SOURCES SOUGHT
20 -- 01-137-2013; Propeller, Forward
- Notice Date
- 1/25/2023 11:01:38 AM
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MC23R0005
- Response Due
- 2/1/2023 1:00:00 PM
- Point of Contact
- Mandy Phipps-Kuhlman
- E-Mail Address
-
mandy.phipps-kuhlman@dla.mil
(mandy.phipps-kuhlman@dla.mil)
- Description
- This is NOT a solicitation for proposals, proposal abstracts, or quotations.� No solicitation exists at this time. ********************* DLA Land and Maritime is preparing to solicit a one-time buy for 115 each, NSN 2010-011372013, propeller, forward.� The approved manufacturer and part number for this NSN is:� Reinhold Industries, Inc. (2D301) p/n 5268342 The applicable North American Classification System (NAICS) code is 336611 with a business size of 1,250 employees. DLA Land and Maritime does not possess technical data for this NSN.� Sources interested in becoming an approved source for this NSN must submit the appropriate information as outlined in Procurement Notes L04 � Offers for Part Numbered Items and M06 � Evaluation of Offers for Part Numbered Items.� This sources-sought notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government.� This notice is intended strictly for market research.� This is NOT a solicitation for proposals, proposal abstracts, or quotations.� No solicitation exists at this time.� The purpose of this notice is to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice.� Your response to the information requested will assist the Government in determining the appropriate acquisition method. Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to Mandy Phipps-Kuhlman via email at mandy.phipps-kuhlman@dla.mil by 4:00 PM EST on 02/01/2023.� ********************* Item Description: PROPELLER, FORWARD RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RD002, COVERED DEFENSE INFORMATION APPLIES RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PRESERVATION OF MATERIAL - ALL BARE METAL SHALL BE PROPERLY PRESERVED TO PREVENT CORROSION. ALL MOVING PARTS SHALL BE PROPERLY LUBRICATED. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED. PACKAGE DESIGN MUST IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. UNIT CONTAINER SELECTION MUST ADEQUATELY CONTAIN MATERIAL. CONTAINER SEAL MUST PREVENT ITEM FROM BOTTOMING OUT AND/OR PUNCTURING THROUGH CONTAINER. RT001: MEASURING AND TEST EQUIPMENT SQAP011372013 APPLIES SOURCE CONTROL DRAWING ""THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST CONFORM TO SOURCE CONTROL DRAWING. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE SOURCE CONTROLLED COMPONENTS FROM SOURCES APPROVED ON THE APPLICABLE SOURCE CONTROL DRAWING."" A. Data required by this document will be included in the price of the procured item(s). B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies.� If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data.� Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP). C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT. D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT - Web Based Training Main Menu under ""Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer of the material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract.� Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years.� When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained. E. No Certificate of Conformance (COC) or alternate release is authorized. End of Requirement SPECIAL NOTICE FOR MARKING AND SERIAL NUMBER REQUIREMENT: PER GENERAL NOTE CALL OUT ON BASIC DRAWING, INDIVIDUAL SERIAL NUMBERS ARE TO BE ETCHED ON THE PROPELLORS IN LOCATION SHOWN. CONTRACTOR IS RESPONSIBLE TO OBTAIN SERIAL NUMBERS FROM NUWC, KEYPORT AS SPECIFIED. MARKING REQUIREMENTS ARE TO BE PERFORMED AFTER BALANCING HOLES ARE DRILLED TO PREVENT OBSCURING MARKING. POC ON THIS MATTER AT NUWC KEYPORT IS LETICIA MASON (360) 315-3084 REINHOLD INDUSTRIES, INC. 2D301 P/N 5268342 ********************* Packaging Requirements: PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. All DLA Master List of Technical and Quality Requirements take�precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be�as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING�REQUIREMENTS FOR PROCUREMENT
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/a2f03954b21548ec90ff1ad76cac2bcd/view)
- Record
- SN06573628-F 20230127/230125230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |