SOLICITATION NOTICE
84 -- ELECTRICAL OVERALLS
- Notice Date
- 4/6/2023 7:45:19 AM
- Notice Type
- Presolicitation
- NAICS
- 315210
— Cut and Sew Apparel Contractors
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111-5096 USA
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE1C123RX006
- Response Due
- 4/21/2023 12:00:00 PM
- Point of Contact
- MICHAEL O'CONNOR, Phone: 2157372458
- E-Mail Address
-
Michael.e.oconnor@dla.mil
(Michael.e.oconnor@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Correct Notice Number for this presolicitation announcement is: SPE1C123RX007 The proposed acquisition will result in an Indefinite Delivery Purchase Order (IDPO) and covers a requirement for the item: OVERALLS, ELECTRICAL NSN 8415 01 563 3928 Approved CAGE - Part Number ; 44NS5 Paramount Corp DBA Oberon Company TCG40-BIB-M The award will be issued as a simplified acquisition and the total dollar value will not exceed $250,000 for the total of all delivery orders issued during the two-year base period. �The IDPO may have multiple delivery destinations throughout the continental USA. All deliveries will be FOB Destination and Inspection and Acceptance at Destination. Delivery will be required 45 days after the date of award. All materials used in the fabrication are to be furnished by the successful offeror. It is anticipated this solicitation will be posted to the DLA Internet Bid Board System (DIBBS) on or after March 2023. All offerors MUST be registered in The System for Award Management (SAM) in order to be eligible for award. All responsible sources may submit offers which, if timely received, shall be considered. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: �1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. �2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in The System for Award Management (SAM) system. All Contractors must register on the SAM website:� https://www.sam.gov/portal/public/SAM/ in order to be considered for award. �3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their (SAM) registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). Important Note on Foreign Content: �The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as 'The Berry Amendment') impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and 'specialty metals' (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. ����������� DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns, and drawings on our contracting page. To request technical data for this solicitation use the following link to the DLA Troop Support C&T Technical Data Repository area: https://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx ITEM DESCRIPTION: OVERALLS,ELECTRICAL WORKERS RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. Part Numbers: TCG40-BIB-M NSN:8415-01-563-3928 TCG40-BIB-L NSN:8415-01-563-4008 TCG40-BIB-XL NSN:8415-01-563-4011 Cage: 44NS5 BIB-OVERALLS INCLUDE FRT SUSPENDERS AND AN EXPANDABLE PLEAT AT THE WAIST FOR ADJUSTABLE FIT AND COMFORT, ALSO FEATURES WIDE PANT LEGS THAT EASILY SLIDE ON AND OFF, NO OPEN PLEATS TO COMPROMISE SAFETY IF NOT PROPERLY CLOSED BLEND OF 88 PERCENT COTTON AND 12 PERCENT NYLON, 82 PERCENT INHERENTLY FR ARAMID, AND 18 PERCENT MELAMINE MAIN BODY MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE DATED: 27 SEPTEMBER 2019 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS ""PACKING LIST HERE"" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. MIL-STD-147E w/CHANGE 2 27 JUNE 2019 DEPARTMENT OF DEFENSE STANDARD PRACTICE PALLETIZED UNIT LOADS 252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required (ref. T8379; Nov. 08, 2006) ADDITIONAL INFORMATION FOR MIL-STD-2073-1: . NO ADDITIONAL INFORMATION FOLLOWS (Ref. T0898) DELETE CURRENT ""BARCODE LABEL/TAG"" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING: LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL ""UPC"" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM. NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS. THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS: BAR CODE OMITTED OR NOT READABLE BY SCANNER HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075. IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075. Paramount Corp. DBA Oberon Company 44NS5 P/N TCG40-BIB-M
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/26657675d1f544d685c245afdada43fd/view)
- Record
- SN06643763-F 20230408/230406230124 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |