SAMDaily.us | PRESOL | 89 | 89--Cheese 2ND QTR FY23

SAMDAILY.US - ISSUE OF DECEMBER 08, 2022 SAM #7678
SOLICITATION NOTICE

89 -- 89--Cheese 2ND QTR FY23

Notice Date: 12/6/2022 7:24:41 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 311513 — Cheese Manufacturing
Contracting Office: FCI CUMBERLAND CUMBERLAND MD 21502 USA
ZIP Code: 21502
Solicitation Number: 15B10723Q00000009
Response Due: 12/16/2022 9:00:00 AM
Archive Date: 06/14/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 15B10723Q00000009 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 311513 with a small business size standard of 1,250.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-12-16 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Cumberland, MD 21502 The FCI CUMBERLAND FEDERAL CORRECTIONAL INSTITUTION requires the following items, Meet or Exceed, to the following: LI 001: American Cheese, Sliced, (Real Cheese, Not Imitation), As specified in the Code of Federal Regulations, TITLE 21,CHAPTER I, SUBCHAPTER B, PART 133 ?? CHEESES AND RELATED CHEESE PRODUCTS , Subpart B,133.173 , One of the following cheeses, (To be determined by the FSA), Pasteurized Process Cheese American, Cheddar, Provolone, Swiss, Colby, or Monterey Jack . Each of the ingredients used in the food shall be declared on the label. Manufacturer�s letters will NOT be accepted in lieu of labeling., 500, lb; LI 002: Cheese, Cheddar, U.S. Grade AA or A, CID?A?A?20208C, Type I ? Cheddar cheese (21 Code of Federal Regulations (CFR) �133.113), Style A, B, D , K (loaf, shredded coarse), Shred size 1, 2, or 3, Agricultural practice (a).�Cheddar cheese� is cheese made by the cheddaring process or by another procedure which produces a finished cheese having the same physical and chemical properties as the cheese produced by the cheddar process and is made from cow's milk with or without the addition of coloring matter and with common salt, contains not more than 39 percent of moisture, and in the water?free substance, contains not less than 50 percent of milk fat and conforms to the provisions of �19.500, �Definitions and Standards of Identity for Cheese and Cheese Products.� Food and Drug Administration (21 CFR 133.113). Manufacturer�s letters will NOT be accepted in lieu of labeling (Bidder needs to indicate if cheese is Loaf/Block or Shredded Coarse). Packaging: 5 lb to 40 lb sealed Bags or containers., 1500, lb; LI 003: Cheese, Mozzarella, Low?moisture Mozzarella, Part?skim Mozzarella, Low?moisture Part?skim Mozzarella. (CID?A?A?20248C) The mozzarella cheese must conform to the following list. Type I, II, III, or IV. Style A ? Block (loaf), frozen, Style B ? Shredded, individually quick frozen (IQF) or Style J ? Sliced or Diced forms. Shred size 1,2, or 3. Agricultrual practice a. Milk fat range between 30.0 to 45.0 to 60.0 % on a dry basis depending on type. Moisture content range between 45.0 to 60.0 % depending on type. All ingredients must be declared by their common or usual name in descending order of predominance by weight. Manufacturer�s letters will NOT be accepted in lieu of labeling. Type and Style to be determined locally and size noted on bid. Packaging of Primary Container: 5 lb to 40 lb sealed Bags or container, 1000, lb; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FCI CUMBERLAND FEDERAL CORRECTIONAL INSTITUTION intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. FCI CUMBERLAND FEDERAL CORRECTIONAL INSTITUTION is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. As defined in the Federal Acquisition Regulation (FAR) 2.101, the terms �offer� and �offeror� refer to a response to a solicitation that, if accepted, would bind the submitter to perform the resultant contract. The terms �bid� and �bidder� refer to an offer submitted in response to an Invitation for Bid (IFB). The term �proposal� refers to an offer submitted in response to a Request for Proposal (RFP). The terms �quotation,� �quote,� and �quoter� refer to a non-binding submission in response to a Request for Quotation (RFQ) which is not an offer. Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid/Proposal/Quotation individual pricing for all required line items in order to be considered for award (i.e., Do not use the ?Included in another line item? function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid ?Submit a Question? feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid/Proposal/Quotation being determined to be unacceptable. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid/Offer MUST be good for 60 calendar days after close of Buy, unless otherwise indicated. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). The Contracting Officer will indicate elsewhere in this Buy as to whether responses will be evaluated for award based either upon (a) price and pricing factors only (Bids/Quotes) or (b) price and other factors (Proposals/Quotes). All Bids/Proposals/Quotations must conform to the listed specifications or the Statement of Work. If award criteria are based upon (b) price and other factors, the Contracting Officer shall clearly indicate the criteria to be applied elsewhere in this Buy. In addition to providing pricing at www.UnisonMarketplace.com for this solicitation, each Bidder/Offeror/Quoter must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this Buy. Submissions can be sent to marketplacesupport@unisonglobal.com. For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The Bidder/Offeror/Quoter may not substitute any item/service listed on this order without prior written approval from the BOP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this Buy. Items/services that do not conform to descriptions and part numbers found in this Buy will be rejected at the time of delivery causing a return at the contractor's expense. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may result in non-consideration of the Bid/Proposal/Quotation. This information is REQUIRED in order for a seller�s Bid/Proposal/Quotation to be evaluated for award. FAR 52.211-6.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/cb5a98ee36e34ca3a677d65ec8c5b63c/view)
Place of Performance: Address: FCI Cumberland 14601 Burbridge Road SE, Cumberland, MD 21502, USA; Zip Code: 21502; Country: USA
Record: SN06536476-F 20221208/221206230059 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

89 -- 89--Cheese 2ND QTR FY23