Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 04, 2023 SAM #7859
SOLICITATION NOTICE

44 -- 36C25523Q0493 | Bed Bug Oven | TOP

Notice Date

6/2/2023 10:27:39 AM
 

Notice Type

Presolicitation
 

NAICS

333994 — Industrial Process Furnace and Oven Manufacturing
 

Contracting Office

255-NETWORK CONTRACT OFFICE 15 (36C255) LEAVENWORTH KS 66048 USA
 

ZIP Code

66048
 

Solicitation Number

36C25523Q0493
 

Response Due

6/11/2023 9:00:00 PM
 

Archive Date

06/26/2023
 

Point of Contact

ASHLEY SCHMITT, CONTRACT SPECIALIST, Phone: 913-946-1974
 

E-Mail Address

ASHLEY.SCHMITT@VA.GOV
(ASHLEY.SCHMITT@VA.GOV)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Awardee

null
 

Description

Statement of Work Bed Bug Oven Topeka VA Medical Center Bed bug treatment oven to kill 100% of bed bugs in all life stages, including eggs, nymphs and adults: Inside self-contained heating cabinet needs to be at least 70""H x 34""W x 22""D. Unit shall be mounted on casters. Allow the preprogramming of digital controller with a low temperature (120 degrees) and high temperature (150 degrees) cut off limits and a set point of 130 degrees. Bed Bug Oven needs to be designed to kill bedbugs using a heat treatment cycle of 130°F ± 5°F for a period of 30 minutes. Oven will need to be designed for a single phase, 120/24OVAC, 20A power feed. One 240 VAC, 1700W resistive heater is protected by a two pole 10A circuit breaker and two safety thermal switches wired in series. The temperature of the oven needs to be controlled by a temperature controller in the PLC with a preset temperature set point of 130°F and uses ON/OFF control to reach and maintain the set point. The feedback transducer to the controller needs to be a Type K thermocouple. The temperature controller needs to be controlled by the airflow temperature of the oven and set to a maximum temperature of 170°F. The fan and control electronics need to be powered by 120 VAC through a 1A and 2A circuit breaker, respectively. The fan needs to be configured to remain on after the cycle is complete and turn off when the door is opened, or the ""STOP/RESET"" pushbutton is pressed. The cycle timing of the heat treatment cycle needs to be initiated when the probe temperature of the items being treated reaches and maintains 130°F. When the heat treatment cycle is complete the resistive heaters need to shut off and have a completion indicator. A spare parts package to consist of 1 each: heater element, thermocouple, over-temperature switch, solid state relay and fan unit.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/bab29ae75b96497da63d1e53a257ddbd/view)
 

Place of Performance

Address: COLMERY-O'NEIL VA MEDICAL CENTER 2200 SW GAGE BLVD, Topeka, KS 66622, USA

Zip Code: 66622

Country: USA
 

Record

SN06702938-F 20230604/230602230112 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |