SAMDaily.us | SRCSGT | 59 | 1 NSN LTC SOURCES SOUGHT

SAMDAILY.US - ISSUE OF JANUARY 06, 2023 SAM #7710
SOURCES SOUGHT

59 -- 1 NSN LTC SOURCES SOUGHT

Notice Date: 1/4/2023 4:32:48 AM
Notice Type: Sources Sought
NAICS: 335313 — Switchgear and Switchboard Apparatus Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: SPE7MX23R0052
Response Due: 1/13/2023 8:59:00 PM
Point of Contact: Scott D. Knowles, Phone: 6146920639
E-Mail Address: scott.knowles@dla.mil
(scott.knowles@dla.mil)
Description: ***Sources Sought***� � � � �***Sources Sought***� � � � � ***Sources Sought***� � � � �***Sources Sought***� ��***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � NO SOLICITATION IS BEING ISSUED AT THIS TIME. � The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. �Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. �Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. �All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. �Phone 614 692-0639. We thank you in advance for your assistance. NSN�� NAME�� 5930-00-307-8856�� SWITCH ASSEMBLY �� Switch Assembly RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. � � � RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. � � � RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) � � � RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN � � � RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES � � � ZD080: SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. � � � CA070: FULL AND OPEN COMPETITION APPLY CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE � � �USED NOR INCORPORATED IN ANY ITEMS TO BE � � �DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION � � �SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT � � �DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. � � �SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR � � �APPROVAL UNLESS THEY ARE AUTHORIZED BY THE � � �SPECIFICATION REQUIREMENTS. � � �CRITICAL APPLICATION ITEM � � �IAW BASIC SPEC NR MIL-PRF-11021J NOT 1 � � �REVISION NR J � DTD 07/06/2021 � � �PART PIECE NUMBER: MS51113-1 � � �IAW REFERENCE DRAWING NR 19207 12369007 � � �REVISION NR B � DTD 08/10/2006 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12369001 � � �REVISION NR D � DTD 05/14/2007 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12480561 � � �REVISION NR � � DTD 11/06/2002 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 7723494 � � �REVISION NR F � DTD 09/30/1997 � � �PART PIECE NUMBER: � � �IAW REFERENCE QAP 16236 SQAP003078856 � � �REVISION NR � � DTD 08/14/2007 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12480561 � � �REVISION NR � � DTD 10/30/2002 � � �PART PIECE NUMBER: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 �PRES MTHD:10 �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:00 �CUSH/DUNN MAT:NA �CUSH/DUNN THKNESS:A UNIT CONT:D3 �OPI:O INTRMDTE CONT:DO �INTRMDTE CONT QTY:028 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKHAZ: Start_of_Hazardous_Packaging_Data � � �HAZARDOUS PACKAGING STATEMENT � � �PACKAGING DATA: SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS � � � MATERIALS PACKAGING REQUIREMENTS. � � �PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS SHALL COMPLY WITH � � �APPLICABLE REGULATIONS, I.E., TITLE 49 CODE OF FEDERAL REGULATIONS, � � �INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS � � �(EXCLUDING PARAGRAPH 1.4 OF CHAPTERS 1 AND 3), AND INTERNATIONAL � � �MARITIME DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG COMPLY WITH � � �UNITED NATIONS (UN) RECOMMENDATIONS ON TRANSPORT OF DANGEROUS GOODS. � � �WHEN A CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES SHIPMENT � �� THROUGH �A MILITARY AERIAL PORT FOR TRANSPORT VIA MILITARY AIRCRAFT,� � � �PACKAGING �SHALL COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS MATERIALS� � � �FOR MILITARY AIR SHIPMENT. � � �LABELING AND MARKING: ALL INTERIOR AND EXTERIOR CONTAINERS SHALL BE � � �LABELED AND MARKED AS SPECIFIED IN THE REFERENCED PRODUCT SPE � � �CIFICATION, AND/OR AS SPECIFIED IN SECTION C OF THE CONTRACT OR ORDER. � � �IN ADDITION, ALL LABELING AND MARKING SHALL COMPLY WITH THE � � �REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR, AND, AS APPLICABLE, ICAO � � �TECHNICAL INSTRUCTIONS, IMDG ANNEX 1, AND/OR DLAI 4145.3. � � �CERTIFICATION: ALL PACKAGING PERFORMANCE TEST REQUIREMENTS SHALL BE � � �SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING TO DATE OF TESTING AND � � �DATA RESULTS OBTAINED FROM TESTING. THE CONTRACTOR'S SIGNED � � �CERTIFICATION THAT PACKAGE CONFIGURATION MEETS 49 CFR, AND, AS � � �APPLICABLE, ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS, SHALL BE � � �INCLUDED ON THE DD FORM 250 (MATERIAL INSPECTION AND RECEIVING REPORT), � � �OR ANY SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL � � �CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR INSPECTION BY AUTHORIZED U. � � �S. GOVERNMENT REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3 YEARS � � �FROM DATE OF SHIPMENT. � � �IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH � � �FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE � � �WITH ASTM D3951. � � �End_of_Hazardous_Packaging_Data IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS � � �PREP FOR DELIVERY --------------------------------------------------------------- Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/a3d07d156fe2446ebad6dc325a79380a/view)
Place of Performance: Address: Columbus, OH 43218, USA; Zip Code: 43218; Country: USA
Record: SN06556414-F 20230106/230104230110 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

59 -- 1 NSN LTC SOURCES SOUGHT