SPECIAL NOTICE
43 -- 39 CES Compressors Single Source Justification
- Notice Date
- 11/4/2022 12:25:54 AM
- Notice Type
- Justification
- NAICS
- 333912
— Air and Gas Compressor Manufacturing
- Contracting Office
- FA5685 39 CONS LGC APO AE 09824-0127 USA
- ZIP Code
- 09824-0127
- Solicitation Number
- FA568522P0039
- Archive Date
- 12/04/2022
- Point of Contact
- Lt. Zachary Ashley, Phone: 011903223163994, SSgt Stephen Barter
- E-Mail Address
-
zachary.ashley.2@us.af.mil, stephen.barter@us.af.mil
(zachary.ashley.2@us.af.mil, stephen.barter@us.af.mil)
- Award Number
- FA568522P0039
- Award Date
- 09/29/2022
- Description
- This contract has been awarded as a sole source IAW FAR 13.5. - Bauer Model UN4i/25-E3, five stage, air cooled, pressure lubrication high pressure compressor - Maximum working pressure: 6000 psi Application working pressure: To be advised - Charging Rate: 25.2 SCFM Tolerance on capacity +/- 5%. - E-stop button - BAUER 15-inch HMI touch-screen interface Compressor low oil & high temperature safety shutdowns - FAD3 SCFM: 21.0 - Charging Rate4 SCFM: 25.2 - HP: 20 - RPM: 1300 - Compressor Model: K18.1 II - Purification System: P5 Securus - Air Processing Capability5 (cu ft): 150,000 - The aftercooler shall be designed to cool the discharge air to within 18�F of ambient temperature. The compressor control panel shall include an across-the-line magnetic motor starter, 24-volt DCcontrol power supply and PLC controller. The control panel shall be built in accordance with UL 508A, the standard for Industrial Control Panels and shall be affixed with a UL label. The label shall also include unit data including the unit serial number, date of manufacture, system voltage and electrical phase. - Breathing air station to refill self-contained breathing apparatus (SCBA) cylinders with purified air that meets or exceeds the requirements of CGA Pamphlet G-7, Compressed Air for Human Respiration, the requirements of ANSI/CGA G-7.1, Commodity Specification for Air, Grade E, and all other recognized standards for respirable air. - The station shall be designed for a maximum working pressure of 6,0001 PSIG. The Manufacturer shall operate under a Quality Management System which complies with the requirements of ISO 9001:2015 for the design, manufacture, inspection, test, and service of air & gas compressors and associated spare parts for commercial and military applications. - The air storage system shall include two receivers fabricated, tested and stamped in accordance to Section VIII of the ASME Boiler and Pressure Vessel Code. The receivers shall have a 3:1 safety factor at 6000 PSIG (7000 PSIG MAWP at 200�F).8 Each receiver shall have a capacity of 491 cu ft at 6000 PSIG9. � A NEMA type 4 electrical enclosure � UL electrical panel � A 15 � Human Machine Interface (HMI) multi color screen display shall be provided on the control operations panel � Home screen customizable with distributor contact information � Compressor on / off � Digital Display of Compressor Final Pressure � Digital Display of Compressor Oil Pressure � Digital Display of current Compressor Run Time � Digital Display of Final Separator Cycle Count � Compressor High Temperature Shutdown and Alarm � Full support of the Automatic Condensate Drain system (interval and duration set points adjustable thru the HMI - password protected) � Digital Display of time to next ACD Cycle � Condensate Drain Reservoir full alarm � Full support of CO monitor alarm functions � Full support of the automatic cascade control system � Full support of Tiered operator password security levels � Full support of SECURUS purification system moisture monitor warning and alarm functions � Built in overtime timer set at 5 hours - optional times available � Maintenance Timer (selectable between real time or compressor run time) to give Digital Display of all needed Preventative Maintenance Evolutions � Motor overload alarm � Nonresettable hourmeter � Recoverable Run History (last 5 run periods) � Recoverable Alarm History (last 5 fault shutdowns) � Support of up to 5 Languages (to be specified at time of order; includes English, French, Spanish & Portuguese) � Operator choice of display in BAR or PSI - PLC has removable Terminal Blocks for all connections - EEPROM (Electrically Erasable Programmable Read-Only Memory) upgrade capability - Support of optional remote communication protocols o Via broadband cellular router; 3G and or 4G - The system wiring shall be encapsulated within a flexible braided cover. Each wire end connection shall be machine crimped and numbered -The HMI shall have adjustable system parameters secured by password protection. The HMI will provide display of all safety / fault shutdowns with a text read-out of the potential cause/s for the fault / shutdown.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/3e7ca29f73f34c8caf8e179923885ced/view)
- Place of Performance
- Address: Incirlik AB, Adana 01340, TUR
- Zip Code: 01340
- Country: TUR
- Zip Code: 01340
- Record
- SN06510093-F 20221106/221104230054 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |