SPECIAL NOTICE
99 -- TECHNOLOGY/BUSINESS OPPORTUNITY Novel siloxane formulations and methods for 3D printable silicones inks used in direct ink writing (DIW)
- Notice Date
- 3/22/2023 12:50:17 PM
- Notice Type
- Special Notice
- NAICS
- 325211
— Plastics Material and Resin Manufacturing
- Contracting Office
- LLNS � DOE CONTRACTOR Livermore CA 94551 USA
- ZIP Code
- 94551
- Solicitation Number
- IL-13234Plus
- Response Due
- 3/23/2023 12:00:00 AM
- Archive Date
- 04/24/2023
- Point of Contact
- Genaro Mempin, Phone: 9254231121, Charlotte Eng, Phone: 9254221905
- E-Mail Address
-
mempin1@llnl.gov, eng23@llnl.gov
(mempin1@llnl.gov, eng23@llnl.gov)
- Description
- Opportunity: Lawrence Livermore National Laboratory (LLNL), operated by the Lawrence Livermore National Security (LLNS), LLC under contract no. DE-AC52-07NA27344 (Contract 44) with the U.S. Department of Energy (DOE), is offering the opportunity to enter into a collaboration to further develop and commercialize novel siloxane formulations and methods for 3D printable silicones inks used in direct ink writing (DIW). Background: Additive manufacturing technology is a promising venture wherein there have been noted time savings for production, cost savings on materials and time as well as the capability of fabricating parts that have complex architectures not easily achievable by conventional methods.� Silicone, already used in numerous products, with its exceptional thermal stability, water & chemical resistance, mechanical flexibility, dielectric properties, and biocompatibility characteristics would be an excellent material for use in additive manufacturing.� Using the direct ink write (DIW) process, 3D printing with silicone inks would be ideal for many applications, including advanced material such as soft robotics, biomedical devices, and metamaterials. However, silicone, an inherently flowable liquid, does require modifications to its physical properties in order for it to be a suitable 3D printing feedstock material.� 3D printing silicone ink must exhibit shear-thinning behavior and a transition from a gel to a liquid at high shear rates.� In addition, the gelled state must be able to retain its shape well enough support its own weight during printing.� The interplay between ink development, post-processing, material properties, and performance is a difficult challenge to overcome. Description: LLNL researchers, through careful control over the chemistry, network formation, and crosslink density of the ink formulations as well as introduction of selected additives, have been successful in preparing 3D printable silicone inks with tunable material properties.� For DIW (direct in writing) applications, LLNL has a growing IP portfolio around 3D printable silicone feedstocks for diverse applications.� They include: Custom 3D printable silicone with tunable stiffness with the use of rheological modifying agents.� Intricate structures can be produced by the rendering of a nanoscale network between reinforcement filler and rheological additive, thus allowing shape retention of the printed structure 3D printed transparent siloxanes, in which refractive indices of the siloxane to match the reinforced filler 3D printed porous siloxanes using leachable spherical urea or leachable PVP/glycerol matrix additives that provides tunable porosity and characteristic pore size 3D printed polysiloxane foams with closed-cell pores using hydrogen-blowing agents 3D printed structural siloxanes with controlled release properties by incorporating core-shell microspheres with encapsulated liquid phase Advantages/Benefits:� DIW with silicone inks combines the main advantages of the 3D printing technique and the intrinsic properties of the material. �It allows for the production of 3D printed parts that have complex geometries and intricate structures while also possessing the characteristics of silicone, e.g. excellent thermal stability, resistance to chemical attack and biocompatibility.� LLNL researchers have developed various formulations and methods for 3D printable thixotropic silicone inks that can be modified in various ways depending on the application and/or desired material properties: Formulations of DIW silicone inks can be modified for wide-range of hardness and stiffness. The resin system can be custom-formulated to produce clear 3D printed silicone parts. The siloxane formulation can be modified to accept leachable porogens such as spherical urea particles or PVP/glycerol matrix additive. which would allow for controlled intrastrand porosity. � Formulation of 3D printable siloxane resin could be tuned to accept blowing agents to produce a closed-cell pore structure.� When combined with the void spaces created by the 3D printing process, materials with dynamic, controllable stress responses and lower average densities (compared to conventionally produced hydrogen-blown silicone foam) could be produced. If controlling intra-filament micro-structure is required, microstructure particles could be incorporated into the DIW silicone inks to introduce functionality and specialized properties to the structure that previously were unattainable (e.g. ink loaded with liquid-filled microspheres containing active pharmaceutical ingredients for controlled release drug delivery). Potential Applications:� Electronics, 3D print engineered cellular solids, biomedical devices, prosthetics, metamaterials, space applications, Controlled Release Drug Delivery System (CRDDS), engineered foam structures, shock-absorbing cushions, soft robotics, optics system transparent parts, elastomeric lenses. Development Status:� Current stage of technology development:� TRL 3 Patents: US Patent No. 10,689,491 Silicone formulations for 3D printing issued 06/23/2020 (https://image-ppubs.uspto.gov/dirsearch-public/print/downloadPdf/10689491) US Patent No. 11,180,670 Three-dimensional porous siloxanes using leachable porogen particles issued 11/23/2021 US Patent Application Publication No. 2022/0064463 Three-dimensional porous siloxanes using leachable porogen particles published 3/3/2022 US Patent Application Publication No. 2021/0269659 Three-dimensional printed porous silicone matrix using leachable porogen published 9/2/2021 US Patent Application Publication No. 2020/0190345 Three-dimensional printed gas blown polysiloxane foams published 6/18/2020 US Patent Application Publication No. 2020/0315975 Three-dimensional printed structural siloxanes having controlled drug release published 10/8/2020 US Patent Application Publication No. 2022/0119657 Transparent 3D printed siloxane elastomers published 4/21/2022 LLNL is seeking industry partners with a demonstrated ability to bring such inventions to the market. Moving critical technology beyond the Laboratory to the commercial world helps our licensees gain a competitive edge in the marketplace. All licensing activities are conducted under policies relating to the strict nondisclosure of company proprietary information.� Please visit the IPO website at https://ipo.llnl.gov/resources for more information on working with LLNL and the industrial partnering and technology transfer process. Note:� THIS IS NOT A PROCUREMENT.� Companies interested in commercializing LLNL's novel siloxane formulations and methods for 3D printable silicones inks used in direct ink writing (DIW) should provide a written statement of interest, which includes the following: 1.�������� Company Name and address. 2.�������� The name, address, and telephone number of a point of contact. 3.� � � � �A description of corporate expertise and/or facilities relevant to commercializing this technology. Written responses should be directed to: Lawrence Livermore National Laboratory Innovation and Partnerships Office P.O. Box 808, L-779 Livermore, CA� 94551-0808 Attention:�� IL-13234 Plus Please provide your written statement within thirty (30) days from the date this announcement is published to ensure consideration of your interest in LLNL's novel siloxane formulations and methods for 3D printable silicones inks used in direct ink writing (DIW).
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/5bb003e736b24b03bd9f8e16f655930e/view)
- Place of Performance
- Address: Livermore, CA, USA
- Country: USA
- Country: USA
- Record
- SN06626273-F 20230324/230322230113 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |