SAMDaily.us | PRESOL | J | Group 11 (Fallon NV) Preventive Maintenance (PM) and Unscheduled Repair Services (URS) of Miscellaneous Food Processing (MFP)

SAMDAILY.US - ISSUE OF APRIL 05, 2023 SAM #7799
SOLICITATION NOTICE

J -- Group 11 (Fallon NV) Preventive Maintenance (PM) and Unscheduled Repair Services (URS) of Miscellaneous Food Processing (MFP)

Notice Date: 4/3/2023 4:55:49 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 811310 — Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Contracting Office: DEFENSE COMMISSARY AGENCY FORT LEE VA 23801-1800 USA
ZIP Code: 23801-1800
Solicitation Number: HQC00423Q0031
Response Due: 4/28/2023 1:00:00 PM
Archive Date: 05/13/2023
Point of Contact: Richard Boehm, Phone: 8047334800086232
E-Mail Address: richard.boehm@deca.mil
(richard.boehm@deca.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. It is the Government's intent to award this requirement using FAR Subpart 13.5 procedures. This announcement constitutes the only solicitation; quotes are being requested and no other written solicitation will not be issued. Quotes shall reference solicitation number HQC00423Q0031. This Request for Quote (RFQ) documents and incorporates provisions and clauses effect through Federal Acquisition Circular (FAC) 2023-01 dated 12/01/2022. The NAICS code is 811310 with a small business size standard of $8 million dollars. The Government intends to award one firm-fixed price contract for one base year and 4 one-year options. The options may be exercised at the discretion of the Government. This solicitation is being issued as 100% total small business set-aside. Description of Requirement: The Defense Commissary Agency (DeCA) store located in Fallon, Nevada have a need for Preventive Maintenance (PM) and Unscheduled Repair Services (URS) of Miscellaneous Food Processing (MFP). Period of Performance (POP): Base Year:� July 1, 2023 � June 30, 2024 Option Year One:� July 1, 2024 � June 30, 2025 Option Year Two:� July1, 2025 � June 30, 2026 Option Year Three:� July 1, 2026 � June 30, 2027 Option Year Four:� July 1, 2027 � June 30, 2028�� Contract Line Items (CLINs) � See attached Excel Spreadsheet to submit pricing. 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services (NOV 2021) applies to this acquisition. ADDENDUM TO FAR 52.212-1 (b)(4) Technical acceptability:� Each offeror shall submit a technical offer, including attachments.� It is imperative that your written technical offer addresses the evaluation factors outlined below in FAR 52.212-2.� The narrative must be written in a clear, concise fashion, describing the technical experience of technicians and how the offeror proposes to perform the requirements.� Offerors are encouraged to arrange site visits to obtain detailed information regarding the equipment shown in the equipment list in the PWS.� Arrangements should be made with the store director at each location.� Store addresses and contact information can be found at https://www.commissaries.com.�� Technical specifications for the equipment covered by this requirement can be found on the Automated Commercial Equipment Description (ACED) website.� Please reference the complete Commercial Equipment Description (CED) of the requested items at https://www.commissaries.com. ��Use the following instructions to navigate the website: (1)�� Go to: https://www.commissaries.com (2)�� Scroll down to �Business with the Defense Commissary Agency� (3)�� Click �Contracting� (4)�� Click �Equipment, Maintenance & Supply (5)�� Scroll down to �Equipment� (6)�� Click �Automated Commissary Equipment Descriptions (ACED) is here� (7)�� Scroll down to �ACED� (8)�� In �Apply� enter the CED number and search (9)�� The CED will open for viewing/printing. CED numbers, for Miscellaneous Food Processing (MFP) covered by this requirement, can be found in the Performance Work Statement (PWS). (b)(6) Price: Provide your best price for each line item and enter the total price for the maximum� quantity for each line item.� Enter all pricing for the base and option years.� Do not price the Material CLINs.� We will use a predetermined amount as a place holder for systems purposes once the contract is awarded.� The vendor will be paid for actual costs for labor and materials as evidenced by supplier invoice for direct labor and materials and supplies used to accomplish repair services supported by a copy attached to the invoice in Wide Area Workflow (WAWF).�� 52.212-2, Evaluation-Commercial Products and Commercial Services (N0V 2021) applies to this acquisition.� The following factors shall be used to evaluate offers:� Technical Acceptability of Service Price Past performance Technical and past performance, when combined, are equally important to price. Award will be made based on price and technical capability of the offeror.� Offeror will be determined to be technically acceptable if their proposed service meet the minimum requirements/standards outlined in the performance work statement FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services (MAY 2022) must be completed and submitted with quote. 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services (NOV 2021) applies to this acquisition. ADDENDUM TO FAR 52.212-4 The following paragraphs have been changed/added to FAR 52.212-4 Terms and Conditions � Commercial Items. �� (c)�� Changes: Administrative Modifications-� �� The government may issue unilateral written modifications that do not affect the substantive rights of the parties.� Examples of administrative modifications are corrections in the payment office address or changes to the accounting and appropriation data.�� Contract modifications will be issued and accessed through the Electronic Document Access System (EDA) via Procurement Integrated Enterprise Environment� (PIEE) https://piee.eb.mil/piee-landing .� Contractors must complete the on-line registration available at the website in order to retrieve documents displayed there.� �� (g)�� Invoice: Procedures- All invoices shall be submitted electronically to DFAS Columbus via Wide Area WorkFlow (WAWF) in accordance with DFARS clause 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports� (DEC 2018). The contract will require the type of invoice to be used as �Invoice and Receiving Report (COMBO)�.� Separate invoices shall be created for each location and service call. The contractor must access the WAWF Vendor Tools on the DFAS website and complete the requirements to obtain an active WAWF account.� This will allow the contractors to submit invoices via WAWF so that payments can be processed electronically through EFT. (i)�� Payment: Procedures-� �� Contract payments will be processed electronically via EFT through the Defense Finance and Accounting Service (DFAS).� Prior to DFAS releasing any contract payment, the contractor must submit a proper invoice using Wide Area Work Flow (WAWF) electronic commerce.� After a proper invoice is received, a Government representative will acknowledge acceptance and receipt.� After all items are properly submitted, the contract payment will be processed via DFAS electronically. Payment status can be obtained by checking the Misc Info Tab on your invoice in WAWF and on the MyInvoice link via Procurement Integrated Enterprise Environment� (PIEE) https://piee.eb.mil/piee-landing. Payment Inquiries:� Payment questions can be addressed by calling DFAS � Columbus, OH Customer Service at 800-756-4571. If you need technical assistance on WAWF, contact: Ogden Help Desk, 866-618-5988. For additional WAWF information, see clause 252.232-7003, ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018). (q)�� Other Compliances:� Labor Poster Information- Clause at 52.222-41, Service Contract Act of 1965, as amended, is applicable to the services performed under this contract.� The contractor is responsible for obtaining and posting the following publications available at http://www.dol.gov/compliance/topics/posters.htm 1.� Employee Rights on Government Contracts (WHD Publication 1313) 2.� Employee Rights under Fair Labor Standards Act (WHD Publication 1088) 3.� Equal Employment Opportunity is the Law (OFCCP 1420) If you are unable to obtain a copy of the applicable posters at the above web site, please contact the Contract Administrator identified on page one of this award document. 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAY 2022) applies to this acquisition. Additional Provisions, Contract Requirements, and Terms and Conditions PROVISIONS AND CLAUSES INCORPORATED BY REFERENCE 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements JAN 2017 52.204-7 System for Award Management OCT 2018 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards JUN 2020 52.204-13 System for Award Management Maintenance OCT 2018 52.204-19 Incorporation by Reference of Representations and Certifications. DEC 2014 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities NOV 2021 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment NOV 2021 52.209-6 ""Protecting the Government's Interest when Subcontracting with Contractors Debarred, Suspended or Proposed for Debarment"" Oct-2015 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations NOV 2015 52.212-1 ""Instructions to Offerors � Commercial Items"" Oct-2018 52.212-4 ""Contract Terms and Conditions -Commercial Items"" Oct-2018 52.219-6 Notice of Total Small Business Set-Aside NOV 2020 52.219-28 ""Post Award Small Business Program Representation"" Jul-2013 52.222-3 Convict Labor JUN 2003 52.222-21 Prohibition of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-37 Employment Reports on Veterans JUN 2020 52.222-40 Notification of Employee Rights Under the National Labor Relations Act DEC 2010 52.222-41 Service Contract Labor Standards AUG 2018 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards- Price Adjustment (Multiple Year and Option Contracts) AUG 2018 52.222-50 Combating Trafficking in Persons DEC 2021 Combating Trafficking in Persons JAN 2019 52.222-55 Minimum Wages Under Executive Order 13658 DEC 2015 52.222-62 Paid Sick Leave Under Executive Order 13706 JAN 2017 52.223-3 Hazardous Material Identification and Material Safety Data JAN 1997 52.223-5 �Pollution Prevention and Right-to-Know Information� MAY 2011 52.223-10 Waste Reduction Program MAY 2011 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving JUN 2020 52.223-20 Aerosols JUN 2016 52.225-13 Restrictions on Certain Foreign Purchases FEB 2021 52.232-18 Availability of Funds APR 1984 52.232-33 Payment by Electronic Funds Transfer--System for Award Management OCT 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2021 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-1 Site Visit APR 1984 52.237-2 Protection of Government Buildings, Equipment, and Vegetation APR 1984 252.201-7000 Contacting Officer�s Representative SEPT 2011 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEPT 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEPT 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7004� Level I Antiterrorism Awareness Training for Contractors FEB 2019 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls OCT 2016 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting DEC 2019 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.216-7009 Allowability of Legal Costs Incurred in Connection with a Whistleblower Proceeding SEP 2013 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 Buy American And Balance of Payments Program MAR 2022 252.225-7002 Qualifying Country Sources as Subcontractors MAR 2022 252.225-7048 Export-Controlled Items JUN 2013 252.232-7010 Levies on Contract Payments DEC 2006 252.239-7001 Information Assurance Contractor Training and Certification JAN 2008 252.243-7001 Pricing of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JUN 2021 CLAUSES INCORPORATED BY FULL TEXT Offeror shall include a completed copy of the provision at 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021), with its offer. Offeror shall include a completed copy of the provision at 52.204-26, Covered Telecommunications Equipment or Services--Representation (OCT 2020), with its offer. Offeror shall include a completed copy of the provision at 52.219-28, Post-Award Small Business Program Representation (Sep 2021), with its offer. 52.217-8 Option to Extend Services (NOV 1999) 52.217-9 Option to Extend the Term of the Contract (MAR 2000) �(a) 30 days; 60 days �(b) If the Government exercises this option, the extended contract shall be considered to include this option clause. �(c) 60 months 52.222-35 Equal Opportunity for Veterans (JUL 2015) 52.222-36 Equal Opportunity for Workers with Disabilities (JUL 2014) 52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2014) Wage Determination No.: 2015-5597 Revision No.: 21 Date of Last Revision: 12/27/2022 52.233-2 Service of Protest (SEP 2006) (a) Evelyn Settles Branch Chief Defense Commissary Agency ATTN: CCQS 1300 E Avenue Fort Lee, Virginia 23801-1800 (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) https://acquisition.gov/browse/index/far https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html 52.252-2 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) https://acquisition.gov/browse/index/far https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html 52.252-6 Authorized Deviations in Clauses (NOV 2020) Defense Federal Acquisition Regulation (48 CFR Chapter 2) 252.211-7007� Reporting of Government-furnished Property (AUG 2012) 252.215-7008� Only One Offer (JUL 2019) 252.232-7003� Electronic Submission of Payment Requests and Receiving Reports (DEC 2018) 252.232-7006 Wide Area Workflow Payment Instructions (DEC 2018) HQCKMF � Fallon Commissary Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC �HQ0866 Issue By DoDAAC �HQC004 Admin DoDAAC** �HQC004 Inspect By DoDAAC �SEE ITEM 2 ABOVE Ship To Code �SEE ITEM 2 ABOVE Ship From Code �N/A Mark For Code �N/A Service Approver (DoDAAC) �SEE ITEM 2 ABOVE Service Acceptor (DoDAAC) �SEE ITEM 2 ABOVE Accept at Other DoDAAC �N/A LPO DoDAAC �N/A DCAA Auditor DoDAAC �N/A Other DoDAAC(s) �N/A IMPORTANT INFORMATION FREEDOM OF INFORMATION ACT (FOIA) SOLICITATION AND CONTRACTS FOIA AND POSTING NOTICE Any award(s) resulting from issuance of this solicitation or quote may be posted in the DeCA Freedom of Information Act (FOIA) electronic reading room at www.commissaries.com.� The posting will contain the total contract award amount, as well as any awarded individual contract line item pricing (CLIN and Sub-CLIN).� Unexercised option prices will not be published. In compliance with the provisions of Executive Order 12600, the contract holder may identify to the agency FOIA Officer (foia@deca.mil), within 21 calendar days of the contract award date, any information contained in the contract that it deems to be confidential commercial information.� The FOIA officer will review the submission and contact the contract holder with a decision.� Failure to identify any such information will be interpreted by the Agency as the contract holder having no such information to identify or withhold from posting in the FOIA electronic reading room. The postings typically take place at a minimum of two distinct points; upon the initial award of the contract and then again after the final option period has been exercised.� However, should a FOIA request for the contract be received in the interim, the contract may be reposted including any awarded contract pricing up to the date of the FOIA request. Unexercised option prices will not be published. This action is being taken to ensure contract award information is available to the general public, as it was in the past, pursuant to the President�s January 21, 2009 memorandum regarding the Freedom of Information Act (FOIA). Defense priorities and Allocating System (DPAP) is not applicable to this solicitation. Please ensure all information requested is included.� Information will be posted to Contract Opportunities: https://sam.gov/content/opportunities. All future information about this acquisition, including amendments, and cancellations will also be distributed through this site.� Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. Vendors shall submit quotes and direct questions pertaining to this solicitation to Richard Boehm via email at richard.boehm@deca.mil. Quotes MUST be good for 90 calendar days after close. Question(s) must be received by 10:00 AM EST on April 17, 2023. The completed solicitation package must be returned no later than 4:00 p.m. Eastern Standard Time (EST) on Apr 28 2023. PERFORMANCE WORK STATEMENT (PWS) Maintenance and Repair of MFP Equipment 1 Introduction Maintenance and repair of MFP equipment at various (DeCA locations. Scope Provide PM and unscheduled repair of MFP equipment, as identified, located at DeCA commissaries. 1.2 Definitions A. Contractor: The party to a contract who is responsible for providing the contracted services. B. Material(s)/Part(s): Includes all items which enable the equipment listed to operate IAW manufacturer's recommendations.� Such items may include but are not limited to: Central Processing Units (CPU), chains, belts, hoses, horizontal slicer blades and various fluids part(s) or material(s). Replacement material(s) shall be OEM compliant, new out of the box, which will allow warranty to stay intact. C.� Trip charge shall be defined as the round-trip travel needed to complete a service call from the home office or service center whichever is closest to the commissary and return to the home office or service center. Contractor may bill for a trip charge for calls made by the stores for estimates that do not ultimately result in a repair. Trip charges shall be firm fixed price and do not apply to PM services. D.� Preventive Maintenance:� Scheduled PM procedures consist of a complete operational check and service of designated equipment to ensure it is maintained in its intended operating condition according to the attached PM checklist.� Labor and supply (lubricants, consumables, bench stock) costs incurred by the contractor in performing PM shall be included in the scheduled PM cost and shall not be charged or reimbursed separately.� E.� The PM process may result in the identification of components which require repair or replacement due to wear and tear, safety, or imminent failure.� All labor and repair parts for additional repairs, as identified during the PM process shall be reported to the store and handled in the same manner as repair parts procedures in Section 3 of this PWS. F.� MFP Equipment: For coverage purposes this Performance Work Statement will cover the following types of equipment: Repair and PM: Saw, meat, band type, DeCA Commissary Equipment Description (CED) 1M18. Mixer / Grinder Systems, Single, DeCA CED 1M20-A. Mixer / Grinder Systems, Tandem DeCA CED 1M20-B. Mixer / Grinder, Industrial, DeCA CED 1M20-HV. Oven, rotary, roll-in, single rack, electric, DeCA CED 1B12-A. Oven, rotary, roll-in, single rack, gas, DeCA CED 1B12-B. Oven, mini-rotary, with proofer, DeCA CED 1B15. Oven, roll in rack, double rack, electric, DeCA CED 1B13-A Oven, roll in rack, double rack, gas, DeCA CED 1B13-B Repair Only: Rotisserie oven, DeCA CED 1D09. Conveyor, meat, portable, inclined, DeCA CED 1M10. Chopper, meat, table model, DeCA CED 1M14. Molder / bulker, meat, attachment, DeCA CED 1M16. Tenderizer, meat, table model, DeCA CED 1M34. Horizontal slicer, meat cleaver, DeCA CED 1M37. Slicer, meat, automatic, DeCA CED 4SMA. Proofer, roll-in, one door, DeCA CED 1B20-A. Proofer, roll-in, two door, DeCA CED 1B20-B. Not all equipment types listed will be at each location.� � � � � � � � � � � � � � � �� Quantities are only provided for items that require PM.� This is done since PMs are provided on a regular basis at a Firm Fixed Price.� A contract modification is required to change the equipment quantity for each store.� Contractor will assume full financial responsibility for PMs performed on equipment above totals listed on the equipment inventory attachment provided (see Attachment A).� Quantities for equipment requiring repair only are not provided.� As long as the equipment count matches the count in the contract, repairs are authorized. 1.3 Key Government Positions A. Contracting Officer (KO): An individual with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.� The term includes certain authorized representatives of the contracting officer acting within the limits of their authority as delegated by the contracting officer. The KO for this contract is shown on page 1 of the contract. B. Contracting Officer's Representative (COR): An individual designated and authorized in writing by the contracting officer to perform specific technical or administrative functions. When the term COR is used elsewhere in this contract, it means the COR as designated by the Contracting Officer. C. Store Director (SD): An individual responsible for overall commissary operations.� When the term SD is used elsewhere in this contract, it means the SD personally or the Acting SD. D. Equipment Maintenance Team (EMT): A Group responsible for administrative work primarily concerned with analyzing, developing, evaluating, or promoting improvements in the policies, plans, methods, procedures, systems, or techniques of an equipment/maintenance program. The Headquarter (HQ) EMT for this contract are: DeCA HQ Equipment Maintenance Team, EquipmentMaintenanceTeamMembers@deca.mil General Requirements Contractor shall provide labor, supervision, equipment, tools, materials, parts, transportation of employees, permits and other items to perform the various services as identified in this PWS.� The contractor shall have access to current technical manuals required to perform the services as stated in this PWS. At time of award and throughout the duration of this contract, the contractor shall ensure that contractor personnel completely understand the requirements of this PWS.� Contractor service technicians shall have certification(s) to service all equipment covered in this PWS and must provide evidence of such certification(s) if requested by the Contracting Officer or COR.� Service technicians shall have a sound mechanical aptitude, ability, and an extensive working knowledge of troubleshooting, diagnosing, and repairing of the equipment included in this PWS. 2.1 Non-Personal Services The government shall neither supervise contractor employees, nor control the method by which the contractor performs the required tasks.� Under no circumstances shall the government assign tasks to, or prepare work schedules for individual contractor employees.� It shall be the responsibility of the contractor to manage its employees and to guard against any actions that are of the nature of personal services, or give the perception of personal services.� If the contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the contractor's responsibility to notify the KO immediately. 2.2 Business Relations The contractor shall work to integrate and coordinate activities needed to execute the requirements of this PWS with the COR and with the HQ EMT as dictated in section 3.� The contractor shall manage the timeliness, completeness and problem identification of equipment issues.� The contractor shall provide corrective action plans, submit quotes, monitor timely identification of issues, and the management of subcontractors if required.� The contractor shall seek to ensure customer satisfaction and present a professional and ethical business behavior. 2.3 Contract Administration and Management The following subsections specify requirements for contract, management and personnel administration. 2.3.1 Contract Management The contractor shall establish clear organizational lines of authority and responsibility to ensure effective management of the resources assigned to the requirement.� The contractor must maintain continuity between the support operations at corresponding DeCA locations, the headquarter level and the contractor's corporate offices. 2.3.2 Contract Administration The contractor shall establish processes and assign appropriate personnel resources to effectively administer the requirements of this contract.� The contractor shall respond to government requests for contractual actions within the time constraints as dictated in section 3. The contractor shall have a single Point of Contact (POC) identified between the government and contractor assigned to support this contract.� The contractor shall assign/direct the work effort and maintain proper and accurate time keeping records of personnel assigned to work on this requirement.� The contractor shall ensure DeCA email addresses are readily available to prevent any loss or delay in communications.� 2.4 Subcontract Management The contractor shall be responsible and accountable for subcontractor performance on this requirement.� The prime contractor shall manage work distribution to ensure there are no Organizational Conflict of Interest (OCI) considerations. Contractors shall notify the KO prior to adding subcontractors to their team. 2.5 Contractor Personnel The following subsections specify requirements for contractor personnel. 2.5.1 Personnel Training The contractor shall accomplish the assigned work with qualified personnel with appropriate combinations of education, training, and experience. 2.5.2 Consumption or Use of Government Property The contractor shall not permit contractor personnel to consume or use government-owned resale items or any government-owned equipment or supplies that are not specifically provided for contractor use under this contract. 2.5.3 Use of Alcoholic Beverages/Drugs The contractor shall not permit contractor employees to work under the influence of alcoholic beverages, cannabis, illegal drugs, or controlled substances.� Contractor personnel are prohibited from using alcoholic beverages, cannabis, illegal drugs or controlled substances while on-duty. 2.5.4 Removal of Employees for Cause The contractor shall immediately bar a contractor employee(s) for the following actions:� deliberate destruction or mishandling of government, patron or vendor property; theft; use of alcoholic beverages; cannabis, illegal drugs or use of controlled substances; performance of work in other than a skillful manner; displaying disruptive/unacceptable behavior (e.g., abusive, demeaning, foul or threatening language and/or fighting) and willful violations of safety standards by contractor personnel. Removal of any employees for such cause shall not constitute a valid basis for non-performance of contract services or a claim for additional compensation. The contractor shall provide written notification to the KO regarding this action. 2.5.5 Installation Access The contractor shall be responsible for obtaining installation access as required for all contractor employees authorized to work at the site specifically for this contract.� Any government furnished identification shall be returned to the government when the contractor employee no longer works for the contractor at this installation or at the end of the contract, whichever comes first.� Military, retired or dependent identification cards are not authorized for use as a means to access the base for performance on this contract.� Additionally, see Federal Acquisition Regulation (FAR) Clause 52.204-9. 2.5.6. Denial of Installation Access Contractor employees may be denied access to the military installation by the installation law enforcement officials if it is determined that such entry may be contrary to good order, discipline or the security of the installation.� The installation may bar contractor employees from entering the military installation under the provisions of Title 18, United States Code Section 1382. 2.5.7. Motor Vehicle Registration Prior to commencing work, contractor employees shall register their vehicles in accordance with (IAW) the installation motor vehicle registration regulations. 2.5.8. Parking The contractor�s employees shall park only in areas designated by the SD or COR. 2.5.9. Shopping Privileges Contractor employees who are authorized to make purchases in commissaries shall show appropriate identification before purchasing commissary items and shall immediately remove the item(s) purchased from the commissary through the main exit door.� Contractor employees with commissary privileges shall shop in the commissary only when they are off-duty.� Contractor personnel with commissary privileges shall not purchase merchandise for consumption by other personnel or organizations not authorized to shop in the commissary. 2.5.10 Identification of Contractor Personnel Contractor personnel shall be easily recognizable by wearing distinctive clothing bearing the name of the company and/or company identification.� Contractor personnel shall wear required government furnished badge at all times during performance of this contract.� Contractor personnel must use Personal Protective Equipment (PPE) as required IAW OSHA 29 Code of Federal Regulations (CFR) 1910.132 to include changes thereafter. 2.6 Location and Hours of Performance The following subsections specify requirements for location and hours of work. 2.6.1. Location of Work The COR will provide a safe work area for the contractor to perform PM or repair services. Though on-site work is required, in the event that it is not feasible, authorization will be obtained by the COR, from the HQ EMT, who will coordinate the transfer of the equipment with DeCA Property Accountability Division (LELP).� The COR will have the vendor complete a DeCA Form 40-108 for equipment removed from the installation.� The DeCA Form 40-108 will be forwarded by HQ EMT to the appropriate POC in the property accountability branch for record keeping purposes. The contractor will notify the COR when equipment will be off-site for a duration exceeding seven (7) calendar days.� The COR will coordinate with HQ EMT if backup equipment is not readily available at the store and determine a plan of action. 2.6.2. Contractor Hours of Work The hours of performance will be Monday through Friday, 8:00 a.m. to 5:00 p.m. local time at the store, excluding federal holidays. Refer to the Office of Personnel Management (OPM) website (http://www.opm.gov/) for a listing of federal holidays.�� Hours shall be recorded and invoiced in 15-minute increments from the time the contractor enters the Commissary until the contractor exits the Commissary.� 2.6.3. Call Center Prior to start of contract performance, the contractor will provide a phone number to the stores listed on the contract. The contractor shall respond at this phone number for service calls during hours of performance. All calls for service will be made to the call center. 2.6.4 Closing for Inclement Weather or Emergency Conditions In the event that inclement weather or other emergency conditions force commissary closure, the COR and contractor�s POC will agree upon the method by which the contractor�s POC will receive notification about closures or delayed reporting times.� The contractor shall provide service as long as the commissa...
Web Link: SAM.gov Permalink
(https://sam.gov/opp/98ae48209a334f9a8e6e6c009e04de82/view)
Place of Performance: Address: USA; Country: USA
Record: SN06637961-F 20230405/230403230108 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

J -- Group 11 (Fallon NV) Preventive Maintenance (PM) and Unscheduled Repair Services (URS) of Miscellaneous Food Processing (MFP)