SAMDaily.us | PRESOL | 99 | 99--Steth & Pen Lights-US Army

SAMDAILY.US - ISSUE OF JUNE 23, 2023 SAM #7878
SOLICITATION NOTICE

99 -- 99--Steth & Pen Lights-US Army

Notice Date: 6/21/2023 5:37:32 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 339112 — Surgical and Medical Instrument Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: 141022
Response Due: 7/5/2023 1:30:00 PM
Archive Date: 01/01/2024
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 141022 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-07-05 16:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Ft Knox , KY 40121 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Steth Light*PDF Proof must be submitted within 5 days of award. Physical sample must be provided within 15 days of award.*Steth light shall be black in color. Steth light shall be 2L x .5Wx 2.75H in inches. Steth light shall weigh .5 ounces. Steth light shall have LED light. Steth light shall snap on to a stethoscope chest piece. On the top of the steth light shall read goarmy.com/amedd in white letters. Each Steth light shall be individually wrapped, no twist ties. Each individual bag shall have usage directions. The individually wrapped Steth lights shall then be placed 10 to a master bag before placing the master bags in boxes. PACKING & PALLETIZING INSTRUCTIONS: Packing boxes must be PSI 275 crust test. Each box shall weigh no more than 45 pounds. Boxes shall be placed on a pallet, 48 wide by 40 long with a 4 fork opening. Boxes shall be stabilized with cardboard corner braces on all four corners from top of skid to top layer of boxes. Corner braces shall be strong enough to support pallets being stacked at least two pallets high, without buckling, toppling or crushing. Boxes shall be stacked no higher than 72 on the skid. The loads shall not buckle or shift under pressure. The contractor shall shrink wrap all boxes tight enough onto the skid to prevent boxes from shifting or falling off skid during transport. The contractor shall face boxes on the skid to reflect the label of the box and contains of the box. The contractor shall place at least one label outside of the shrink wrap to identify product inside of boxes. Partial boxes shall be labeled as such and placed on top of the skid. Multiple items shall not be placed on the same pallet, the requirement shall be only one PPI specific item per pallet. A packing list shall accompany each shipment. The packing list shall specify the following: component, quantity per carton, total carton count, total quantity. A standard bill of lading shall not be substituted for a packing list. Pallets will be refused if they do not comply with these instructions or if they are double-stacked.DISTRIBUTION: Ship all items FOB destination to:ACCESSIONS DISTRIBUTION CENTER (ADC)9TH Cavalry Regiment Avenue, Building 210Fort Knox, KY 40121-2726(502) 626-0981/0689The contractor shall make shipments to this location on the dates specified in the contract. Receiving hours are 7:30 a.m. to 11:00 a.m. (Eastern Time) and 1:00 p.m. to 3:00 p.m. (Eastern Time), Monday through Friday, excluding legal Federal holidays., 1000, EA; LI 002: Medical Penlight*PDF Proof must be submitted within 5 days of award. Physical sample must be provided within 15 days of award.*Penlight must be 5 in length, approximately .5 around in diameter. The weight of the penlight shall be 60 ounces in weight. LED Bulb shall be 522 VWC-15. LED Lifetime shall be 100,000 hours. Light color shall be white. Lumens shall be 3 lumens. Voltage shall be 3V. Wattage shall be .06 Watts. Penlight must come with batteries to operate. Penlight must have a push on/off button on the top. Penlight must have clip on the top, side. Penlight shall be white in color with US Army logo on the side. The website goarmy.com/amedd must be next to the logo in black color. Colors for the US Army logo are black white and PMC 123C for the yellow. Penlights must be individually wrapped, sealed on all sides. Twist tie seals are not acceptable. Individually wrapped penlights must then be packed in a master box of 10 each before packing into a shipping box. PACKING & PALLETIZING INSTRUCTIONS: Packing boxes must be PSI 275 crust test. Each box shall weigh no more than 45 pounds. Boxes shall be placed on a pallet, 48 wide by 40 long with a 4 forkopening. Boxes shall be stabilized with cardboard corner braces on all four corners from top of skid to top layer of boxes. Corner braces shall be strong enough to support pallets being stacked at least two pallets high, without buckling, toppling or crushing. Boxes shall be stacked no higher than 72 on the skid. The loads shall not buckle or shift under pressure. The contractor shall shrink wrap all boxes tight enough onto the skid to prevent boxes from shifting or falling off skid during transport. The contractor shall face boxes on the skid to reflect the label of the box and contains of the box. The contractor shall place at least one label outside of the shrink wrap to identify product inside of boxes. Partial boxes shall be labeled as such and placed on top of the skid. Multiple items shall not be placed on the same pallet, the requirement shall be only one PPI specific item per pallet. A packing list shall accompany each shipment. The packing list shall specify the following: component, quantity per carton, total carton count, total quantity. A standard bill of lading shall not be substituted for a packing list. Pallets will be refused if they do not comply with these instructions or if they are double-stacked.DISTRIBUTION: Ship all items FOB destination to:ACCESSIONS DISTRIBUTION CENTER (ADC)9TH Cavalry Regiment Avenue, Building 210Fort Knox, KY 40121-2726(502) 626-0981/0689The contractor shall make shipments to this location on the dates specified in the contract. Receiving hours are 7:30 a.m. to 11:00 a.m. (Eastern Time) and 1:00 p.m. to 3:00 p.m. (Eastern Time), Monday through Friday, excluding legal Federal holidays., 1000, EA; Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) codefor this procurement can be found. The small business sizestandard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel CommandOffice of Command Counsel-Deputy Command Counsel4400 Martin RoadRm: A6SE040.001Redstone Arsenal, AL 35898-5000Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.milThe AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of GovernmentBuildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;252.243-7001, Pricing of Contract Modifications; 252.246-7000, Materialinspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/7891bf6023aa466583d67356eda6cba1/view)
Place of Performance: Address: 9th Calvary Regiment Road , Ft Knox , KY 40121, USA; Zip Code: 40121; Country: USA
Record: SN06723401-F 20230623/230621230122 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

99 -- 99--Steth & Pen Lights-US Army