SOLICITATION NOTICE
65 -- GE Mobile C-Arm Table Combined Synopsis-Solicitation Unrestricted/Open Market Brand Name or Equal to (BNOE)
- Notice Date
- 7/12/2023 11:48:12 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339113
— Surgical Appliance and Supplies Manufacturing
- Contracting Office
- 260-NETWORK CONTRACT OFFICE 20 (36C260) VANCOUVER WA 98662 USA
- ZIP Code
- 98662
- Solicitation Number
- 36C26023Q0799
- Response Due
- 7/18/2023 11:59:00 AM
- Archive Date
- 08/02/2023
- Point of Contact
- Scott James, Contract Specialist, Phone: 3608529878, Fax: N/A
- E-Mail Address
-
scott.james@va.gov
(scott.james@va.gov)
- Awardee
- null
- Description
- This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04. This solicitation is set-aside for: Full and Open Competition (Unrestricted/Open Market) (No Set Aside) This solicitation is for: Brand Name Or Equal to equipment. The associated North American Industrial Classification System (NAICS) code for this procurement is 339113 Surgical Appliances and Supplies Manufacturing , with a small business size standard of 800 Employees. The FSC/PSC is 6525. The Mann-Grandstaff VAMC located at 4815 North Assembly Street, Spokane, WA 99205, is seeking to purchase Stille Medstone Elite 4 Movement Mobile C-Arm Table with accessories/components. All interested companies shall provide quotations for the following: Supplies/Services Line Item Description Quantity Unit of Measure Unit Price Total Price 0001 Stille Medstone Elite 4 Movement Mobile C arm Table, Model 0047-TM4ER Part # (S7002EL) 1 ea 0002 Switch, Foot, 4 Movement, Stille Part # (S7002FA) 1 ea 0003 Arm Board, Dual Patient With Pads Part # (S7002FC) 1 ea 0004 Radiation Shield Grey, Stille Part # (S7002MN) 1 ea 0005 STILLE, 505-1137, EXTENSION CABLE FOR HAND CONTROL Part # (S7002PF) 1 ea Salient Characteristics: Brand Name or Equal (BNOE) specifications: Mann Grandstaff VAMC is requesting Brand Name or Equal to items/equipment, GE Stille Medstone Elite 4 Movement Mobile C-arm Table . Equivalent Salient Characteristics: 1. Fluoroscopy compatible table material. 2. Carbon fiber table top with 4-way movement including longitudinal, trendelenburg tilt, lateral tilt and elevation. 3. Rated up to 500 lbs. capacity. 4. Motorized elevating lift travel: ~30 minimum height, 42 maximum travel. 5. Motorized longitudinal travel: ~15.75 . 6. Heavy duty steel base frame, with four (4) independently locking casters. 7. Hand controls for table operation. 8. Foot switch controls. 9. Dual, detachable arm boards. 10. Radiation shields for under table. Equivalent Specifications: - Carbon fiber table top with 4-way movement including longitudinal (extend-retract), trendelenburg tilt, lateral tilt and elevation. - Table top dimensions: 22 x 82 (56 cm x 208 cm) standard tabletop with facial cut-out 29-001 (unless a replacement option table top is selected). - High resolution carbon-fiber table top rated at <1.0 Al equivalency rated at 500 lbs. (227 kg) evenly distributed patient capacity. - 300 mm motorized elevating lift travel: 30 (76 cm) minimum height, 42 (106 cm) maximum travel. - 15.75 (40 cm) motorized longitudinal travel. - Motorized trendelenburg tilting table top, +/- 15 degrees. - Motorized lateral tilting table top, +/- 15 degrees. - Standard control covers. - Heavy duty steel base frame, with four (4) hospital grade independently locking casters. - Motorized elevating lift, rated at 500 lbs. (227 kg) lift capacity. - Power Supply: 110 VAC or 230 VAC operation, 50/60 Hz input. - Warranty: 3 years all parts except Carbon Fiber Table-top, Hand Control Unit, and Table Accessories which fail due to normal use of the product. 1 year warranty on Carbon Fiber Table-top, Hand Control Unit, and Table Accessories. Labor is 3 years. Accessories Included - Sofcare patient table top pad 2 (5 cm) thick. - Hand held controller for all table movements. Requirements: - C-arm table for Pain Procedures to be performed under fluoroscopy. Needed for patient safety, procedure logistics and improved ergonomics for providers for the tabletop with patient on it to be able to move up and down, back and forth, trendelenberg and tilt laterally to either side. 500 lbs capacity necessary for larger patients. Arm boards are needed to support patient arms when patients have shoulder or neck pain issues. Delivery shall be provided no later than 30 days after receipt of order (ARO). FOB: Destination Place of Performance/Place of Delivery Address: Mann-Grandstaff VAMC 4815 North Assembly Street Spokane, WA Postal Code: 99205-6185 Country: UNITED STATES The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following solicitation provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021) Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The version of FAR 52.212-1 in the addendum is tailored for Simplified Acquisition Procedures and supersedes the current version of FAR 52.212-1 contained in the FAR. The following provision is incorporated into 52.212-1 as an addendum to this solicitation: 52.212-1 Instructions to Offerors Commercial Products and Commercial Services (Nov 2021) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the Request for Quote (RFQ). However, the small business size standard for a concern that submits a quote, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition Is set aside for small business and has a value above the simplified acquisition threshold; or Uses the HUBZone price evaluation preference regardless of dollar value, unless the quoter waives the price evaluation preference; or Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value. (b) Submission of Quotes. Submit signed and dated quotes to the office specified in this Request for Quote (RFQ) at or before the exact time specified. Quotes may be submitted on letterhead stationery, or as otherwise specified in the RFQ. As a minimum, quotes must show (1) The solicitation number; (2) The time specified in the solicitation for receipt of quotations; (3) The name, address, and telephone number of the quoter; A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) ""Remit to"" address, if different than mailing address; (8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the quoter shall complete electronically); (9) Acknowledgment Request for Quotation amendments; (10) Past performance will not be considered in simplified acquisition procurements. (11) Quote should include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotes that fail to furnish required representations and certifications, information requested in (1) to (9), and accept the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of Quotes. The quoter agrees to hold the prices in its quote firm for 30 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotes. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender s request and expense, unless they are destroyed during testing. (e) Multiple Quotes. Quoters are encouraged to submit multiple quotes presenting alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each quote submitted will be evaluated separately. (f) Late submissions, revisions, and withdrawals of quotes. (1) Quoters are responsible for submitting quotes so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotes are due. (2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotes is ""late"" and may not be considered unless it is received before purchase order issuance and the Contracting Officer (CO) determines that accepting the late quotation would not unduly delay the acquisition. (3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotes by the exact time specified in the solicitation, and urgent Government requirements preclude a notice of an extension of the closing date, the time specified for receipt of quotes will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (g) Issuance of Purchase Order. The Government may issue a purchase order to one or more quoters as identified in the Request for Quote (RFQ). Therefore, the quoter s initial quote should contain the best terms from a price and technical standpoint. However, the Government may reject any or all quotes if such action is in the public s best interest. The Contracting Officer (CO) may issue a purchase order to other than the quoter with the lowest priced quotation. (h) Multiple awards. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation. (1) Availability of requirements documents cited in the solicitation. (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925, Facsimile (202) 619-8978. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i) ASSIST ( https://assist.dla.mil/online/start/). (ii) Quick Search ( http://quicksearch.dla.mil/). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- (i) Using the ASSIST Shopping Wizard ( https://assist.dla.mil/wizard/index.cfm); (ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Unique entity identifier (UEI). Applies to all quotes that exceed the micro-purchase threshold, and quotes at or below the micro-purchase threshold if the solicitation requires the contractor to be registered in the System for Award Management (SAM).) The quoter must enter, in the block with its name and address on the cover page of its quote, the annotation ""Unique Entity Identifier"" followed by the unique entity identifier that identifies the quoters name and address. The quoter also must enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the UEI. The suffix is assigned at the discretion of the quoter to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the quoter does not have a UEI, it should contact the entity designated at www.sam.gov for UEI establishment directly to obtain one. The quoter should indicate that it is a quoter for a Government contract when contacting the entity designated at www.sam.gov for establishing the UEI. (k) [Reserved] (l) Requests for information. The CO will not notify unsuccessful quoters that responded to this Request for Quotation (RFQ). However, quoters may request information on purchase order(s) resulting from this solicitation with the CO. (End of Provision) FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services. If paragraph (j) of the provision is applicable, a written submission is required. The following contract clauses apply to this acquisition: FAR 52.212-4, Contract Terms and Conditions Commercial Products and Commercial Services (DEC 2022) Contract Terms and Conditions Commercial Products and Commercial Services (Dec 2022) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights- (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act ( 31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include- (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act ( 31 U.S.C.3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. (i) Payment.- (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. (2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act ( 31 U.S.C.3903) and prompt payment regulations at 5 CFR Part 1315. (3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause. (4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made. (5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall- (i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the- (A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); (B) Affected contract number and delivery order number, if applicable; (C) Affected line item or subline item, if applicable; and (D) Contractor point of contact. (ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer. (6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. (iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if (A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; (B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or (C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2). (iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. (v) Amounts shall be due at the earliest of the following dates: (A) The date fixed under this contract. (B) The date of the first written demand for payment, including any demand for payment resulting from a default termination. (vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on- (A) The date on which the designated office receives payment from the Contractor; (B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or (C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. (vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract. (j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon: (1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or (2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. (k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. (l) Termination for the Government s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. (m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. (n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. (o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. (q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract. (r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 4701 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity. (s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) The schedule of supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; (3) The clause at 52.212-5. (4) Addenda to this solicitation or contract, including any license agreements for computer software. (5) Solicitation provisions if this is a solicitation. (6) Other paragraphs of this clause. (7) The Standard Form 1449. (8) Other documents, exhibits, and attachments. (9) The specification. (t) [Reserved] (u) Unauthorized Obligations. (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: (i) Any such clause is unenforceable against the Government. (ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an ""I agree"" click box or other comparable mechanism (e.g., ""click-wrap"" or ""browse-wrap"" agreements), execution does not bind the Government or any Government authorized end user to such clause. (iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. (2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures. (v) Incorporation by reference. The Contractor s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. (End of clause) FAR 52.212-5, Contract Terms and Conditions Requiredto Implement Statutes or Executive Orders Commercial Products and Commercial Services (JUN 2023) The following subparagraphs of FAR 52.212-5 are applicable: 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655). 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15U.S.C. 637(a)(17)). 52.225-5, Trade Agreements (Dec 2022) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) ( 31 U.S.C. 3332). (End of Clause) All quoters shall submit the following: Company name and DUNS. Point of contact name, phone number, and e-mail address. Whether items are presently offered on your current GSA Federal Supply Schedule contract (include contract number) or other Government Contract (such as SEWP). Are you a small business manufacturer? Verification if your company is an authorized distributor/reseller. Priced quote, including delivery lead time. All quotes shall be sent to the Contract Specialist Scott James at scott.james@va.gov NLT 11:59am PST on 7/18/2023. Award will be based upon a comparative evaluation of quotes in accordance...
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/c07bec7362344045a53ecf3ccab27ccf/view)
- Place of Performance
- Address: Mann-Grandstaff VAMC 4815 N. Assembly Street, Spokane 99205-6197, USA
- Zip Code: 99205-6197
- Country: USA
- Zip Code: 99205-6197
- Record
- SN06746241-F 20230714/230712230047 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |