SOURCES SOUGHT
66 -- Signal Analyzer
- Notice Date
- 3/21/2023 9:40:26 AM
- Notice Type
- Sources Sought
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- W6QK LAD CONTR OFF CHAMBERSBURG PA 17201-4150 USA
- ZIP Code
- 17201-4150
- Solicitation Number
- W25G1Q3052015Y
- Response Due
- 3/24/2023 1:00:00 PM
- Point of Contact
- Tammy Little
- E-Mail Address
-
tammy.r.little.civ@army.mil
(tammy.r.little.civ@army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The Army Contracting Command � Letterkenny Contracting Office (CCAM-MLK) is issuing this Sources Sought/Request for Information as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for (1) One each 44GHz signal analyzer. at Letterkenny Army Depot. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 333992 Welding and Soldering Equipment Manufacturing. There is no solicitation at this time. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. �The sole purpose of this request is to locate qualified, experienced, and interested potential sources. � If your organization has the potential capacity to provide these products please provide the following information: 1)�� �Business �name, mailing address, email address, website address, Point of Contact (POC), telephone number� 2)�� �Business size, any socioeconomic status (i.e. HUB Zone,8(a) Veteran-Owned, Women-Owned, etc.), company CAGE Code and DUNS number, type of ownership for the organization� 3)�� �Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements 4)�� �The NAICS code(s) and PSCs/FSCs your company usually performs under Government contracts 5)�� �Past performance with government agencies.� 6)�� �GSA contract number, if applicable. 7)�� �Identify whether you are a manufacturer or distributor.� The government will evaluate market information to ascertain potential market capacity to provide products or services consistent in scope and scale with those described in this notice and otherwise. Based on the responses to this sources sought/market research, this requirement may be set-aside for small businesses or procured through full and open competition, and multiple awards may be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Contractors are required to be registered in the System for Award Management (SAM) and Wide Area Work Flow (WAWF) in order to be awarded government contracts. � Submission Instructions: Interested parties who consider themselves qualified to provide the listed products are invited to submit a response to this Sources Sought by 24 March 2023 at 4:00 P.M. �Eastern Standard Time. The response/statement of capabilities must be complete and sufficiently detailed to allow the Government to determine the contractor�s qualifications. �All responses under this Sources Sought must be emailed to Tammy.r.little.civ@army.mil. � SIGNAL ANALYZER PURCHASE DESCRIPTION 1.� GOVERNMENT NEEDS:� A signal analyzer as described in this purchase description. 2.� SPECIFICATIONS:� The following specifications detail the basic characteristics of the signal analyzer: 2.1� GENERAL SPECIFICATONS 2.1.1.� Power Requirements: Voltage and frequency 100 to 120 V, 50/60/400 Hz 2.1.2.� Display - Resolution: 1280 x 800 minimum, Capacitive multi-touch screen - Size: 10.6 inch diagonal nominal 2.1.3.� Data Storage: 160 GB nominal (removable solid state drive) 2.1.4.� Dimensions (maximum); H: 7.5 inch x W: 17 inch x L: 15 inch 2.2� FREQUENCY AND TIME SPECIFICATIONS 2.2.1.� Frequency Range:� DC coupled: 10 Hz to 44 GHz; AC coupled: 10 MHz to 44 GHz 2.2.2.� Aging Rate:� � 1 x 10�6 / year 2.2.3.: Temperature Stability: 20 to 30 �C �������������������������� � 2 x 10�6 Full Temperature Range��� � 2 x 10�6 2.2.4.� Achievable Initial Calibration Accuracy: � 1.4 x 10�6 2.2.5� Trigger:� Free run, line, video, external 1, external 1, RF burst, periodic timer 2.2.6 Resolution Bandwidth ����������� Range (�3.01 dB bandwidth) 1 Hz to 10 MHz (10 % steps), 4, 5, 6, 8, 10 MHz Bandwidth Accuracy (power) 1 Hz to 750 kHz � 1.0 % (� 0.044 dB) nominal 820 kHz to 1.2 MHz (< 3.6 GHz CF) � 2.0 % (� 0.088 dB) nominal 1.3 to 2.0 MHz (< 3.6 GHz CF) � 0.07 dB nominal 2.2 to 3 MHz (< 3.6 GHz CF) 0 to -0.2 dB nominal 4 to 10 MHz (< 3.6 GHz CF) 0 to -0.4 dB nominal � 2.2.7.� Analysis Bandwidth:� Maximum bandwidth � 85 MHz 2.2.8.� Video Bandwidth Range - Same as Resolution Bandwidth range plus wide-open VBW (labeled 50 MHz) ����������� 2.3� AMPLITUDE ACCURACY AND RANGE SPECIFICATIONS 2.3.1.� Amplitude Range � Preamp on/off � Displayed Average Noise Level to +30 dBm 2.3.2.� Input Attenuator Range � 0 � 70 dB in 2 dB steps 2.3.3.� Maximum Safe Input Level Average Total Power +30 dBm (1 W) Peak Pulse Power +50 dBm (100 W) 2.3.4.� DC Volts:� AC coupled - � 100 Vdc; DC coupled - � .2 Vdc 2.3.5� Frequency Response Maximum error relative to reference condition (50 MHz) 20 to 30 �C Full range 95th percentile (? 2s) 20 Hz to 10 MHz � 0.6 dB � 0.8 dB � 0.28 dB 10 MHz to 50 MHz � 0.45 dB � 0.57 dB � 0.21 dB 50MHz to 3.6 GHz � 0.45 dB � 0.70 dB � 0.20 dB 3.6 to 5.2 GHz � 1.7 dB � 3.5 dB � 0.67 dB 5.2 to 8.4 GHz � 1.5 dB � 2.7 dB � 0.47 dB 8.4 to 13.6 GHz � 2.0 dB � 2.7 dB � 0.47 dB 13.6 to 17.1 GHz � 2.0 dB � 2.7 dB � 0.52 dB 17.1 to 22.0 GHz � 2.0 dB � 3.5 dB � 0.66 dB 22.0 to 26.5 GHz � 2.5 dB � 3.7 dB � 0.79 dB 26.5 to 34.5 GHz � 2.5 dB � 3.5 dB � 1.07 dB 34.4 to 44 GHz � 3.2 dB � 4.9 dB � 1.4 dB 2.4� DYNAMIC RANGE SPECIFICATIONS 2.4.1.� Gain Compression 1 dB gain compression (two-tone) 20 to 500 MHz +3 dBm (typical) 500 MHz to 3.6 GHz +5 dBm (typical) 3.6 to 26.5 GHz +4 dBm (typical) 26.5 to 44 GHz 0 dBm (nominal) 2.4.2.� Displayed average noise level (DANL) - Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain = High, 20 to 30 �C Full range Typical 10 Hz �95 dBm (nominal) 20 Hz �105 dBm (nominal) 100 Hz �110 dBm (nominal) 9 kHz to 1 MHz �120 dBm (nominal) 1 MHz to 1.2 GHz �135 dBm 1.2 to 2.1 GHz �154 dBm �152 dBm �155 dBm 2.1 to 3.6 GHz �152 dBm �151 dBm �154 dBm 3.6 to 4.2 GHz �144 dBm �142 dBm �147 dBm 4.2 to 6.6 GHz �146 dBm �144 dBm �149 dBm 6.6 to 8.4 GHz �148 dBm �146 dBm �150 dBm 8.4 to 13.6 GHz �148 dBm �146 dBm �150 dBm 13.6 to 20 GHz �145 dBm �143 dBm �148 dBm 20 to 26.5 GHz �142 dBm �140 dBm �145 dBm 26.5 to 34 GHz �140 dBm �138 dBm �144 dBm 34 to 40 GHz �136 dBm �133 dBm �140 dBm 40 to 44 GHz �135 dBm �132 dBm �140 dBm 2.5� INPUTS AND OUTPUTS 2.5.1� Front panel RF input Connector: 2.4mm, 50 ? (nominal) 2.5.2� Rear Panel 10 MHz out � Connector � Output amplitude � Frequency BNC female, 50 ? (nominal) ? 0 dBm (nominal) 10 MHz � (10 MHz x frequency reference accuracy) Ext Ref In � Connector � Input amplitude range � Input frequency � Frequency lock range BNC female, 50 ? (nominal) �5 to 10 dBm (nominal) 1 to 50 MHz (nominal) � 2 x 10�6 of ideal external reference input frequency Trigger 1 / 2 inputs Connector Impedance Trigger level range BNC female 10 k? nominal �5 to +5 V Trigger 1 / 2 outputs Connector Impedance Level BNC female 50 ? nominal 0 to 5 V (CMOS) USB ports compatible with USB 3.0 2.6� I/Q ANALYZER 2.6.1.� Frequency span � 10 Hz to 85 MHz 2.6.2� Resolution Bandwidth Range Overall 100 mHz to 3 MHz Span = 1 MHz 50 Hz to 1 MHz Span = 10 kHz 1 Hz to 10 kHz Span = 100 Hz 100 mHz to 100 Hz 2.6.3� Data acquisition (standard 10 MHz IF path) Time record length (minimum) 4,000,000 IQ sample pairs Sample rate (minimum) 100 MSa/s ADC resolution (minimum) 12 Bits 2.7� Preamplifier 2.7.1� Gain 100 kHz to 3.6 GHz +20 dB (nominal) 3.6 to 26.5 GHz +35 dB (nominal) 26.5 to 44 GHz +40 dB (nominal) 2.7.2� Noise Figure 100 kHz to 3.6 GHz 11 dB (nominal) 3.6 to 8.4 GHz 9 dB (nominal) 8.4 to 26.5 GHz 10 dB (nominal) 26.5 to 44 GHz DANL + 176.24 dB (nominal) 3. CALIBRATION� - An ANSI Z540-1-1994 calibration/certificate shall be provided with the unit. 4. �INFORMATION ASSURANCE REQUIREMENTS: This system will operate in stand-alone mode only (no network connection of any kind).� If there becomes such a time where this system requires the use of another PC (laptop, tablet, etc.) or network connection it will conform to all requisite DoD and Army cybersecurity requirements.� Additionally, since this system operates in stand-alone mode there will be no ability to connect via either wireless (e.g Bluetooth) or wired (e.g. Ethernet cable), to a network.� If these parameters change then the system will be subject to Change Configuration Board (CCB) approval for operation. 5.� WARRANTY:� A one year minimum warranty shall be furnished with the provided equipment.� The warranty shall cover all components.� The warranty period begins when the LEAD Contracting Officer provides official confirmation that the equipment has satisfied all operational provisions of the contract. 6.� PRESERVATION, PACKAGING AND DELIVERY: The contractor shall utilize standard commercial methods for preservation and packaging appropriate for the provided equipment and acceptable to commercial carriers. As a minimum, all areas susceptible to damage from exposure to the elements shall be preserved and/or packed to prevent damage.� The contractor shall be responsible for ensuring the equipment is delivered to LEAD in good condition. 7.� INSPECTION AND ACCEPTANCE:� The provided equipment shall be examined for design, construction, materials, components, and workmanship to determine compliance with the contract and this specification.� Any deviation from these requirements shall be cause for rejection.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/6e26b782a0e64defbe279f1092e67770/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06625877-F 20230323/230321230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |