SOLICITATION NOTICE
10 -- Bolt, Breech
- Notice Date
- 1/9/2023 6:40:45 AM
- Notice Type
- Presolicitation
- NAICS
- 332994
— Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX23R0035
- Archive Date
- 01/26/2023
- Point of Contact
- SARAH SCHAFF, Phone: (380)245-7698
- E-Mail Address
-
SARAH.SCHAFF@DLA.MIL
(SARAH.SCHAFF@DLA.MIL)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- RESPONSE DATE:� Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP). The solicitation will be available in DIBBS on or about its estimated issue date of 01/26/2023. Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years and 2 option years. DESCRIPTION: NSN(s): 1055014438386 Item Description: Bolt, Breech Unit of Issue: EACH THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH ���� MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN ���� THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1) ���� QUALIFICATION REQUIREMENTS IS APPLICABLE. THE ���� AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM ���� SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). ���� THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES ���� MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR ���� EVALUATION PRIOR TO CONTRACT AWARD. REFERENCE NUMBER RQ016 ���� RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS ���� LISTS (QML).� THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A ���� SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR ���� QUALIFIED MANUFACTURERS LIST (QML).� QUALIFICATION REQUIREMENTS IN ���� PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED ���� MANUFACTURERS LIST (QML)"" APPLY. ���� CRITICAL APPLICATION ITEM ���� IAW BASIC DRAWING NR 19200 12012073 ���� REVISION NR B�� DTD 05/07/2008 ���� PART PIECE NUMBER: ���� THE ITEM BEING PROCURED IS A CRITICAL GUN PART ���� ITEM WITH UNIQUE REQUIREMENTS. CONTRACTOR FAT APPLIES. ���� THIS ITEM IS A ""DEFENSE ARTICLE"" AS DEFINED IN ���� AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS ���� REGULATIONS (22 C.F.R. 120-30) AND THE ARMS ���� EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ���� ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES ���� IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF ���� DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF ���� STATE.� DOCUMENTARY EVIDENCE OF REGISTRATION MAY ���� BE REQUIRED PRIOR TO AWARD.� ADDITIONAL EXPORT ���� RESTRICTIONS APPLY AS INDICATED HEREIN.� FAILURE �� ��TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL ���� MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD. � Indefinite Quantities for Delivery Orders.� Estimated Annual Quantity is 111 each. Destination Information: Various DLA Stock Locations Delivery Schedule: 290 Days All responsible sources may submit an offer/quote which shall be considered. The proposed contract is 100% set-aside for small business concerns. � ���� RQ032: EXPORT CONTROL OF TECHNICAL DATA ���� This item has technical data some or all of which is subject to ���� export-control of either the International Traffic in Arms regulations ���� (ITAR) or the Export Administration Regulations (EAR), and cannot be ���� exported without prior authorization from either the Department of State ���� or the Department of Commerce. Export includes disclosure of technical ���� data to foreign persons and nationals whether located in the United ���� States or abroad. This requirement applies equally to foreign national ���� employees and U.S. companies and their foreign subsidiaries. DFARS ���� 252.225-7048 is applicable to this data. ���� The Defense Logistics Agency (DLA) limits distribution of export-control �� ��technical data to DLA contractors that have an approved US/Canada Joint ���� Certification Program (JCP) certification, have completed the ���� Introduction to Proper Handling of DOD Export-Controlled Technical Data ���� Training and the DLA Export-Controlled Technical Data Questionnaire ���� (both are available at the web address given below), and have been ���� approved by the DLA controlling authority to access the ���� export-controlled data. Instructions for obtaining access to the ���� export-controlled data can be found at: ���� https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ ���� To be eligible for award, offerors and any sources of supply proposed ���� for use are required to have an approved JCP certification and have ���� been approved by the DLA controlling authority to access ���� export-controlled data managed by DLA. DLA will not delay award in ���� order for an offeror or its supplier to apply for and receive approval ���� by the DLA controlling authority to access the export-controlled data. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil/. Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software.��� Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257). Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP.���� One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.��� Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirement at time of award, in accordance with FAR clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation.���� Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.�� The Small Business size standard is 1,000 employees. Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.� The total duration (base plus option years) shall not exceed 5 years.� While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ecf70bb40bf14cbdbd9063f906440660/view)
- Record
- SN06559395-F 20230111/230109230104 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |