SOLICITATION NOTICE
73 -- 73--Kitchen equipment
- Notice Date
- 3/31/2023 11:53:05 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333310
—
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- JBLMISDFPOM230007
- Response Due
- 4/14/2023 8:00:00 AM
- Archive Date
- 10/11/2023
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is JBLMISDFPOM230007 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 333310 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-04-14 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be JBLM, WA 98433 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Equal to but no less than the following. 3 Well drop in hot line. MOD300TDM is a Built-In Top-Mount Electric Food Warmer from Wells that has (3) wells/openings for 12"" x 20"" food pans or equivalent fractional pans. This drop-in warmer is constructed of stainless steel with aluminized steel housing. Each well is controlled individually. Stainless Steel Voltage: 208-240v/60/1-3ph Overall Dimensions: Height: 9-3/4"" Width: 43-1/2"" Depth: 23-5/8 Dimensions (H x W x D) 9.75"" x 43.5"" x 30.56"" Pan Opening Dimensions (L x W) 27"" x 12"" Number of Pans 3 Electric 208-240v/60/1-3ph Watts 1240/1450, 4, EA; LI 002: equal to but no less than the following. 4 well drop in hot line. MOD-400 is a Built-In Top-Mount Insulated Electric Food Warmer from Wells that has (4) wells/openings for 12"" x 20"" food pans or equivalent fractional pans. This drop-in warmer is constructed of stainless steel with aluminized steel housing. Each well is controlled individually. Top-Mount Food Warmer Material: Stainless Steel Infinite Controls Fully Insulated Tubular heating elements Wellslock Standard Openings: 4 High Limits Temperature-Ready Indicator Lights Wet or Dry Operation Deep Drawn Warming Pads Voltage: 208-240v/60/1-3ph Wells MOD-400 Overall Dimensions: Height: 9-3/4"" Width: 57-1/2"" Depth: 23-5/8 Ship Weight 95 LB Manufacturer Wells Model Number MOD-400 Manufacturer Part # MOD-400 Hazardous Materials No Oversized Shipping No Power Type Electric Amps 4.3 - 5.0 Amps Electric 208-240v/60/1-3ph Watts 900 - 1200 Dimensions(HxWxD) 9-3/4"" x 57-1/2"" x 23-5/8"", 5, EA; LI 003: Equal To but no less than the following. 20 QT Mixer. Avantco MX20MGKIT 20 qt. gear-driven commercial planetary mixer! powerful 1.5 hp motor and powerful 3 speeds, it comes equipped with a set of stainless steel accessories, a bowl guard, a meat grinder attachment, and a #12 attachment hub for exceptional versatility. This unit comes with a NEMA 5-15P plug., 1, EA; LI 004: Equal to but no less than the following. Food Preparation Table Length: 72 Inches Width: 30 Inches Height: 34 Inches Work Surface Height: 34 Inches Shelf Capacity: Top Capacity: 750 lb. Heavy Duty Stainless Steel Construction Galvanized Undershelf With Casters, 6, EA; LI 005: Equal to but no less than the following. Refrigerated Display case Advanco GD4C-15-HC black four-sided glass refrigerated. Width 25 1/2 Inches Depth 25 1/2 Inches Height 74 13/16 Inches Interior Width 21 1/16 Inches Interior Depth 21 7/16 Inches Interior Height 48 1/4 Inches Voltage 115 Volts Access Type Doors Capacity 12.625 cu. ft. Color Black Compressor Location Bottom Mounted Display Case Type Refrigerated Door Style Swing Door Type Glass Features LED Lighting Lighted Interior Horsepower 1/3 HP Installation Type Freestanding Interior Color White Number of Doors 1 Doors Number of Shelves 3 Shelves Plug Type NEMA 5-15P Refrigerant Type R-290 Sections 1 Temperature Range 32 - 53 Degrees F Total BTU 1,261 BTU Type Merchandising Refrigeration, 1, EA; LI 006: Equal to but no less than the following. Pastry cart Holds (40) 18"" x 26 "" sheet pans. Enclosed cabinet, front loading design; durable all-welded construction NSF Certified; Proudly made in the USA Holds (40) 18""Wx26""D sheet pans Solid side panels with pan guides on 11/2"" centers Four 5"" swivel casters with non-marking wheels rack is 207/8""Wx275/8""Dx68""H, 2, EA; LI 007: Equal to but no less than the following. Tilting Braising Pan VG40 Natural Gas Material: Stainless Steel Capacity: 40 Gallons 46"" Wide Open Base Manual Tilt 4� Return Flange Spring Assist Cover w/Drip Edge Automatic Burner Light Embossed Gallon Markings Temperature Range: 50�F-425�F Field Reversible L Faucet Mounting Bracket 3/4� Rear Gas Connection Adjustable Flanged Feet Cooking Surface Area: 39"" x 23"" Max Pan Opening: 41"" x 28"" Electric Controls 90,000 BTUs Electrical: 120v/60/1ph, 9 Amps UL Listed CSA Overall Dimensions: Height: 40.5"" Width: 46"" Depth: 35.5"" Base Material Stainless Steel Color Silver NSF Listed No UL Listed Yes Energy Star No Capacity 40 Gallons Cover Type Hinged Apx. Revolutions to Fully Tilt 30 Legs 12"" Dimensions (HxWxD) 40.50"" x 46.00"" x 35.50"" Power Natural Gas Total BTU 120,000 Inlet Size 3/4 Electrical 120v/60/1ph Amps 9, 1, EA; LI 008: Equal to but no less than the following. Drop in Cold Line 3 Well Manufacturer Wells Model Number RCP-300 Manufacturer Part # RCP-300 Hazardous Materials No Oversized Shipping No Country of Origin United States of America Base Material Stainless Steel Color Silver NSF Approved Yes UL Listed Yes Dimensions(HxWxD) 24-1/2"" x 44-3/4"" x 25-3/8"" Installation Type Drop In Control Type Thermostatic Refrigerant Type 134A Temperature Settings Adjustable Number of Pan Wells 3 Pan/Insert Size Full Size Water Pan Required No Power Electric Electric 115v/60/1ph Phase Single Amps 5.5 Horsepower 1/4 Power Cord 8 ft Plug NEMA 5-15P, 1, EA; LI 009: Equal to but no less than the following. Drop in Cold Line 6 well. WELLS 5O-RCP600-120 SPECS Quantity 1/Each Shipping Weight 290 lb. Width 86 Inches Depth 25 3/8 Inches Height 24 1/2 Inches Cutout Width 84 1/2 Inches Cutout Depth 23 7/8 Inches Amps 6.4 Amps Hertz 60 Hertz Phase 1 Phase Voltage 115 Volts Wattage 736 Watts Compressor Location Bottom Mounted Features Made in America NSF Listed Horsepower 1/2 HP Installation Type Drop In Material Stainless Steel Number of Pans 6 Pan Mounting Recessed Plug Type NEMA 5-15P Power Type Electric Refrigerant Type R-404A Refrigeration Type Coil Temperature Settings Adjustable Type Refrigerated Food Wells, 4, EA; LI 010: Shipping, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Reporting During Contract Performance Equal Opportunity
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/840fdeda20f14d7fa41eae3b9387015e/view)
- Place of Performance
- Address: BLDG 9630 I street central receiving , JBLM, WA 98433-9500, USA
- Zip Code: 98433-9500
- Country: USA
- Zip Code: 98433-9500
- Record
- SN06637152-F 20230402/230331230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |