SPECIAL NOTICE
59 -- 59--MARINE GRADE ACTIVE STABILIZER
- Notice Date
- 1/26/2023 3:45:37 PM
- Notice Type
- Special Notice
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- OFFICE OF ACQUISITON GRANTS SACRAMENTO CA 95819 USA
- ZIP Code
- 95819
- Solicitation Number
- 140G0323Q0048
- Response Due
- 2/6/2023 5:00:00 PM
- Archive Date
- 03/01/2023
- Point of Contact
- Huot, Tracy, Phone: 9162789330
- E-Mail Address
-
thuot@usgs.gov
(thuot@usgs.gov)
- Description
- MARINE GRADE ACTIVE STABILIZER This is a notice of intent to solicit from a single source. The U.S. Geological Survey (USGS), intends to award a purchase order with ClearSkies Geomatics of Boulder, CO for a marine grade active stabilizer as described in the specifications below. Award will be made in accordance with Federal Acquisition Regulation (FAR) 13.106-1(b) and the procedures at FAR Part 12 entitled, Acquisition of Commercial Items and FAR Part 13 entitled, Simplified Acquisition Procedures, ClearSkies Geomatics is, to the USGS knowledge, the only source who can provide the stabilizer that meets all criteria in the required characteristics and is compatible with already purchased equipment. The stabilizer would have to come equipped with software to accept input from shipboard internal measurements unit (IMU) and be able to process NMEA data. Only one product on the open market has been identified that satisfies these requirements, the Somag NSM 400. ClearSkies Geomatics is the only US based reseller of this item. This unit satisfies the IP67 standard suitable operation in offshore environments, accepts payloads up to 100 kg, can compensate for up to 20 degree of pitch and roll within 0.5 degree of accuracy. The stabilizer also accepts IMU data and NMEA frame input. The purpose of this notice is to satisfy the requirements of FAR Subpart 5.2. This notice of intent is not a request for competitive quotes. However, all responsible parties may submit a capability statement by the closing date of this announcement which shall be considered by the agency. No solicitation will be issued. A determination not to compete this action based upon responses received is in the sole discretion of the Government. The NAICS code for this action is 334513 Instruments and Related products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables, with the associated size standard of 750 employees apply to this announcement. Responses or inquiries shall only be accepted through electronic mail addressed to thuot@usgs.gov and must be uploaded and received in their entirety no later than 02/06/2023 1700 PS. Responses submitted by hardcopy or the SAM.gov portal shall not be accepted or considered. Specifications for radar platform stabilizer -Accepts payloads up to 100 kg -Compensates for up to 20 degrees of pitch and roll with a mean deviation <0.5 degrees -Maintains continuous torque of 125 Newton-meters -Achieves peak torque of 250 Newton-meters -Stabilizer itself should weigh less than 35 kg and has a mounting surface 400 mm to 500 mm in diameter -Operating voltage of 28 VDC -Average power consumption <100 W -Available communication interfaces should include Ethernet, RS422, and RS232 -The device accepts IMU data and NMEA frame input -The device must satisfy IP67 standards protecting against water ingress -The device should be declared to meet the following DNV GL Maritime operating standards: DNV GL-CG-0339 sections 3.7 and 3.9 regarding operating and storage temperature, DNV GL-CG-0339 Section 3 No. 8.3 regarding humidity tolerance, DNV GL-CG-0339 Section 3.10 regarding salt mist, DNV GL-CG-0339 Section 3.6 regarding vibration.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/21c94e2bf1e14fca8b28397d304f5d04/view)
- Record
- SN06574063-F 20230128/230126230106 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |