SOLICITATION NOTICE
66 -- Electromagnetic Test Inspection System
- Notice Date
- 10/4/2022 8:30:47 AM
- Notice Type
- Presolicitation
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- W6QK ACC-PICA PICATINNY ARSENAL NJ 07806-5000 USA
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-23-Q-0001
- Response Due
- 10/11/2022 1:00:00 PM
- Point of Contact
- Elizabeth A. Horak, Phone: 9737245369
- E-Mail Address
-
elizabeth.a.horak2.civ@army.mil
(elizabeth.a.horak2.civ@army.mil)
- Description
- The U.S. Army Contracting Command � New Jersey (ACC-NJ) on behalf of the Combat Capabilities Development Command (DEVCOM) Armaments Center (AC) intends to issue a sole source Request for Quote, W15QKN-23-Q-0001 to ZETEC Inc. 8226 Bracken PL SE STE100, Snoqualmie, Washington 98065, CAGE Code 51327 pursuant to 13.106-1(b)(1)(i) for Electromagnetic Test Inspection System. The Quality Engineering & System Assurance (QE&SA) Directorate requires an electromagnetic test system with conventional eddy current, eddy current array, conductivity, near/remote field, and magnetic flux leakage capabilities, with necessary hardware and software to inspect a vast range of components to high precision.� This electromagnetic system will provide a robust capability to effectively and efficiently inspect weapon and munition system components as well as a variety of hardware components produced by the DEVCOM AC Prototype Integration Facility (PIF). The contractor will provide a minimum of 12 hours virtual training based on the user manual and Usability Testing. There is only one known source for this requirement.� The resultant contract shall be awarded as a twelve (12) month, Firm Fixed Price purchase order. The applicable NAICS Code for this is 334515. The contractor shall provide an electromagnetic system and with the following minimum capabilities: The system shall consist of both a (1) stationary electromagnetic test instrument and a (2) hand held portable electromagnetic instrument. The stationary electromagnetic test instrument shall have the following at a minimum capability: - Transportation case - Support eddy current testing with the following minimum capabilities: --Frequency range of at least 5Hz to 4MHz --Supports 7-pin LEMO connection -Support eddy current array testing with the following minimum capabilities: --Frequency range of at least 5Hz to 4MHz --Utilizes encoder for C-Scan capability -Supports near/remote field testing -Supports magnetic flux leakage testing -Software package with the following minimum capabilities: --All necessary licenses to perform inspections --Supports data analysis and display of both the portable and stationary units. --Supports custom surface array probes --Generates inspection reports --Perform inspections with: ---Filters: Median, High Pass, and Low Pass ---Alarms: Audible and visual ---Alarm type: adjustable box, sector, and polar 3.1.2��� The hand held portable electromagnetic test instrument shall have the following at a minimum: - Battery life of at least 10 hours - AC rechargeable - Water resistant - Carrying case - Filters: Median, High Pass, and Low Pass - Alarms: Audible and visual - Alarm type: adjustable box, sector, and polar - USB connectivity - Support eddy current testing with the following minimum capabilities: -- Frequency range of at least 5Hz to 4MHz -- Supports 7-pin LEMO connection - Support eddy current array testing with the following capabilities: --Frequency range of at least 5Hz to 4MHz --Utilizes encoder for C-Scan capability - Support conductivity testing with the following capabilities: --1-100% IACS readout --At least +/- 1% IACS accuracy over the entire range --Supports 7-pin LEMO connection - The system will also come equipped with the following: --Eddy current probe kit --Encoders --Flexible eddy current array surface inspection probes --Flexible eddy current array weld inspection probes --Conductivity Probes This is a Pre-Solicitation notice, and the Government anticipates the release of a Request for Quote (RFQ) to ZETEC on/about 11 Oct 2022. Any information or exchanges between contractors and the Government concerning this notice are at no additional cost and/or obligation to the Government. THIS SYNOPSIS DOES NOT CONSTITUTE A REQUEST FOR QUOTE (RFQ). Further, this synopsis does not guarantee of a future RFQ and should not be construed as a commitment of any kind by the U.S. Government. Responses to this synopsis are not considered proposals/quotes, and, cannot be accepted by the Government to form a bidding contract. Primary Point of Contact: Elizabeth A. Horak elizabeth.a.horak2.civ@army.mil Phone: 973-724-5369 Contracting Office Address: Building 9 Phipps Rd Picatinny Arsenal, NJ 07806-5000 United States Place of Performance: Picatinny Arsenal, NJ 07806-5000
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/69c3c123fcce45d492ef5453a764a850/view)
- Place of Performance
- Address: Picatinny Arsenal, NJ 07806, USA
- Zip Code: 07806
- Country: USA
- Zip Code: 07806
- Record
- SN06486515-F 20221006/221004230123 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |