SOURCES SOUGHT
Y -- USACE SPK DBB Construction - Composite Aircraft Antenna Calibration Facility - Hill AFB, UT
- Notice Date
- 12/16/2022 1:53:42 PM
- Notice Type
- Sources Sought
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- US ARMY ENGINEER DISTRICT SACRAMENT SACRAMENTO CA 95814-2922 USA
- ZIP Code
- 95814-2922
- Solicitation Number
- W9123823S0003CAACF
- Response Due
- 1/3/2023 9:00:00 AM
- Point of Contact
- Britanie Butler
- E-Mail Address
-
britanie.v.butler@usace.army.mil
(britanie.v.butler@usace.army.mil)
- Description
- This Sources Sought Notice is being issued for market research purposes to determine the availability, capability, and interest of small business firms for a potential Government requirement. NO SOLICITATION IS AVAILABLE; requests for a solicitation will go unanswered. No award will be made from this Notice. Responses will be used to determine potential acquisition strategies, understand current market capabilities, and to gain knowledge of potential sources. GENERAL SCOPE: The U.S. Army Corps of Engineers (USACE), Sacramento District (SPK), anticipates a potential requirement to construct a composite aircraft antennae calibration facility for utilizing conventional design and construction methods to accommodate the mission of the facility. Project will include fire suppression systems, all utilities, pavements, communications, site improvements, and associated support facilities to provide a complete and useable facility. Facilities will be designed as permanent construction in accordance with DoD Unified Facilities Criteria (UFC) 1-200-01, General Building Requirements, and UFC 1-200-02, High Performance and Sustainable Building Requirements. This project will comply with DoD antiterrorism/force protection requirements per UFC 4-101-01. This project will also include construction of an anechoic chamber, Radar Absorbing Material (RAM) installation, and involves critical tolerances to include very flat floor finishes. Potential offerors will need to show experience in constructing anechoic chambers, RAM installation, and very flat floor finishes per ACI 302.1R within the last seven (7) years. The potential requirement may result in a solicitation issued approximately February 2023. If solicited, the Government intends to award the contemplated requirement as a firm-fixed-price contract by approximately June 2023. It is estimated that the potential requirement can be completed within 730 calendar days. In accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 236.204(ii), the Government currently estimates the magnitude of construction for this project to be between $25,000,000 and $100,000,000. The North American Industrial Classification System (NAICS) code for the potential requirement is anticipated to be 236220, Commercial and Institutional Building Construction. The small business size standard for this NAICS, as established by the U.S. Small Business Administration, is $39.5 Million annual revenue. The Product Service Code for the potential requirement is anticipated to be Y1BG, Construction of Electronic and Communication Facilities. If there is a reasonable expectation that at least two (2) responsible small business concerns under this NAICS can provide the anticipated services at fair market prices, the Contracting Officer is required to set the acquisition aside for small business concerns. If competition is set-aside for small businesses, Federal Acquisition Regulation (FAR) 52.219-14, Limitations on Subcontracting, requires that general construction small business Contractors self-perform at least fifteen percent (15%) of the cost of the contract, not including the cost of materials. If no set aside is made, the requirement is competed with full and open competition, and the awarded Contractor is not a small business, the Contractor is required to perform the percent of work identified in the solicitation under FAR 52.236-1,�Performance of Work by the Contractor. Contractors with the skill, capabilities, workload capacity, and ability to obtain bonding to complete the project described above (either through self-performance and/or Subcontractor management) are invited to provide capability statements to the point of contact listed below. Other than small businesses are also encouraged to submit Capability Statements. CAPABILITY STATEMENT: Responses must be limited to ten (10) 8.5 x 11 pages with a minimum font size of point 10. Please provide the following information: 1) Company name, Employer Identification Number�(EIN; previously DUNS #), address, point of contact, phone number, and e-mail address. 2) Experience and capability to complete contracts of similar magnitude and complexity to the potential requirement, including at least three (3) examples of comparable work performed within the past seven (7) years. Each example should include a brief description of the project, description of the work performed (identification of self-performance and/or Subcontractor management), customer name, customer satisfaction, timeliness of performance, dollar value of the project, and whether there were any challenges experienced during the project (delays, investigations, health and safety issues, labor shortages, management/organizational issues, etc.). 3) Business size and socioeconomic type for the applicable NAICS (ex: certified HUBZone, Woman-Owned Small Business, Serviced-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), 8(a) Participant, small business, or other than small business (large business)). 4) Bonding capability (in the form of a Surety letter). Please submit all capabilities statements, information, brochures, and/or marketing material as one (1) document, limited to the page maximum above. Responses will not be considered an offer, proposal, or bid for any solicitation that may result from this Notice. Moreover, responses will not restrict the Government to an ultimate acquisition approach. This Notice is for information and planning purposes only. Respondents will not be notified of the results of any review conducted or the capability statements received. Draft copies of the specification sections for Radar Absorbing Material (RAM), very flat floor finishes per ACI 302.1R, and anechoic chamber may be provided by request to the Contract Specialist below for consideration of capabilities. Please include the Sources Sought Number in the subject line when requesting copies of draft specifications. Please provide responses and/or questions by e-mail to the Contract Specialist, Britanie Butler, at (britanie.v.butler@usace.army.mil) by 1000 / 10:00 a.m. (MT) Tuesday, 3 January 2023. Please include the Sources Sought Notice number, �W9123823S0003� in the subject line.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/f53b8264114943ddb3ec30fae2ed8705/view)
- Place of Performance
- Address: Hill AFB, UT 84056, USA
- Zip Code: 84056
- Country: USA
- Zip Code: 84056
- Record
- SN06546067-F 20221218/221216230101 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |