SOLICITATION NOTICE
49 -- 49--MISC mechanics tools
- Notice Date
- 12/7/2022 6:05:25 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333991
— Power-Driven Handtool Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- RAALLRCJKL0002
- Response Due
- 12/7/2022 2:00:00 PM
- Archive Date
- 06/05/2023
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is RAALLRCJKL0002 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-12-07 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Redstone Arsenal, AL 35898 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: INGERSOLL-RAND 383-125 1 1/8-in NEEDLE SCALER, 2, EA; LI 002: DYNABRADE 18258 DYNAZIP DECAL ERASER TOOL, 1, EA; LI 003: SNAP-ON PT200A DIE GRINDER, 2, EA; LI 004: SNAP-ON PT2010A ANGLE DIE GRINDER, 2, EA; LI 005: KTI KTI0814 JUMBO WRENCHES ASSORTMENT>>CONSISTS OF 11 different Jumbo Wrenches sized from 1-3/8"" to 2-1/2"" include the following: KTI41144 Jumbo combination wrench 1-3/8"" KTI41146 Jumbo combination wrench 1-7/16"" KTI41148 Jumbo combination wrench 1-1/2"" KTI41152 Jumbo combination wrench 1-5/8"" KTI41156 Jumbo combination wrench 1-3/4"" KTI41160 Jumbo combination wrench 1-7/8"" KTI41164 Jumbo combination wrench 2"" KTI41168 Jumbo combination wrench 2-1/8"" (bulk) KTI41172 Jumbo combination wrench 2-1/4"" (bulk) KTI41176 Jumbo combination wrench 2-3/8"" (bulk) KTI41180 Jumbo combination wrench 2-1/2"" (bulk), 1, EA; LI 006: ATD TOOLS FMRBATD-6405 22 PC 3/4"" DR DEEP AIR IMP SET: Includes: (22) Chrome-Molybdenum Steel 3/4"" Drive Deep Impact Six Point Sockets, Square Socket, Extensions, T-Bar, & Ratchet, All Stored In A Rugged Blow Molded Case. 7/8"" Deep Impact Socket 15/16"" Deep Impact Socket 1"" Deep Impact Socket 1-1/16"" Deep Impact Socket 1-1/8"" Deep Impact Socket 1-3/16"" Deep Impact Socket 1-1/4"" Deep Impact Socket 1-5/16"" Deep Impact Socket 1-3/8"" Deep Impact Socket 1-7/16"" Deep Impact Socket 1-1/2"" Deep Impact Socket 1-5/8"" Deep Impact Socket 1-3/4"" Deep Impact Socket 1-13/16"" Deep Impact Socket 1-7/8"" Deep Impact Socket 2"" Deep Impact Socket 1 Pc. 13/16"" Chrome-Molybdenum Steel 3/4""Drive Deep Impact Square Socket, 1, EA; LI 007: DEWALT DCF899P1 20V Cordless Impact Wrench 5.Ah BL1/2IN IMPACT WRENCH KIT DETENT PIN ANVIL KIT - Includes : (1) DCF899 - 20V MAX* XR� Brushless High Torque 1/2 in. Impact Wrench with Detent Pin Anvil (1) DCB205 - 20V MAX* 5.0 Ah battery (1) Charger, 17, EA; LI 008: DEWALT DCF897P2 Cordless Impact Wrench Drive Size 3/4 In. Drive Configuration Straight Max Torque 700 ft.-lb. IncludeS: (1) DCF897 - 20V MAX* XR� Brushless High Torque 3/4"" Impact Wrench With Hog Ring Anvil - Tool (2) DCB205 - 5.0 Ah batteries (1) Multi voltage charger, 2, EA; LI 009: REVERSO OP-7-P-12 Portable Oil Change System: a portable fast lube oil change system (FLOCS) mounted to an easy-carry base. 12V Pump w/Switch 3 GPM, 1, EA; LI 010: LINCOLN 3635 FLUID DRAIN RED STEEL, 3, EA; LI 011: DEWALT DCGG571M1 20V MAX Lithium-Ion Cordless Grease Gun,14.5 oz,10,000 PSI; Comes w/Hose/Grease, 4, EA; LI 012: DEWALT DCK280C2 DCK280C2 20V MAX Cordless Combo Kit Includes: (1) DCD780 1/2"" Drill/Driver (1) DCF885 1/4"" Impact Driver (2) 20V MAX* Lithium Ion 1.5 Ah Battery Packs (1) Charger (2) Belt Hooks (1) Contractor Bag, 17, EA; LI 013: DEWALT D28715 14"" CHOP SAW WITH QUIK-CHANGE� KEYLESS BLADE CHANGE SYSTEM Includes (1) 14"" Abrasive Wheel (1) Fence Wrench (1) Tool Free Flange System, 1, EA; LI 014: DEWALT DWMT70781L PALM SANDER, 3, EA; LI 015: MILWAUKEE 2864-22 M18 FUEL w/ ONE-KEY High Torque Impact Wrench 3/4"" Friction Ring Kit INCLUDES (1) M18 FUEL w/ ONE-KEY High Torque Impact Wrench 3/4"" Friction Ring Bare Tool(2864-20) (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack(48-11-1850) (1) M18 & M12 Multi-Voltage Charger(48-59-1812), 1, EA; LI 016: Robinair 34988 A/C Recover, Recycle, Recharge Machine, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be ""ACTIVE"" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9d9a043e4a3d4aa3ae19ef43789fc26a/view)
- Place of Performance
- Address: 3631 Roland Rd , Redstone Arsenal, AL 35898-5000, USA
- Zip Code: 35898-5000
- Country: USA
- Zip Code: 35898-5000
- Record
- SN06537489-F 20221209/221207230058 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |