Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF DECEMBER 14, 2022 SAM #7684
SOLICITATION NOTICE

61 -- 61--AN/SPN-46 6U VME64X Sub Rack Power Supply Assemblies

Notice Date

12/12/2022 12:08:27 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

335999 — All Other Miscellaneous Electrical Equipment and Component Manufacturing
 

Contracting Office

NAVAIR WARFARE CTR AIRCRAFT DIV JOINT BASE MDL NJ 08733 USA
 

ZIP Code

08733
 

Solicitation Number

N68335-23-R-0014
 

Response Due

12/8/2022 8:30:00 AM
 

Archive Date

06/06/2023
 

Point of Contact

Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
 

E-Mail Address

marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N68335-23-R-0014 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-12-08 11:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Saint Inigoes, MD 20684 The NAWC-AD Lakehurst requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: Pilot Production Unit (PPU) PSA Pilot Production Units (PPUs) Power Supply Assembly (PSA) for design verification testing (DVT) in accordance with Buy Package Attachment 002 - Statement of Work (SOW) ""AN/SPN-46 6U VME64X SUBRACK POWER SUPPLY ASSEMBLIES"" dated April 2022; upon request and a valid DD2345 ""Subsystem Specification for 6VME64X SUBRACK POWER SUPPLY"" and Buy Package Attachment 002 ""CDRLs""., 2, EA; LI 002: PSA PPUs - CDRLs Exhibits A001-A006 shall be submitted in accordance with (IAW) Buy Package Attachment 001., 1, LOT; LI 003: PSA Production Year 1 PSA Production Unit (Production Year 1) PSA Production Unit in accordance with Buy Package Attachment 002 - SOW., 18, EA; LI 004: CDRLs Production Year 1 Exhibits A001-A006 shall be submitted in accordance with (IAW) Buy Package Attachment 001., 1, LOT; LI 005: PSA Production Year 2 PSA Production Unit (Production Year 2) PSA Production Unit in accordance with Buy Package Attachment 002 - SOW., 18, EA; LI 006: CDRLs Production Year 2 Exhibits A001-A006 shall be submitted in accordance with (IAW) Buy Package Attachment 001., 1, LOT; LI 007: PSA Production Year 3 PSA Production Unit (Production Year 3) PSA Production Unit in accordance with Buy Package Attachment 002 - SOW., 18, EA; LI 008: CDRLs Production Year 3 Exhibits A001-A006 shall be submitted in accordance with (IAW) Buy Package Attachment 001., 1, LOT; LI 009: PSA Production Year 4 PSA Production Unit (Production Year 4) PSA Production Unit in accordance with Buy Package Attachment 002 - SOW., 18, EA; LI 010: CDRLs Production Year 4 Exhibits A001-A006 shall be submitted in accordance with (IAW) Buy Package Attachment 001., 1, LOT; LI 011: PSA Production Year 5 PSA Production Unit (Production Year 5) PSA Production Unit in accordance with Buy Package Attachment 002 - SOW., 18, EA; LI 012: CDRLs Production Year 5 Exhibits A001-A006 shall be submitted in accordance with (IAW) Buy Package Attachment 001., 1, LOT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a quote on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bid MUST be good for 60 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be ""ACTIVE"" at the time of award. In accordance with (IAW) FAR 4.1201 (b)(2), a contractor that represented itself as a small business prior to award of a contract must update the representations and certifications in SAM in accordance with 52.219-28, A contractor that represented itself as other than small business before contract award and qualifies as a small business may update its representations and certifications in SAM in accordance with 52.219-28. WARNING: THIS PROCUREMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C. APP 2401, ET SEQ). VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161. This procurement will utilize Government Export Controlled specifications, and therefore contractors will be required to have a valid DD2345 in order to bid. Specifications are not required to be utilized, however are available upon request if needed. Specifications should be updated to Attachment 1 in the Company Self-Certification Letter. Please email your approved DD2345 to lisa.m.winkler.civ@us.navy.mil by 11:00 AM EDT on 05 December 2022 and the specifications and Attachment 1 to the Company Self Certification Letter will be sent via DoD SAFE to the personnel listed on the approved DD2345. SPECIFICATIONS AND ATTACHMENT 1 TO THE COMPANY SELF CERTIFICATION LETTER WILL NOT BE PROVIDED TO ANY OFFERORS WHO DO NOT SUBMIT THEIR VALID DD2345 BY THE DATE AND TIME REFERENCED ABOVE. See Attachment 003 - Solicitation N68335-23-R-0014; Attachment 004 N68335-23-R-0014 Evaluation Plan The Preferred Delivery Time for the two Engineering Development Models is 8 months after receipt of order. The Production Units Preferred Delivery Time is 120 days after receipt of order. The Government's required lead times are provided in the Company Self Certification Letter. All CDRL Line Items are Not Separate Priced (NSP). Pricing should not be included for these line items. Sellers certify that they can meet the following requirements as part of the Government�s responsibility determination and can provide justification/substantiation if requested: The vendor does have adequate resources to perform the contract, or the ability to obtain them (see 9.104-3(a)); the vendor does have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors). (See 9.104-3(a)); the vendor does have the necessary production and technical equipment and facilities, or the ability to obtain them (see 9.104-3(a)); and, the vendor is able, to comply with the required or proposed performance schedule, taking into consideration all existing commercial and governmental business commitments.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/10cd71ffeadc474aafed4e079a908363/view)
 

Place of Performance

Address: 17598 Webster Field Road , Saint Inigoes, MD 20684-4013, USA

Zip Code: 20684-4013

Country: USA
 

Record

SN06540371-F 20221214/221213084346 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |