SPECIAL NOTICE
66 -- Notice of Intent: Sensofar Optical Profilometry System
- Notice Date
- 11/16/2022 7:28:35 AM
- Notice Type
- Special Notice
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
- ZIP Code
- 20899
- Solicitation Number
- NB643090-23-00117
- Response Due
- 11/28/2022 10:00:00 AM
- Point of Contact
- Rudolph Spencer, Donald Graham, Phone: 3019758567
- E-Mail Address
-
rudolph.spencer@nist.gov, donald.graham@nist.gov
(rudolph.spencer@nist.gov, donald.graham@nist.gov)
- Description
- The National Institute of Standards and Technology (NIST) intends to negotiate on a sole source basis, under the authority of FAR 13.106-1(b) (1), with the Brook Anco Corporation, 7536 W Murray DR, Cicero, New York 13039.� The sole source justification is based on the following:� The Materials Measurement Science Division (MMSD) is developing a Reference Material (RM) for the calibration and validation of optical profilometry tools.� Since a major goal for the RM under development is functionality in all three major classes of optical profilometry metrology (interferometry, confocal, and focus variation), NIST requires a profilometer that is simultaneously capable of all three methods.� Additionally, since the tool will be used extensively for the development and certification of reference materials, the uncertainty, repeatability, and traceability requirements are stringent and essential.� This requirement is for the delivery of one (1) profilometry system and includes installation and warranty requirements. The Sensofar S Neox optical profilometry system is the only system identified through extensive market research that offers a system that meets NIST specifications (See below). �Brook Anco Corporation is the only authorized reseller for Sensofar equipment in the United States. SPECIFICATIONS The Contractor shall provide one (1) Sensofar S neox optical profilometery system that meets the following minimum technical requirements.� The Contractor shall install the instrument and provide training as described below. Minimum System Requirements: Required Components S neox 3D Optical Profiler with Piezo Interferometric Objectives 10� 20� 50� Brightfield Objectives 5� 0.15NA 10� 0.30NA 20� 0.45NA 50� 0.80NA 150� 0.90NA Motorized tip-tilt stage Motorized XY Stage 154 mm � 154 mm travel Flat plate insert Wafer rotary plate insert Adjustable stand for coarse positioning of optical head Active vibration isolation base SensoSCAN control software including Basic operational control of the system Automating procedures module Extended measurement module SensoMAP analysis software including Mountains Premium v9 Network licensing option to allow multiple PCs to run mountains (one at a time) from the served network license. Required Operational Modes with Performance Requirements Coherence Scanning Interferometry (CSI) Uncertainty: � 10 nm at 95% confidence interval for a 1000 nm step height Repeatability: standard deviation of less than 3 nm for n = 25 Phase Scanning Interferometry (PSI) Uncertainty: � 0.5 nm at 95% confidence interval for a 10 nm step height Repeatability: standard deviation of less than 0.1 nm for n = 25 Microarray Confocal Microscopy Speed: 180 frames per second at 1224 � 1024 pixels Focus Variation Microscopy Given these facts, Brook Anco Corporation, is the only source available to fulfill this requirement. The resulting purchase order will be a Firm Fixed Price purchase order.� No solicitation package will be issued. This notice of intent is not a request for competitive quotations; however, interested parties who regard themselves as capable of fulfilling these requirements are invited to submit responses to the Government for consideration. Responses received by 1:00 pm EST November 28, 2022, will be considered by the Government. Responses must be submitted via email to the Government point of contacts listed below.� A determination by the Government not to compete the proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.�
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/45a8ebaed3bc46fab95e39e32b5bb220/view)
- Record
- SN06519164-F 20221118/221116230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |