SOLICITATION NOTICE
49 -- 49--MH-60R Peculiar Support Equipment Package
- Notice Date
- 9/21/2022 1:30:25 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N68335-22-Q-0257
- Response Due
- 9/28/2022 12:00:00 PM
- Archive Date
- 03/27/2023
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N68335-22-Q-0257 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-09-28 15:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions. The NAWC-AD Lakehurst requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: HOT SECTION WASH NOZZLE, p/n: 18D8532-1, 4, ea; LI 002: INSTALLATION/REMOVAL TOOL HINGE BUSHING, p/n: 3218AS203-1, 1, ea; LI 003: SET,BELLCRANK BUSHING PULLER, p/n: 3218AS401-1, 1, ea; LI 004: COMMON IMD TOOL SET, p/n: 3218AS450-1, 2, ea; LI 005: TORQUE REACTOR, p/n: 3218AS500-1, 1, ea; LI 006: ACCUMULATOR DAMPER SERVICING LINES, T3, p/n: 3218AS538-1, 1, ea; LI 007: ACCUMULATOR DAMPER SERVICING LINES,T6, p/n: 3218AS538-2, 1, ea; LI 008: SERVICE ADAPTER,PRESSURE, T-3, p/n: 3218AS551-1, 1, ea; LI 009: SERVICE ADAPTER,PRESSURE, T-5, p/n: 3218AS551-2, 1, ea; LI 010: RETURN ADAPTER, T-3, p/n: 3218AS552-1, 1, ea; LI 011: RETURN ADAPTER, T-5, p/n: 3218AS552-2, 1, ea; LI 012: MRH CENTERING SOCKET CROWFOOT WRENCH, p/n: 3218AS569-1, 1, ea; LI 013: MRH CENTERING SOCKET HUB PROTECTOR, p/n: 3218AS570-1, 1, ea; LI 014: ON-665/USQ-131B INTERCONNECTING GROUP, p/n: 3359AS857-1, 1, ea; LI 015: HIGH SPEED SHAFT SET, p/n: 3909AS1035-2, 2, ea; LI 016: STRUT, STINGER, RHEP, p/n: 3909AS1865-1, 21, ea; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a quote on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. Bid MUST be good for 60 calendar days after close of Buy. Shall be performed at the Government facility. Payment will be provided once invoices are submitted through the Government's Wide Area Workflow system at https://wawf.eb.mil/. Payment terms: Net 30 days. No contract financing will be provided for this effort. This request neither implies nor requests the commencement of any effort. Further, the Government shall incur no obligation whatsoever as a result of this proposal request if a contract is not executed. DFARS 252.211-7003 Item Unique Identification and Valuation applies to this procurement Completed items will be shipped to the following address: DODAAC: SW310N DLA Distribution Susquehanna, PA Mechanicsburg Receiving West 5450 Carlisle Pike Building 402 Mechanicsburg, PA 17050-0789 Mark for: Program RIC: 55K and IOM: TBD Provision 252.204-7019, Notice of NIST SP 800-171 DoD Assessment Requirements (NOV 2020) Clause 252.204-7020, NIST SP 800-171 DoD Assessment Requirements (NOV 2020) Provision 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment FAR clause 52.204�25, Prohibition on Contracting DFARS Clause 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting Award will be made to the responsible offeror who is considered the lowest price technically acceptable offeror. In order for the offeror to be found technically acceptable, the offeror must be considered a small business under the NAICS c ode of the solicitation in accordance with their representations and certifications in beta.sam.gov. The offeror must demonstrate in their quote the exact part numbers and quantities required. The offeror must demonstrate in their quote a delivery date of one hundred twenty (120) days after receipt of offer (ARO). The offeror must have an acceptable or neutral past performance in the Supplier Performance Risk System for the Federal Supply Class and Product Service Code of the supplies being purchased. The offeror must have a current NIST-SP 800-171 assessment in the Supplier Performance Risk System as per DFAR Provision 252.204-7019 and DFAR Clause 252.204-7020. Interested parties shall submit a request for a drawing package to tamara.fossa@navy.mil no later than Wednesday 7 September 2022, 5 PM EASTERN. Late requests will be considered at the Government's discretion. Drawings shall be delivered via DOD Safe to the vendor's secure data custodian listed on the DD Form 2345 on the next working day after the closing date of drawing requests. When requesting the drawings please provide the approved and current DD 2345.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/2a1fd3f1ab8643ebb54ebdb270dae5a1/view)
- Place of Performance
- Address: Special Shipping Instructions.
- Record
- SN06474002-F 20220923/220921230138 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |