SOURCES SOUGHT
Y -- Design/Build Services for New Building and Sitework for Overhead Lineman and Underground Electrical Trades at the Dr. Benjamin L. Hooks Job Corps Center located in Memphis, TN
- Notice Date
- 12/8/2022 1:17:29 PM
- Notice Type
- Sources Sought
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- JOB CORPS ACQUISITION SERVICES Washington DC 20210 USA
- ZIP Code
- 20210
- Solicitation Number
- 1605AE-23-N-00001
- Response Due
- 12/23/2022 11:00:00 AM
- Archive Date
- 01/31/2023
- Point of Contact
- Bryan N Ramso, Phone: 2026933618
- E-Mail Address
-
ramso.bryan@dol.gov
(ramso.bryan@dol.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The US Department of Labor, Office of Job Corps Acquisition Services, has a requirement for a qualified firm to provide design/build services for New Building and Sitework for Overhead Lineman and Underground Electrical Trades at the Dr. Benjamin L. Hooks Job Corps Center in Memphis, Tennessee.� THIS IS A SOURCES SOUGHT NOTICE.� In accordance with Federal Acquisition Regulation (FAR) 10.002(b) (2) (i), this notice is issued for the purpose of conducting market research.� Market research is being conducted to determine if there are potential businesses with the capacity and experience to perform the required work.� This Notice is not to be misconstrued as an Invitation for Bid or Request for Proposal.� There is no solicitation at this time. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred.� The full extent of the work will be described in the solicitation, which may follow at a later date.� However, a summary of the services to be performed is provided as follows.� The work includes services for the design and construction for the following: The work involves design-build (design and construction) services for a premanufactured training building measuring approximately 60 ft wide, 120 ft long and 40 ft heigh, to be procured and erected per the manufacturer�s design requirements. TASCO Domes are the intended basis for this design. Work includes but is not limited to: �� � � �Grading of approximately one (1) acre of site to accommodate an open field training area,��������������� �� � � �Installation of premanufactured training structure foundation system and concrete slab,� � � � �� �� � � �Installation of premanufactured training structure and utility infrastructure (water, electric, and sewer)� �� � � �Create diversion ditches around site and grade to drain away from training site area.� � �� � � �Seeding and mulching of all newly regraded areas.� � � �� � � �Extend a 12 ft wide access driveway to accommodate H20 truck loading.� � � � �� � � �Provide a metal container for equipment storage. The estimated price range is between $1,000,000 and $5,000,000. Firms interested in this requirement are requested to submit a statement of qualifications.� Your statement of qualifications shall demonstrate the capacity of your firm to perform the services described above, and should include the following information: 1.� �Previous projects of similar scope and value A.� Contractor has provided design-build (design and construction) services on two and more premanufactured training building projects, complete with sitework and paving, between $1M to $5M constructed value within the last five years. Provide previous project examples that include the location of the project (City, State), the project owner, a brief and concise description of the project scope, specialty design consultants employed, a comparison of the construction budget versus construction award value, and the final contract amount. 2.�� Project Location Contractor has completed three or more projects in the region of the country the project is located in the last five years indicating familiarity with state and local codes, environmental conditions, economic conditions and experience/qualifications of local design consultants. 3.�� Cost control, project schedule, safety, and quality of work A.� Contractor has a proven record of excellent performance by completing projects on or ahead of time.�� Using the previous project examples include the Contract Award/NTP date, the original contract completion date, and the actual contract completion date for each project. B.�� Contractor has a proven record of excellent performance by reducing cost and completing projects on or below budget.� Using the previous project examples indicate the contract award amount, the final contract value, and a percentage of change order value relative to the total construction value for each project.� C.�� Contractor has established Safety and Quality Control procedures and protocols which are consistently applied to all projects.� 4.�� Financial Capabilities Contractor is in sound financial standing with no claims or liens.� Contractor has sufficient financial capacity to bond a project in the $1M to $5M range.� Provide aggregate and per project bonding capacity limits. Your project examples shall include the location of the project, the project owner, a brief description of the services performed.� Your synopsis should also include the date of contract award, the original and final date of contract completion. Using the previous project examples indicate the original contract price and final contract value.� The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; and 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements. Your submission should not exceed 10 pages.� Your submission should not exceed 10 pages.� Your response to this Notice, is due no later than December 23, 2022, by 2:00 PM EST, and submit it via email to Bryan Ramso, Contract Specialist, US Department of Labor/OASAM/OSPE/JCAS, A&E Construction at ramso.bryan@dol.gov.� Businesses such as HUBZone, small disabled veterans, small, disadvantaged businesses, 8(a) certified, and women owned, and large business concerns are encouraged to submit a response to this notice.� NAICS Code for this requirement is 236220.� �� Acknowledgment of responses will not be made, nor will respondents be notified regarding the results of the Government�s evaluation of the information received.� The determination to proceed with the acquisition is within the discretion of the Government.� Telephone inquiries will not be accepted.� Please be reminded that a prospective Offeror interested in obtaining a contract award with the Government must be registered in the Federal Government's System for Award Management (SAM) database.� Additional information regarding contractor registration can be obtained through the following website, www.SAM.gov.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/976be4ac56354f64a0758fe4fd663e30/view)
- Place of Performance
- Address: Memphis, TN 38116, USA
- Zip Code: 38116
- Country: USA
- Zip Code: 38116
- Record
- SN06539395-F 20221210/221208230105 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |