SOLICITATION NOTICE
59 -- Electrostatic Paint Guns
- Notice Date
- 3/21/2023 8:56:56 AM
- Notice Type
- Presolicitation
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- FA8125 AFSC PZIMA TINKER AFB OK 73145-3303 USA
- ZIP Code
- 73145-3303
- Solicitation Number
- FA8125-23-Q-0061
- Response Due
- 3/24/2023 8:00:00 AM
- Point of Contact
- Tanner Mullins, Sheridan Robison
- E-Mail Address
-
tanner.mullins.1@us.af.mil, sheridan.robison@us.af.mil
(tanner.mullins.1@us.af.mil, sheridan.robison@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The Air Force intends to solicit the following supply: The 76th CMXG/MXDEB is requesting the utilization of funds for the purchase of One (1) walking lift. The requested equipment item description/specifications are outlined below 76 AMXG requests the purchase of twenty (20) Electrostatic paint spray guns with the following minimum specifications: Paint guns shall be manual air assisted airless electrostatic paint guns rated for 85kV. Paint guns shall include an internal power supply rated for 85 kV and feature a Standard Display Paint gun shall not have electrical cords or a separate electrostatic control module. Paint guns shall be FM rated for use in Class I, Div. I Hazardous locations using group D materials or be intrinsically safe. Paint gun shall be compatible with high solid, epoxy, and polyurethane coatings, including MIL-PRF-23377 epoxy primers and MIL-PRF-85285 polyurethane topcoats. Paint gun shall have 1/4 inch fluid and air inlets to connect to existing paint cart systems. The air inlet shall be left handed male NPSM and the fluid inlet shall be male NPSM. Paint gun shall be rated for a maximum fluid pressure of 3000 psi and a maximum fluid temperature of 120 F. Paint gun shall be rated for a maximum air pressure of 100 psi. Paint gun shall come with a 613 spray tip. Paint gun shall be rated for ambient operating conditions of 40F-120F. Paint gun shall have a switch to turn the electrostatic on and off and an indicator light to show when the electrostatic system is active. Paint gun fluid hose shall have a 100 mesh inline fluid filter. Paint gun shall have a fan adjustment valve and an atomizing air adjustment valve. A Firm Fixed Price type contract is contemplated. Estimated Period of Performance: �150 days ARO This is a small business set-aside System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 335999 with a size standard of 500 EMP. Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home.� No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1). For further information contact: Tanner Mullins Contracting Specialist Tanner.mullins.1@us.af.mil
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/ee08632c58cb45aca019504b55c3c65d/view)
- Place of Performance
- Address: Tinker AFB, OK 73145, USA
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN06625516-F 20230323/230321230108 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |