-hazard recall, to include FDA Year 2000 Compliance Directive, as part of the contract at no additional cost to the Government.� Updates shall be performed as soon as possible after release, but no later than the first scheduled Preventative Maintenance Inspection after release.� For any updates that have been identified as critical, or required for the proper operation of equipment by the OEM, contractor shall provide installation within 30 days of release regardless of Preventative Maintenance Schedules.�� 6.� Contractor Report Requirements. a. During normal duty hours, Contracted Field Service Engineer (FSE) personnel shall check-in with the Biomedical Engineering Division upon arrival at the Government site and again prior to departure.� (Biomedical Engineering located in Build-250 1st floor; 757-953-5336). The Contractor FSEs shall personally notify Biomedical Engineering (BME) of problems that result in the equipment being left disabled upon their departure.� After normal duty hours, Contractor FSE�s shall notify the duty Biomedical Engineer (BME) via cell phone 757-544-4506 to provide status of service performed, including PMs and corrective maintenance.� b. The Contractor shall provide to BME a full service report within two (2) days after completion of all service performed.� The service report shall include, but not be limited to:� contract number, equipment description (model, serial number, equipment control number) contractor�s log number, detailed description of the service(s) performed, replacement part(s) information (part number, value, nomenclature, unit price, manufacturer, if not OEM, and whether the part is new/used/reconditioned), the completion date and time, man-hours expended and the hourly rate normally charged for the type of service performed, model and serial numbers, and the name of the FSE performing the service.�� In the event that agents / sub-contractor�s are used in the performance of repairs, said agent shall be identified on the service report by company name and contact information (i.e., telephone number).� Additionally contractor will be required to affix a tag on equipment upon the completion of a preventative maintenance inspection.� Tag may either be a �sticker� or �hanging tag�.� As a minimum the tag shall contain: the name of the contractor, technician performing inspection and date of inspection legibly printed. 7.� Contractor Responsibility. a. The Contractor shall be responsible for the repair/replacement of damaged Government owned equipment and property due to the negligence of the Contractor or his representatives.� All such replacement or repair shall be at the Contractor�s expense and shall be inspected to the satisfaction of the KO or appointed representative. 8.� Preventive Maintenance Services. a. In accordance with Naval Medical Logistics Command (NAVMEDLOGCOM) Risk Assessment Criteria, preventive maintenance shall be performed in accordance with the Original Equipment Manufacturer�s (OEM) recommendations.� b. The preventive maintenance visits shall be performed FOLLOWING A MUTUALLY AGREED UPON SCHEDULE The Contractor shall schedule and complete preventive maintenance services prior to the 15th of the selected month(s) � OCTOBER ��������������� c. During each scheduled preventive maintenance visit performed during the Base and each Option Year, the Contractor shall replace all worn or defective parts as required to complete the preventive maintenance.� d. All test equipment used in the performance of this contract must be calibrated (if required / as required by manufacture of test equipment) and shall be in compliance with Joint Commission on Accreditation of Healthcare Organizations (JCAHO), Original Equipment Manufacturer (OEM) and Federal Drug Administration (FDA) standards as required by Bureau of Medicine and Surgery (BUMED) Equipment Management Manual NAVMED P-5132 (CH-1, rev.1-2008). 9.� Corrective Maintenance a. Normal Working Hour Maintenance Coverage Maintenance Coverage will be Monday through Friday, between 8:00 A.M. to 4:30 P.M.� A contractor Service Tech shall respond via telephone within 2 hours after receipt of trouble call, and provide on-site service no later than the close of business (4:30 pm) on the next business day. Equipment shall be operational within 48 hours. b. Government request for corrective maintenance will be placed by BME, to the Contractor�s POC.� Corrective Maintenance shall be completed during the hours specified in the contract. c. The Contractor shall assign a unique Log/Reference Number to each Government request for Corrective Maintenance. d. Contractor�s response to requests for service may include telephone consultation with the equipment user/operator and a Contractor FSE.� Telephone consultation shall: 1) provide instruction in determining operator error; 2) determine the most likely cause of the problem; 3) determine if resolution of the problem requires the dispatch of a FSE; and 4) identify replacement parts likely to be required in order to return the equipment to 100% operational condition as specified by the OEM.� e. Contractor�s pricing shall be inclusive of all cost including parts, labor, travel and shipping. f. The Contractor shall have his/her own service manuals, specifications, schematic diagrams, and parts lists to assist in the evaluation/repair of all equipment included in this contract. 10.� Removal of Government Property a. Whenever the repair of equipment cannot be performed at the Government site as determined by the Contractor, the Contractor shall notify BME who will make arrangements for the Contractor to remove the item to the Contractor�s designated site.� The Contractor will be required to sign a Government form accepting responsibility for the Government equipment.� The Contractor shall provide a detailed description and quantities of items to be removed.� Description shall include manufacturer�s serial numbers and equipment control number (ECN).� In the event that items / sub-assemblies / accessories are repaired via �Repair by Replacement� a detailed description of replaced items is to be included upon return of repaired components. b. In the event that that contractor determines the equipment must be moved to an alternate location for repair, the Contractor is responsible for transporting the equipment to the alternate location and returning the repair equipment back to the Government site. 11.� Equipment Modification Upgrades a. The Contractor shall only incorporate OEM specified modifications, alterations and upgrades.� Approval shall be obtained from BME COR prior to the Contractor installation of any modification, alteration, or upgrades. b. The Contractor shall maintain contact with the OEM to determine the requirement for field modifications and to ensure accomplishment of these modifications in accordance with the time schedule set forth by the OEM. c. The Government shall not alter the system without prior notification to the Contractor. d. The contractor shall provide software updates to the Government.� Installation of updates will be left to the discretion of the Government.� All supplied software is to be warranted current and free of defects such as viruses.� 12.� Service beyond the Scope of the Contract a. The Contractor shall immediately, but not later than 24 consecutive hours after discovery, notify BME, in writing, of the existence or the development of any defects in, or repair required to the scheduled equipment, which the Contractor considers they are not responsible for under the terms of this contract. The Contractor shall state why this existence or development is not within scope.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/54fdfef0c319438d951b850da8ed348e/view)
- Place of Performance
- Address: Portsmouth, VA 23708, USA
- Zip Code: 23708
- Country: USA
- Zip Code: 23708
- Record
- SN06459120-F 20220911/220909230127 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |