SOLICITATION NOTICE
68 -- Purchase of five superalloy powders
- Notice Date
- 9/14/2022 5:06:03 AM
- Notice Type
- Solicitation
- NAICS
- 331492
— Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)
- Contracting Office
- NASA SHARED SERVICES CENTER STENNIS SPACE CENTER MS 39529 USA
- ZIP Code
- 39529
- Solicitation Number
- 80NSSC22815274Q
- Response Due
- 9/21/2022 11:00:00 AM
- Archive Date
- 10/06/2022
- Point of Contact
- Kimberly Sandoz
- E-Mail Address
-
kimberly.r.sandoz@nasa.gov
(kimberly.r.sandoz@nasa.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Various Superalloys Powder for Additive Manufacturing � Background � The Government requires 150 pounds each of five superalloys for evaluation of additive manufacturing capabilities using laser powder bed fusion. �Requirements � The Contractor shall provide one hundred fifty (150) pounds of each of the five powder alloys (750 pounds total) that meets the following requirements � 1.�� �The powder shall be between 10 and 50 microns in diameter (D10 and D90, respectively). The range may be tighter, but it may not exceed these two limits. Fines (<1 micron) shall make up no more than 5% by volume with a target of <1% by volume. 2.�� �The powder must be free of satellites and contamination that will impede flow during additive manufacturing with an EOS M290 or equivalent 3D printer. 3.�� �The nominal compositions of the powders shall be (in wright percent): See RFQ for details of the Superalloy Powders
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9aab2d3890a945d48c3de27bb8366501/view)
- Place of Performance
- Address: Cleveland, OH 44135, USA
- Zip Code: 44135
- Country: USA
- Zip Code: 44135
- Record
- SN06465605-F 20220916/220914230137 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |