SAMDaily.us | PRESOL | H | H2--Fiber Communcation Equipment

SAMDAILY.US - ISSUE OF MARCH 16, 2023 SAM #7779
SOLICITATION NOTICE

H -- H2--Fiber Communcation Equipment

Notice Date: 3/14/2023 12:40:27 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 335921 — Fiber Optic Cable Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: FORTGORDONITDCTE0001
Response Due: 2/24/2023 11:30:00 AM
Archive Date: 08/23/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FORTGORDONITDCTE0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 335921 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-02-24 14:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Gordon, GA 30905 The MICC End User requires the following items, Brand Name Only (Exact Match), to the following: LI 001: AFL 90S+ Fusion Splicer without Bluetooth (machine only) PN:S017520 Description: Fiber Alignment Method: Active core alignment Fiber Count Can Be Spliced: Single fiber Applicable Fiber Fiber Type: Single mode & Multi mode optical fiber Cladding Dia: 80 to 150 ?m Applicable Coating Sheath Clamp: Coating dia.: Max. 3,000 ?m Cleave length : 5 to 16 mm Fiber Splice Performance Splice Loss ITU-T G.652 : Avg. 0.02 dB ITU-T G.651 : Avg. 0.01 dB ITU-T G.653 : Avg. 0.04 dB ITU-T G.654 : Avg. 0.04 dB ITU-T G.655 : Avg. 0.04 dB ITU-T G.657 : Avg. 0.02 dB Splice Loss SM FAST mode : Avg. 8 to 10 sec. SM AUTO mode : Avg. 11 to 13 sec. AUTO mode : Avg. 14 to 16 sec. Applicable Protection Sleeve Sleeve Type: Heat-shrinkable sleeve Sleeve Length: Max. 66 mm Sleeve Dia: Max. 6.0 mm before shrinking Sleeve Heat Performance Heat Time 60 mm slim mode : Avg. 9 to 10 sec. 60 mm mode : Avg. 13 to 15 sec. Fiber Tensile Test Force: Approx. 2.0 N Electrode Life: Approx. 5,000 splices Physical Description Dimensions W: Approx.170 mm without projection Dimensions D: Approx.173 mm without projection Dimensions H: Approx.150 mm without projection Weight: Approx. 2.8 kg including battery Environmental Condition Temperature: Operate : -10 to 50oC Storage : -40 to 80oC Humidity: Operate : 0 to 95% RH non-condensing Storage : 0 to 95% RH non-condensing Altitude: Max. 5,000 m Ac Adaptor Input AC100 to 240 V, 50/60 Hz, Max. 1.5 A Battery Pack Type: Rechargeable Lithium Ion Output: Approx. DC14.4V / 6,380 mAh Capacity: Approx. 300 splice and heat cycles Temperature: Recharge : 0 to 30oC Storage : -20 to 30oC Battery Life: Approx. 500 recharge cycles Recharge Time: Approx. 5 � 8 hours from empty Display LCD Monitor: TFT 5 inches with touch screen Magnification: 200 to 320x Illumination V-Grooves: LED lamp Interface PC: USB2.0 Mini B type External Led Lamp: USB2.0 A type, Approx. DC5V, 500 mA Ribbon Stripper: Mini DIN 6 pin, DC12V, Max. 1A Data Storage Splice Mode: 100 splice modes Heat Mode: 30 heat modes Splice: Result 20,000 splices Splice: Image 100 images Screw Hole For Tripod: 1/4-20 UNC Other Features Automatic Functions: Splice mode select by fiber type analysis Discharge power calibration Wind protector : open/close Sheath clamp : open Heater lid : open/close Heater clamp : open/close Reference Guide: Video and PDF file stored in splicer Sheath Clamp: Easy sleeve positioning clamp Electrode: Replaceable without tool, 15, EA; LI 002: Fiber Installment Sales Power meter and light source test equip kit: PN F11835LR Optical Power Meter Wavelengths: 850/1310/1550nm Resolution: 0.1dB HH Series 0.01dB HR Series Detector: 2mm Germanium Dynamic Range: -65dBm to +5dBm -45dBm to +23dBm (CATV Version single mode) -30dBm to +23dBm (CATV Version multimode) Accuracy: �.3dB Operating Temp: -10� to 50�C Battery: 9V Alkaline Dimensions: 6 �� L x 3 �� W x 1 �� D Optical Light Source: Lasers (VCSEL)850nm & 1300nm Output Power: -1 dBm min (62.5/125um Fiber) Lasers: 1310nm & 1550nm Output Power: -1.0 dBm min (9/125um Fiber) Modulation Modes: Continuous Wave Or 2 kHz Modulated Wave Operating Temp: -10� to 50�C Battery: 9V Alkaline Dimensions: 6 �� L x 3 �� W x 1 �� D, 6, EA; LI 003: Epson EX3280 3LCD XGA Projector Specifications Projection System:?Epson�3LCD, 3-chip technology Projection Method:?Front/rear/ceiling mount Driving Method:?Epson Poly-silicon TFT Active Matrix Pixel Number:?786,432 dots (1024 x 768) x 3 Color Brightness: 1?Color Light Output: 3,600 lumens White Brightness: 1?White Light Output: 3,600 lumens Aspect Ratio:?4:3 Native Resolution:?XGA Resize Support:?16:9, 16:10 Lamp Type:?210 W UHE Lamp Life:?Normal Mode: Up to 6,000 ECO Mode: Up to 12,000 hours Throw Ratio Range:?1.44 � 1.95 Size: (Projected)?30"" � 350"" Keystone Correction: Auto?Vertical: � 30 degrees Keystone Correction Manual:?Horizontal: � 30 degrees USB Plug �n Play?Projects audio and video, PC and Mac� compatible Contrast Ratio:??Up to 15,000:1 Color Reproduction?Up to 1.07 billion color Projection Lens? Type:?Manual focus F-Number?1.44 Focal Length?16.7 mm Zoom Ratio?1.0 � 1.35 (Digital Zoom) Interfaces? 1x HDMI 1x D-sub 15-pin 1X USB connector Type-B: USB Plug Dimensions (W x D x H)?Including Feet?11.8"" x 9.3"" x 3.2""Excluding Feet?11.8"" x 9.2"" x 3.0""Weight?5.2 lb Remote Control? Features?Front and rear directionalOperating Angle?Right/left: � 30 degreesUpper/lower: � 15 degreesOperating Distance?19.7 ft (6 m) Other? Display Performance?NTSC: 480 lines PAL: 576 lines(Depends on observation of the multi-burst pattern) Input Signal?NTSC/NTSC4.43/PAL/M-PAL/N-PAL/PAL60/SECAM Computer Compatibility?PC, Mac? Speaker?2 W mono Media Format? 4:3O perating Temperature?41 ? to 95 ?F (5 ? to 35 ?C) Power Supply Voltage?100 - 240 V AC +/- 10%, 50/60 Hz Power Consumption? Normal Mode: 345 W ECO Mode: 235 W (lamp on) Energy Saving: 0.3 W Fan Noise? Normal Mode: 37 dB Quiet Mode: 28, 5, EA; LI 004: Uline H-1564S-Y Standard Flammable Storage Cabinet - Self-Closing Doors, Yellow, 45 Gallon, Double wall 18-gauge steel. 350 lb. shelf capacity. Adjustable shelves. Sloped shelves safely direct spills away from containers. Recessed paddle handle, can be used with padlock. Continuous piano hinge. Adjustable leveling feet. Meets NFPA and OSHA Standards. FM Approved. Yellow - For aerosols, gasoline and flammable liquids. Doors automatically close if temperature reaches 165�F., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factors shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price."" No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/ . If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures Reporting During Contract Performance
Web Link: SAM.gov Permalink
(https://sam.gov/opp/e86f8f0071344e2f8f12c7ce88ecf952/view)
Place of Performance: Address: Building 521 (Ponderosa) , Fort Gordon, GA 30905, USA; Zip Code: 30905; Country: USA
Record: SN06617350-F 20230316/230314230105 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

H -- H2--Fiber Communcation Equipment