SAMDaily.us | PRESOL | 71 | 71--AECW Administrative Furniture

SAMDAILY.US - ISSUE OF APRIL 16, 2023 SAM #7810
SOLICITATION NOTICE

71 -- 71--AECW Administrative Furniture

Notice Date: 4/14/2023 4:48:46 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 337214 — Office Furniture (except Wood) Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: 04072023001
Response Due: 4/20/2023 9:00:00 AM
Archive Date: 10/17/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 04072023001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 337214 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-04-20 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Edinburgh, IN 46124 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Break Room Table Rounded Square table with X Base, Standard Desk Height 30Wx30D Surface color Walnut Edge Color Walnut X base finish Medium Grey, 2, EA; LI 002: Coffee Table Table, Round, Square Edge, Straight Leg with glides 30W x 12H Laminate material with Walnut Finish Walnut edges Jet Black Legs, 1, EA; LI 003: Side Table Swoop Coffee table, Laminate exposed plywood edge 16"" Diameter Black Legs, 1, EA; LI 004: Admin Chair Knoll Task chair or equal , Height Adjustable arms, plastic base, standard cylinder, no lumbar, hard casters. Black frame Black mesh back Foam seat with black faux leather hard casters height adjustable arms adjustable chair height, 16, EA; LI 005: Knoll Regeneration High Task Chair or Equal Height Adjustable Height Adjustable Arms Hard Casters Frame Dark Base Dark Plastic Flex Back Net color Espresso Flex Seat color Onyx, 3, EA; LI 006: Break Room Chairs Knoll MulitGeneration stacking Chair or Equal Armless Frame Finish is black Shell Color Onyx, 6, EA; LI 007: Lounge Chair Club Chair with Wood Legs 32"" Wide Leg Finish Ebony Split Upholstery Option Inside and cushion fabric design color is Puddle Outside Shell color Bolulevard, 2, EA; LI 008: Sofa 36"" wide Settee with Wood Legs or Equal Leg Finish Ebony Split Upholstery Option Inside and cushion fabric design color is Puddle Outside Shell color Bolulevard, 3, EA; LI 009: Admin desk Knoll series 2 pedestal return with lock, 48Wx24D with series 2 single pedestal Desk with lock, 72Wx30D -- or equal Walnut worksurface with walnut flat walnut edge. L Shaped Medium Grey painted base Locks keyed alike one pedestal should be box/box/file second pedestal should be File/File Privacy front one circular cutout on each work surface located at front center, 1, EA; LI 010: Admin Desk Sit / Stand Knoll series or Equal Main Work Surface shall be 69W x 24D with motorized height adjustable legs. Work Surface Color - Walnut with flat edges in Walnut Legs shall be Mudium Grey Textured Paint Half Modesty panel Second Work Surface shall be 76W x 29D 30H Walnut colored surface with flat walnut edges. Two pedestals will be used. one pedestal should be box/box/file second pedestal should be File/File Pedestals keyed alike, 2, EA; LI 011: Work Station Work Surface shall be 60Wx30D Walnut Colored with flat Walnut edge. Two Pedestals with keyed alike locks. Pedestals will be File/File and Box/box/File. Pedestals will be medium Grey Textured Paint., 2, EA; LI 012: 60"" Credenza File/HA Rectangular work Surface 60Wx 20D x 30H Walnut Colored with two pedestals. One pedestal will be a file/file with black metal interior and the second pedestal will be access pedestal with hinged doors Black metal interior with adjustable metal shelf. Both pedestals will be Walnut colored and , keyed alike., 2, EA; LI 013: 60"" Credenza File/File Rectangular work Surface 60Wx 20D x 30H Walnut Colored with two pedestals. Both pedestals will be a file/file 30Wx19Dx28-3/8H Walnut colored with black metal interior, and a medium grey pull handle, pedestals keyed alike., 1, EA; LI 014: 90"" Credenza HA/Ha/HA Rectangular work surface 90Wx20Dx30H with three pedestals - rectangular work surface 90Wx20Dx1-1/2H Walnut Finish with flat Walnut Edge all pedestals will be access pedestals with hinged doors. 30Wx19Dx28-3/8. Walnut colored black metal interior with adjustable metal shelf medium grey painted pull handle per door. all pedestals keyed alike., 1, EA; LI 015: 90"" Credenza HA/File/HA Rectangular work surface 90Wx20Dx30H with three pedestals - rectangular work surface 90Wx20Dx1-1/2H Walnut Finish with flat Walnut Edge one pedestal will be a file/file 30Wx19Dx28-3/8H Walnut colored with black metal interior, and a medium grey pull handle the 2nd and third pedestals will be access pedestals with hinged doors. 30Wx19Dx28-3/8. Walnut colored black metal interior with adjustable metal shelf medium grey painted pull handle per door. all pedestals keyed alike., 1, EA; LI 016: 5 Section Cubicle Each Cubicle will be 63� tall. Each Cubicle will have the following. One (1) work Surface 72Wx30D with one hole at the center of the surface. Two (2) pedestals. Pedestals will be File/ File and Box/box/File. Pedestal will be medium Grey textured paint. Pedestals will be keyed alike. Cubicle walls will have a fabric finish Pattern/Style Circuit with windows at the top. Cubicle will have one (1) power Outlet and one (1), two (2) port data outlet., 1, EA; LI 017: 3 Section Cubicle Each Cubicle will be 63� tall. Each Cubicle will have the following. One (1) work Surface 72Wx30D with one hole at the center of the surface. Two (2) pedestals. Pedestals will be File/ File and Box/box/File. Pedestal will be medium Grey textured paint. Pedestals will be keyed alike. Cubicle walls will have a fabric finish Pattern/Style Circuit with windows at the top. Cubicle will have one (1) power Outlet and one (1), two (2) port data outlet., 1, EA; LI 018: Reception Desk Reception Desk �L� shaped will have the following. One (1) work Surface 72Wx30D with one hole at the center of the surface. Second Work Surface shall be 36Wx24D. One Counter Worksurface 72Wx15D. Work Surfaces will be walnut Colored with flat walnut edges. Two (2) pedestals. Pedestals will be File/ File and Box/box/File. Pedestal will be medium Grey textured paint. Pedestals will be keyed alike. Cubicle walls will have a fabric finish Pattern/Style Circuit with windows at the top. Cubicle will have one (1) power Outlet and one (1), two (2) port data outlet., 1, EA; LI 019: 2 Section Cubicle Each Cubicle will be 63� tall. Each Cubicle will have the following. One (1) work Surface 72Wx30D with one hole at the center of the surface. Two (2) pedestals. Pedestals will be File/ File and Box/box/File. Pedestal will be medium Grey textured paint. Pedestals will be keyed alike. Cubicle walls will have a fabric finish Pattern/Style Circuit with windows at the top. Cubicle will have one (1) power Outlet and one (1), two (2) port data outlet., 1, EA; LI 020: Free Standing Wall/Partition Set (5 total Panels per Set) Zori Freestanding Screen frosted Acrylic with laminate Lower or Equal. Panel 1 24Dx60Wx66H Paint finish Medium Tone, Laminate Pecan Walnut, Acrylic Frosted Panel 2 230x60Wx66H Paint finish Medium Tone, Laminate Pecan Walnut, Acrylic Frosted Panel 3 (QTY 2) 48Wx66H Paint finish Medium Tone, Laminate Pecan Walnut, Acrylic Frosted Panel 4 60Wx66H Paint finish Medium Tone, Laminate Pecan Walnut, Acrylic Frosted, 2, EA; LI 021: Incidental Installation, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/27accf4cfd414c3784cfcfbcbbd590f2/view)
Place of Performance: Address: 647 Gatling St , Edinburgh, IN 46124, USA; Zip Code: 46124; Country: USA
Record: SN06651656-F 20230416/230414230112 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

71 -- 71--AECW Administrative Furniture