Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JANUARY 11, 2023 SAM #7715
SOLICITATION NOTICE

66 -- Stereolithrography Printer - 3D Printer

Notice Date

1/9/2023 11:39:00 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

333248 —
 

Contracting Office

W2R2 USA ENGR R AND D CTR VICKSBURG MS 39180-6199 USA
 

ZIP Code

39180-6199
 

Solicitation Number

W912HZ23Q0T6O
 

Response Due

2/8/2023 12:00:00 PM
 

Archive Date

02/23/2023
 

Point of Contact

William Rawe, Christine L. Wilson
 

E-Mail Address

william.t.rawe@usace.army.mil, Christine.L.Wilson@usace.army.mil
(william.t.rawe@usace.army.mil, Christine.L.Wilson@usace.army.mil)
 

Description

The Engineer Research and Development Center (ERDC), Coastal and Hydraulics Laboratory, is in need of purchasing a stereolithography (SLA) workflow solution for the additive manufacturing of large parts and complex shapes in support of USACE, the Army, and DOD�s missions. The ERDC�s requirement for additive manufacturing of 3D parts stems from its needs to create large, highly specialized parts with complex features, both optically clear for fluid flow analysis in large hydraulics structures/devices as well as opaque for long-term, outside applications. The ERDC CHL is seeking quotes for a high speed, high volume large-format 3D print stereolithography workflow solution. The minimum specifications are listed below. Equipment shall be new or in unused condition. Used or refurbished equipment will not be considered. The following salient characteristics must be met at a minimum: SLA 3D printer compatible with optically clear and opaque stereolithography resins Removable vat and in-vat auto material mixing Minimum build size capacity (xyz): 750 x 750 x 550 mm Accuracy requirement: not to exceed 0.002 inch per inch of part dimension Software to prepare, optimize, and print native CAD data included Compatible post-processing UV cure oven included Build unload trolley/cart included Two compatible resin vats and required accessories included Initial vat fill of optically clear stereolithography and environmentally stable opaque resins that meets the following: Evaluation of optically clear printed part per ASTM D1003-13 standard to meet the following optical properties at a minimum: Haze � 4.3% Luminous transmittance � 87.2% Diffuse transmittance � 3.8% Demonstration of opaque printed part to maintain an ultimate tensile strength and tensile modulus of at least 50 MPa over an 8-year aging time for indoor and outdoor weather exposure per ASTM G154 standard and biocompatible capable per ISO 10993-5. Installation, calibration, and training for 4 people
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/31447e9ae3534234849e71198b0789b9/view)
 

Place of Performance

Address: Vicksburg, MS 39180, USA

Zip Code: 39180

Country: USA
 

Record

SN06559715-F 20230111/230109230106 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |